[PATCH v8 08/28] clk: ti: am33xx: add DPLL clock drivers
Dario Binacchi
dariobin at libero.it
Wed Dec 30 00:06:34 CET 2020
The digital phase-locked loop (DPLL) provides all interface clocks and
functional clocks to the processor of the AM33xx device. The AM33xx
device integrates five different DPLLs:
* Core DPLL
* Per DPLL
* LCD DPLL
* DDR DPLL
* MPU DPLL
The patch adds support for the compatible strings:
* "ti,am3-dpll-core-clock"
* "ti,am3-dpll-no-gate-clock"
* "ti,am3-dpll-no-gate-j-type-clock"
* "ti,am3-dpll-x2-clock"
The code is loosely based on the drivers/clk/ti/dpll.c drivers of the
Linux kernel version 5.9-rc7.
For DT binding details see:
- Documentation/devicetree/bindings/clock/ti/dpll.txt
Signed-off-by: Dario Binacchi <dariobin at libero.it>
---
(no changes since v5)
Changes in v5:
- Move the clk-ti-am3-dpll.c file to drivers/clk/ti with the name
clk-am3-dpll.c.
- Move the clk-ti-am3-dpll-x2.c file to drivers/clk/ti with the name
clk-am3-dpll-x2.c.
Changes in v4:
- Include device_compat.h header for dev_xxx macros.
- Fix compilation errors on the dev parameter of the dev_xx macros.
Changes in v3:
- Remove doc/device-tree-bindings/clock/ti,dpll.txt.
- Add to commit message the references to linux kernel dt binding
documentation.
drivers/clk/ti/Kconfig | 7 +
drivers/clk/ti/Makefile | 1 +
drivers/clk/ti/clk-am3-dpll-x2.c | 79 +++++++++
drivers/clk/ti/clk-am3-dpll.c | 268 +++++++++++++++++++++++++++++++
4 files changed, 355 insertions(+)
create mode 100644 drivers/clk/ti/clk-am3-dpll-x2.c
create mode 100644 drivers/clk/ti/clk-am3-dpll.c
diff --git a/drivers/clk/ti/Kconfig b/drivers/clk/ti/Kconfig
index be4f26817f..c430dd9b8a 100644
--- a/drivers/clk/ti/Kconfig
+++ b/drivers/clk/ti/Kconfig
@@ -3,6 +3,13 @@
# Copyright (C) 2020 Dario Binacchi <dariobin at libero.it>
#
+config CLK_TI_AM3_DPLL
+ bool "TI AM33XX Digital Phase-Locked Loop (DPLL) clock drivers"
+ depends on CLK && OF_CONTROL
+ help
+ This enables the DPLL clock drivers support on AM33XX SoCs. The DPLL
+ provides all interface clocks and functional clocks to the processor.
+
config CLK_TI_MUX
bool "TI mux clock driver"
depends on CLK && OF_CONTROL && CLK_CCF
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 5faf68d30e..9e14b83cfe 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -3,4 +3,5 @@
# Copyright (C) 2020 Dario Binacchi <dariobin at libero.it>
#
+obj-$(CONFIG_CLK_TI_AM3_DPLL) += clk-am3-dpll.o clk-am3-dpll-x2.o
obj-$(CONFIG_CLK_TI_MUX) += clk-mux.o
diff --git a/drivers/clk/ti/clk-am3-dpll-x2.c b/drivers/clk/ti/clk-am3-dpll-x2.c
new file mode 100644
index 0000000000..3aa35f0e6c
--- /dev/null
+++ b/drivers/clk/ti/clk-am3-dpll-x2.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TI DPLL x2 clock support
+ *
+ * Copyright (C) 2020 Dario Binacchi <dariobin at libero.it>
+ *
+ * Loosely based on Linux kernel drivers/clk/ti/dpll.c
