[PATCH v4 1/4] sunxi: board: extract creating a unique sid into a helper function
Andre Heider
a.heider at gmail.com
Tue Feb 4 10:37:55 CET 2020
Refactor setup_environment() so we can use the created sid for a
Bluetooth address too.
Signed-off-by: Andre Heider <a.heider at gmail.com>
Acked-by: Maxime Ripard <mripard at kernel.org>
---
board/sunxi/board.c | 105 ++++++++++++++++++++++++--------------------
1 file changed, 58 insertions(+), 47 deletions(-)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 6afea6ef42..e670793479 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -770,6 +770,38 @@ static void parse_spl_header(const uint32_t spl_addr)
env_set_hex("fel_scriptaddr", spl->fel_script_address);
}
+static bool get_unique_sid(unsigned int *sid)
+{
+ if (sunxi_get_sid(sid) != 0)
+ return false;
+
+ if (!sid[0])
+ return false;
+
+ /*
+ * The single words 1 - 3 of the SID have quite a few bits
+ * which are the same on many models, so we take a crc32
+ * of all 3 words, to get a more unique value.
+ *
+ * Note we only do this on newer SoCs as we cannot change
+ * the algorithm on older SoCs since those have been using
+ * fixed mac-addresses based on only using word 3 for a
+ * long time and changing a fixed mac-address with an
+ * u-boot update is not good.
+ */
+#if !defined(CONFIG_MACH_SUN4I) && !defined(CONFIG_MACH_SUN5I) && \
+ !defined(CONFIG_MACH_SUN6I) && !defined(CONFIG_MACH_SUN7I) && \
+ !defined(CONFIG_MACH_SUN8I_A23) && !defined(CONFIG_MACH_SUN8I_A33)
+ sid[3] = crc32(0, (unsigned char *)&sid[1], 12);
+#endif
+
+ /* Ensure the NIC specific bytes of the mac are not all 0 */
+ if ((sid[3] & 0xffffff) == 0)
+ sid[3] |= 0x800000;
+
+ return true;
+}
+
/*
* Note this function gets called multiple times.
* It must not make any changes to env variables which already exist.
@@ -780,61 +812,40 @@ static void setup_environment(const void *fdt)
unsigned int sid[4];
uint8_t mac_addr[6];
char ethaddr[16];
- int i, ret;
+ int i;
- ret = sunxi_get_sid(sid);
- if (ret == 0 && sid[0] != 0) {
- /*
- * The single words 1 - 3 of the SID have quite a few bits
- * which are the same on many models, so we take a crc32
- * of all 3 words, to get a more unique value.
- *
- * Note we only do this on newer SoCs as we cannot change
- * the algorithm on older SoCs since those have been using
- * fixed mac-addresses based on only using word 3 for a
- * long time and changing a fixed mac-address with an
- * u-boot update is not good.
- */
-#if !defined(CONFIG_MACH_SUN4I) && !defined(CONFIG_MACH_SUN5I) && \
- !defined(CONFIG_MACH_SUN6I) && !defined(CONFIG_MACH_SUN7I) && \
- !defined(CONFIG_MACH_SUN8I_A23) && !defined(CONFIG_MACH_SUN8I_A33)
- sid[3] = crc32(0, (unsigned char *)&sid[1], 12);
-#endif
-
- /* Ensure the NIC specific bytes of the mac are not all 0 */
- if ((sid[3] & 0xffffff) == 0)
- sid[3] |= 0x800000;
+ if (!get_unique_sid(sid))
+ return;
- for (i = 0; i < 4; i++) {
- sprintf(ethaddr, "ethernet%d", i);
- if (!fdt_get_alias(fdt, ethaddr))
- continue;
+ for (i = 0; i < 4; i++) {
+ sprintf(ethaddr, "ethernet%d", i);
+ if (!fdt_get_alias(fdt, ethaddr))
+ continue;
- if (i == 0)
- strcpy(ethaddr, "ethaddr");
- else
- sprintf(ethaddr, "eth%daddr", i);
+ if (i == 0)
+ strcpy(ethaddr, "ethaddr");
+ else
+ sprintf(ethaddr, "eth%daddr", i);
- if (env_get(ethaddr))
- continue;
+ if (env_get(ethaddr))
+ continue;
- /* Non OUI / registered MAC address */
- mac_addr[0] = (i << 4) | 0x02;
- mac_addr[1] = (sid[0] >> 0) & 0xff;
- mac_addr[2] = (sid[3] >> 24) & 0xff;
- mac_addr[3] = (sid[3] >> 16) & 0xff;
- mac_addr[4] = (sid[3] >> 8) & 0xff;
- mac_addr[5] = (sid[3] >> 0) & 0xff;
+ /* Non OUI / registered MAC address */
+ mac_addr[0] = (i << 4) | 0x02;
+ mac_addr[1] = (sid[0] >> 0) & 0xff;
+ mac_addr[2] = (sid[3] >> 24) & 0xff;
+ mac_addr[3] = (sid[3] >> 16) & 0xff;
+ mac_addr[4] = (sid[3] >> 8) & 0xff;
+ mac_addr[5] = (sid[3] >> 0) & 0xff;
- eth_env_set_enetaddr(ethaddr, mac_addr);
- }
+ eth_env_set_enetaddr(ethaddr, mac_addr);
+ }
- if (!env_get("serial#")) {
- snprintf(serial_string, sizeof(serial_string),
- "%08x%08x", sid[0], sid[3]);
+ if (!env_get("serial#")) {
+ snprintf(serial_string, sizeof(serial_string),
+ "%08x%08x", sid[0], sid[3]);
- env_set("serial#", serial_string);
- }
+ env_set("serial#", serial_string);
}
}
--
2.24.1
More information about the U-Boot
mailing list