[PATCHv5 1/5] mmc: meson-gx: Fix clk phase tuning for MMC

[Jerome Brunet]

On Mon 03 Feb 2020 at 16:13, Anand Moon <linux.amoon at gmail.com> wrote:

> As per mainline line kernel fix the clk tuning phase for mmc,
> set Core=180, Tx=180, Rx=0 clk phase for mmc initialization.
> As per S905, S905X, AGX and S922X datasheet set the default
> values for clk tuning.
>
> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> ---
>  arch/arm/include/asm/arch-meson/sd_emmc.h | 28 ++++++++++++------
>  drivers/mmc/meson_gx_mmc.c                | 36 +++++++++++++++++++----
>  2 files changed, 50 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-meson/sd_emmc.h b/arch/arm/include/asm/arch-meson/sd_emmc.h
> index e3a72c8b66..b7a99947b3 100644
> --- a/arch/arm/include/asm/arch-meson/sd_emmc.h
> +++ b/arch/arm/include/asm/arch-meson/sd_emmc.h
> @@ -7,6 +7,7 @@
>  #define __SD_EMMC_H__
>  
>  #include <mmc.h>
> +#include <linux/bitops.h>
>  
>  #define SDIO_PORT_A			0
>  #define SDIO_PORT_B			1
> @@ -19,15 +20,24 @@
>  #define   CLK_MAX_DIV			63
>  #define   CLK_SRC_24M			(0 << 6)
>  #define   CLK_SRC_DIV2			(1 << 6)
> -#define   CLK_CO_PHASE_000		(0 << 8)
> -#define   CLK_CO_PHASE_090		(1 << 8)
> -#define   CLK_CO_PHASE_180		(2 << 8)
> -#define   CLK_CO_PHASE_270		(3 << 8)
> -#define   CLK_TX_PHASE_000		(0 << 10)
> -#define   CLK_TX_PHASE_090		(1 << 10)
> -#define   CLK_TX_PHASE_180		(2 << 10)
> -#define   CLK_TX_PHASE_270		(3 << 10)
> -#define   CLK_ALWAYS_ON			BIT(24)
> +
> +#define   CRYSTAL_24MHZ			0
> +#define   CLK_PHASE_0			0
> +#define   CLK_PHASE_180			2
> +
> +#define   CLK_DIV_MASK			GENMASK(5, 0)
> +#define   CLK_SRC_MASK			GENMASK(7, 6)
> +#define   CLK_CORE_PHASE_MASK		GENMASK(9, 8)
> +#define   CLK_TX_PHASE_MASK		GENMASK(11, 10)
> +#define   CLK_RX_PHASE_MASK		GENMASK(13, 12)
> +
> +#define   CLK_V2_TX_DELAY_MASK		GENMASK(19, 16)
> +#define   CLK_V2_RX_DELAY_MASK		GENMASK(23, 20)
> +#define   CLK_V2_ALWAYS_ON		BIT(24)
> +
> +#define   CLK_V3_TX_DELAY_MASK		GENMASK(21, 16)
> +#define   CLK_V3_RX_DELAY_MASK		GENMASK(27, 22)
> +#define   CLK_V3_ALWAYS_ON		BIT(28)
>  
>  #define MESON_SD_EMMC_CFG		0x44
>  #define   CFG_BUS_WIDTH_MASK		GENMASK(1, 0)
> diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
> index 86c1a7164a..03fb70e717 100644
> --- a/drivers/mmc/meson_gx_mmc.c
> +++ b/drivers/mmc/meson_gx_mmc.c
> @@ -16,6 +16,10 @@
>  #include <asm/arch/sd_emmc.h>
>  #include <linux/log2.h>
>  
> +#include <linux/bitops.h>
> +#include <linux/compat.h>
> +#include <linux/bitfield.h>
> +
>  static inline void *get_regbase(const struct mmc *mmc)
>  {
>  	struct meson_mmc_platdata *pdata = mmc->priv;
> @@ -51,11 +55,33 @@ static void meson_mmc_config_clock(struct mmc *mmc)
>  	}
>  	clk_div = DIV_ROUND_UP(clk, mmc->clock);
>  
> -	/* 180 phase core clock */
> -	meson_mmc_clk |= CLK_CO_PHASE_180;
> -
> -	/* 180 phase tx clock */
> -	meson_mmc_clk |= CLK_TX_PHASE_000;
> +	/* Clock divider */
> +	meson_mmc_clk |= CLK_DIV_MASK;
> +	/* Clock source : Crystal 24MHz */
> +	meson_mmc_clk |= FIELD_PREP(CLK_SRC_MASK, CRYSTAL_24MHZ);
> +	/* Core clock phase 2:180 */
> +	meson_mmc_clk |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180);
> +	/* TX clock phase 2:180 */
> +	meson_mmc_clk |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_180);

I think I mentionned already but this is not aligned with the setting
used by the linux driver. If you have problems with these, please report
it to the linux mailing list

> +	/* RX clock phase 0:180 */
> +	meson_mmc_clk |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0);
> +
> +#ifdef CONFIG_MESON_GX
> +	/* TX clock delay line */
> +	meson_mmc_clk |= CLK_V2_TX_DELAY_MASK;
> +	/* RX clock delay line */
> +	meson_mmc_clk |= CLK_V2_RX_DELAY_MASK;

Why do you need to this ?

> +	/* clk always on */
> +	meson_mmc_clk |= CLK_V2_ALWAYS_ON;
> +#endif
> +#if (defined(CONFIG_MESON_AXG) || defined(CONFIG_MESON_G12A))
> +	/* TX clock delay line */
> +	meson_mmc_clk |= CLK_V3_TX_DELAY_MASK;
> +	/* RX clock delay line */
> +	meson_mmc_clk |= CLK_V3_RX_DELAY_MASK;
> +	/* clk always on */
> +	meson_mmc_clk |= CLK_V3_ALWAYS_ON;
> +#endif
>  
>  	/* clock settings */
>  	meson_mmc_clk |= clk_src;