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <linux/clk-provider.h>
+
+struct clk_ti_am3_dpll_x2_priv {
+ struct clk parent;
+};
+
+static ulong clk_ti_am3_dpll_x2_get_rate(struct clk *clk)
+{
+ struct clk_ti_am3_dpll_x2_priv *priv = dev_get_priv(clk->dev);
+ unsigned long rate;
+
+ rate = clk_get_rate(&priv->parent);
+ if (IS_ERR_VALUE(rate))
+ return rate;
+
+ rate *= 2;
+ dev_dbg(clk->dev, "rate=%ld\n", rate);
+ return rate;
+}
+
+const struct clk_ops clk_ti_am3_dpll_x2_ops = {
+ .get_rate = clk_ti_am3_dpll_x2_get_rate,
+};
+
+static int clk_ti_am3_dpll_x2_remove(struct udevice *dev)
+{
+ struct clk_ti_am3_dpll_x2_priv *priv = dev_get_priv(dev);
+ int err;
+
+ err = clk_release_all(&priv->parent, 1);
+ if (err) {
+ dev_err(dev, "failed to release parent clock\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static int clk_ti_am3_dpll_x2_probe(struct udevice *dev)
+{
+ struct clk_ti_am3_dpll_x2_priv *priv = dev_get_priv(dev);
+ int err;
+
+ err = clk_get_by_index(dev, 0, &priv->parent);
+ if (err) {
+ dev_err(dev, "%s: failed to get parent clock\n", __func__);
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id clk_ti_am3_dpll_x2_of_match[] = {
+ {.compatible = "ti,am3-dpll-x2-clock"},
+ {}
+};
+
+U_BOOT_DRIVER(clk_ti_am3_dpll_x2) = {
+ .name = "ti_am3_dpll_x2_clock",
+ .id = UCLASS_CLK,
+ .of_match = clk_ti_am3_dpll_x2_of_match,
+ .probe = clk_ti_am3_dpll_x2_probe,
+ .remove = clk_ti_am3_dpll_x2_remove,
+ .priv_auto_alloc_size = sizeof(struct clk_ti_am3_dpll_x2_priv),
+ .ops = &clk_ti_am3_dpll_x2_ops,
+};
diff --git a/drivers/clk/ti/clk-am3-dpll.c b/drivers/clk/ti/clk-am3-dpll.c
new file mode 100644
index 0000000000..d50660aae2
--- /dev/null
+++ b/drivers/clk/ti/clk-am3-dpll.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TI DPLL clock support
+ *
+ * Copyright (C) 2020 Dario Binacchi <dariobin at libero.it>
+ *
+ * Loosely based on Linux kernel drivers/clk/ti/dpll.c
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <clk-uclass.h>
+#include <div64.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <hang.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+
+struct clk_ti_am3_dpll_drv_data {
+ ulong max_rate;
+};
+
+struct clk_ti_am3_dpll_priv {
+ fdt_addr_t clkmode_reg;
+ fdt_addr_t idlest_reg;
+ fdt_addr_t clksel_reg;
+ struct clk clk_bypass;
+ struct clk clk_ref;
+ u16 last_rounded_mult;
+ u8 last_rounded_div;
+ ulong max_rate;
+};
+
+static ulong clk_ti_am3_dpll_round_rate(struct clk *clk, ulong rate)
+{
+ struct clk_ti_am3_dpll_priv *priv = dev_get_priv(clk->dev);
+ ulong ret, ref_rate, r;
+ int m, d, err_min, err;
+ int mult = INT_MAX, div = INT_MAX;
+
+ if (priv->max_rate && rate > priv->max_rate) {
+ dev_warn(clk->dev, "%ld is to high a rate, lowered to %ld\n",
+ rate, priv->max_rate);
+ rate = priv->max_rate;
+ }
+
+ ret = -EFAULT;
