[PATCH 1/4] i2c: Make deblock delay and SCL clock configurable

[Marek Vasut]

Make the delay between SCL line changes and the number of SCL clock
changes configurable as a parameter of the deblock function. No
functional change.

Signed-off-by: Marek Vasut <marex at denx.de>
---
 drivers/i2c/i2c-uclass.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c
index 2aa3efe8aa..25af1fabdb 100644
--- a/drivers/i2c/i2c-uclass.c
+++ b/drivers/i2c/i2c-uclass.c
@@ -502,34 +502,35 @@ static int i2c_gpio_get_pin(struct gpio_desc *pin)
 }
 
 static int i2c_deblock_gpio_loop(struct gpio_desc *sda_pin,
-				 struct gpio_desc *scl_pin)
+				 struct gpio_desc *scl_pin,
+				 unsigned int scl_count,
+				 unsigned int delay)
 {
-	int counter = 9;
 	int ret = 0;
 
 	i2c_gpio_set_pin(sda_pin, 1);
 	i2c_gpio_set_pin(scl_pin, 1);
-	udelay(5);
+	udelay(delay);
 
 	/*  Toggle SCL until slave release SDA */
-	while (counter-- >= 0) {
+	while (scl_count-- >= 0) {
 		i2c_gpio_set_pin(scl_pin, 1);
-		udelay(5);
+		udelay(delay);
 		i2c_gpio_set_pin(scl_pin, 0);
-		udelay(5);
+		udelay(delay);
 		if (i2c_gpio_get_pin(sda_pin))
 			break;
 	}
 
 	/* Then, send I2C stop */
 	i2c_gpio_set_pin(sda_pin, 0);
-	udelay(5);
+	udelay(delay);
 
 	i2c_gpio_set_pin(scl_pin, 1);
-	udelay(5);
+	udelay(delay);
 
 	i2c_gpio_set_pin(sda_pin, 1);
-	udelay(5);
+	udelay(delay);
 
 	if (!i2c_gpio_get_pin(sda_pin) || !i2c_gpio_get_pin(scl_pin))
 		ret = -EREMOTEIO;
@@ -561,7 +562,7 @@ static int i2c_deblock_gpio(struct udevice *bus)
 		goto out_no_pinctrl;
 	}
 
-	ret0 = i2c_deblock_gpio_loop(&gpios[PIN_SDA], &gpios[PIN_SCL]);
+	ret0 = i2c_deblock_gpio_loop(&gpios[PIN_SDA], &gpios[PIN_SCL], 9, 5);
 
 	ret = pinctrl_select_state(bus, "default");
 	if (ret) {
-- 
2.24.1