[PATCH v2 2/2] mx7ulp: Only enable LDO if it is not already enabled

[Fabio Estevam]

Hi Peng,

On Mon, Feb 3, 2020 at 9:07 AM Peng Fan <peng.fan at nxp.com> wrote:

> Just have a question, LDO mode enabled by ROM, this is configured with fuse?

I looked at the fuse map and did not see a fuse that controls it.

> Is there any special configuration need to be done in Linux? I not touch this
> part before (:

In LDO-enabled mode cpufreq needs to be disabled.

Please see:
https://github.com/fabioestevam/linux-imx/commit/8d66e5aae5b32261c9e2757c3844438c98ed0dfe

The reason is that in LDO-enabled mode only RUN mode at 500MHz is supported.

HSRUN at 720MHz is not supported in LDO-enabled mode, so ROM boots at
500MHz and kernel keeps always running at this frequency.

Regards,

Fabio Estevam


>
> Thanks,
> Peng.
>
> > ---
> > Changes since v1:
> > - Drop the define changes as they are duplicated (Stefano).
> >
> >  arch/arm/mach-imx/mx7ulp/soc.c | 25 ++++++++++++++-----------
> >  1 file changed, 14 insertions(+), 11 deletions(-)
> >
> > diff --git a/arch/arm/mach-imx/mx7ulp/soc.c
> > b/arch/arm/mach-imx/mx7ulp/soc.c index d8d691692c..0d39dab7ea 100644
> > --- a/arch/arm/mach-imx/mx7ulp/soc.c
> > +++ b/arch/arm/mach-imx/mx7ulp/soc.c
> > @@ -118,12 +118,26 @@ void init_wdog(void)
> >       disable_wdog(WDG2_RBASE);
> >  }
> >
> > +static bool ldo_mode_is_enabled(void)
> > +{
> > +     unsigned int reg;
> > +
> > +     reg = readl(PMC0_BASE_ADDR + PMC0_CTRL);
> > +     if (reg & PMC0_CTRL_LDOEN)
> > +             return true;
> > +     else
> > +             return false;
> > +}
> > +
> >  #if !defined(CONFIG_SPL) || (defined(CONFIG_SPL) &&
> > defined(CONFIG_SPL_BUILD))  #if defined(CONFIG_LDO_ENABLED_MODE)
> > static void init_ldo_mode(void)  {
> >       unsigned int reg;
> >
> > +     if (ldo_mode_is_enabled())
> > +             return;
> > +
> >       /* Set LDOOKDIS */
> >       setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL,
> > PMC0_CTRL_LDOOKDIS);
> >
> > @@ -193,17 +207,6 @@ const char *get_imx_type(u32 imxtype)
> >       return "7ULP";
> >  }
> >
> > -static bool ldo_mode_is_enabled(void)
> > -{
> > -     unsigned int reg;
> > -
> > -     reg = readl(PMC0_BASE_ADDR + PMC0_CTRL);
> > -     if (reg & PMC0_CTRL_LDOEN)
> > -             return true;
> > -     else
> > -             return false;
> > -}
> > -
> >  int print_cpuinfo(void)
> >  {
> >       u32 cpurev;
> > --
> > 2.17.1
>