+ err = rate;
+ err_min = rate;
+ ref_rate = clk_get_rate(&priv->clk_ref);
+ for (d = 1; err_min && d <= 128; d++) {
+ for (m = 2; m <= 2047; m++) {
+ r = (ref_rate * m) / d;
+ err = abs(r - rate);
+ if (err < err_min) {
+ err_min = err;
+ ret = r;
+ mult = m;
+ div = d;
+
+ if (err == 0)
+ break;
+ } else if (r > rate) {
+ break;
+ }
+ }
+ }
+
+ priv->last_rounded_mult = mult;
+ priv->last_rounded_div = div;
+ dev_dbg(clk->dev, "rate=%ld, best_rate=%ld, mult=%d, div=%d\n", rate,
+ ret, mult, div);
+ return ret;
+}
+
+static ulong clk_ti_am3_dpll_set_rate(struct clk *clk, ulong rate)
+{
+ struct clk_ti_am3_dpll_priv *priv = dev_get_priv(clk->dev);
+ u32 v;
+ ulong round_rate;
+
+ round_rate = clk_ti_am3_dpll_round_rate(clk, rate);
+ if (IS_ERR_VALUE(round_rate))
+ return round_rate;
+
+ v = readl(priv->clksel_reg);
+
+ /* enter bypass mode */
+ clrsetbits_le32(priv->clkmode_reg, CM_CLKMODE_DPLL_DPLL_EN_MASK,
+ DPLL_EN_MN_BYPASS << CM_CLKMODE_DPLL_EN_SHIFT);
+
+ /* wait for bypass mode */
+ if (!wait_on_value(ST_DPLL_CLK_MASK, 0,
+ (void *)priv->idlest_reg, LDELAY))
+ dev_err(clk->dev, "failed bypassing dpll\n");
+
+ /* set M & N */
+ v &= ~CM_CLKSEL_DPLL_M_MASK;
+ v |= (priv->last_rounded_mult << CM_CLKSEL_DPLL_M_SHIFT) &
+ CM_CLKSEL_DPLL_M_MASK;
+
+ v &= ~CM_CLKSEL_DPLL_N_MASK;
+ v |= ((priv->last_rounded_div - 1) << CM_CLKSEL_DPLL_N_SHIFT) &
+ CM_CLKSEL_DPLL_N_MASK;
+
+ writel(v, priv->clksel_reg);
+
+ /* lock dpll */
+ clrsetbits_le32(priv->clkmode_reg, CM_CLKMODE_DPLL_DPLL_EN_MASK,
+ DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT);
+
+ /* wait till the dpll locks */
+ if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK,
+ (void *)priv->idlest_reg, LDELAY)) {
+ dev_err(clk->dev, "failed locking dpll\n");
+ hang();
+ }
+
+ return round_rate;
+}
+
+static ulong clk_ti_am3_dpll_get_rate(struct clk *clk)
+{
+ struct clk_ti_am3_dpll_priv *priv = dev_get_priv(clk->dev);
+ u64 rate;
+ u32 m, n, v;
+
+ /* Return bypass rate if DPLL is bypassed */
+ v = readl(priv->clkmode_reg);
+ v &= CM_CLKMODE_DPLL_EN_MASK;
+ v >>= CM_CLKMODE_DPLL_EN_SHIFT;
+
+ switch (v) {
+ case DPLL_EN_MN_BYPASS:
+ case DPLL_EN_LOW_POWER_BYPASS:
+ case DPLL_EN_FAST_RELOCK_BYPASS:
+ rate = clk_get_rate(&priv->clk_bypass);
+ dev_dbg(clk->dev, "rate=%lld\n", rate);
+ return rate;
+ }
+
+ v = readl(priv->clksel_reg);
+ m = v & CM_CLKSEL_DPLL_M_MASK;
+ m >>= CM_CLKSEL_DPLL_M_SHIFT;
+ n = v & CM_CLKSEL_DPLL_N_MASK;
+ n >>= CM_CLKSEL_DPLL_N_SHIFT;
+
+ rate = clk_get_rate(&priv->clk_ref) * m;
+ do_div(rate, n + 1);
+ dev_dbg(clk->dev, "rate=%lld\n", rate);
+ return rate;
+}
+
+const struct clk_ops clk_ti_am3_dpll_ops = {
+ .round_rate = clk_ti_am3_dpll_round_rate,
+ .get_rate = clk_ti_am3_dpll_get_rate,
+ .set_rate = clk_ti_am3_dpll_set_rate,
+};
+
+static int clk_ti_am3_dpll_remove(struct udevice *dev)
+{
+ struct clk_ti_am3_dpll_priv *priv = dev_get_priv(dev);
+ int err;
+
+ err = clk_release_all(&priv->clk_bypass, 1);
+ if (err) {
+ dev_err(dev, "failed to release bypass clock\n");
+ return err;
+ }
+
+ err = clk_release_all(&priv->clk_ref, 1);
+ if (err) {
+ dev_err(dev, "failed to release reference clock\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static int clk_ti_am3_dpll_probe(struct udevice *dev)
+{
+ struct clk_ti_am3_dpll_priv *priv = dev_get_priv(dev);
+ int err;
+
+ err = clk_get_by_index(dev, 0, &priv->clk_ref);
+ if (err) {
+ dev_err(dev, "failed to get reference clock\n");
+ return err;
+ }
+
+ err = clk_get_by_index(dev, 1, &priv->clk_bypass);
+ if (err) {
+ dev_err(dev, "failed to get bypass clock\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static int clk_ti_am3_dpll_ofdata_to_platdata(struct udevice *dev)
+{
+ struct clk_ti_am3_dpll_priv *priv = dev_get_priv(dev);
+ struct clk_ti_am3_dpll_drv_data *data =
+ (struct clk_ti_am3_dpll_drv_data *)dev_get_driver_data(dev);
+
+ priv->max_rate = data->max_rate;
+
+ priv->clkmode_reg = dev_read_addr_index(dev, 0);
+ if (priv->clkmode_reg == FDT_ADDR_T_NONE) {
+ dev_err(dev, "failed to get clkmode register\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "clkmode_reg=0x%08lx\n", priv->clkmode_reg);
+
+ priv->idlest_reg = dev_read_addr_index(dev, 1);
+ if (priv->idlest_reg == FDT_ADDR_T_NONE) {
+ dev_err(dev, "failed to get idlest register\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "idlest_reg=0x%08lx\n", priv->idlest_reg);
+
+ priv->clksel_reg = dev_read_addr_index(dev, 2);
+ if (priv->clksel_reg == FDT_ADDR_T_NONE) {
+ dev_err(dev, "failed to get clksel register\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "clksel_reg=0x%08lx\n", priv->clksel_reg);
+
+ return 0;
+}
+
+static const struct clk_ti_am3_dpll_drv_data dpll_no_gate_data = {
+ .max_rate = 1000000000
+};
+
+static const struct clk_ti_am3_dpll_drv_data dpll_no_gate_j_type_data = {
+ .max_rate = 2000000000
+};
+
+static const struct clk_ti_am3_dpll_drv_data dpll_core_data = {
+ .max_rate = 1000000000
+};
+
+static const struct udevice_id clk_ti_am3_dpll_of_match[] = {
+ {.compatible = "ti,am3-dpll-core-clock",
+ .data = (ulong)&dpll_core_data},
+ {.compatible = "ti,am3-dpll-no-gate-clock",
+ .data = (ulong)&dpll_no_gate_data},
+ {.compatible = "ti,am3-dpll-no-gate-j-type-clock",
+ .data = (ulong)&dpll_no_gate_j_type_data},
+ {}
+};
+
+U_BOOT_DRIVER(clk_ti_am3_dpll) = {
+ .name = "ti_am3_dpll_clock",
+ .id = UCLASS_CLK,
+ .of_match = clk_ti_am3_dpll_of_match,
+ .ofdata_to_platdata = clk_ti_am3_dpll_ofdata_to_platdata,
+ .probe = clk_ti_am3_dpll_probe,
+ .remove = clk_ti_am3_dpll_remove,
+ .priv_auto_alloc_size = sizeof(struct clk_ti_am3_dpll_priv),
+ .ops = &clk_ti_am3_dpll_ops,
+};
--
2.17.1
More information about the U-Boot
mailing list