[Patch v2 2/2] configs: ls2080ardb: Make BOOT command access flash memory as per spi-mem

Kuldeep Singh kuldeep.singh at nxp.com
Mon Feb 10 07:56:38 CET 2020


BOOT command currently access spi-nor flash memory directly. As per spi-mem
framework, flash memory access via absolute addresses is no more possible.
Use flash APIs to access memory instead of directly using it.

Signed-off-by: Kuldeep Singh <kuldeep.singh at nxp.com>
---
v2:
-Rebase to top
-Reword commit message

 include/configs/ls2080ardb.h | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 7a8168b..eae753d 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -505,9 +505,11 @@ unsigned long get_board_sys_clk(void);
 #ifdef CONFIG_TFABOOT
 #define QSPI_NOR_BOOTCOMMAND						\
 			"env exists mcinitcmd && env exists secureboot "\
-			"&& esbc_validate 0x206C0000; "			\
+			"&& sf read 0x806c0000 0x6c0000 0x40000 "	\
+			"&& esbc_validate 0x806C0000; "			\
 			"env exists mcinitcmd && "			\
-			"fsl_mc lazyapply dpl 0x20d00000; "		\
+			"sf read 0x80d00000 0xd00000 0x100000; "	\
+			"fsl_mc lazyapply dpl 0x80d00000; "		\
 			"run distro_bootcmd;run qspi_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 
@@ -535,9 +537,11 @@ unsigned long get_board_sys_clk(void);
 /* Try to boot an on-QSPI kernel first, then do normal distro boot */
 #define CONFIG_BOOTCOMMAND						\
 			"env exists mcinitcmd && env exists secureboot "\
-			"&& esbc_validate 0x206C0000; "			\
+			"&& sf read 0x806c0000 0x6c0000 0x40000 "	\
+			"&& esbc_validate 0x806C0000; "			\
 			"env exists mcinitcmd && "			\
-			"fsl_mc lazyapply dpl 0x20d00000; "		\
+			"sf read 0x80d00000 0xd00000 0x100000 && "	\
+			"fsl_mc lazyapply dpl 0x80d00000; "		\
 			"run distro_bootcmd;run qspi_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 #elif defined(CONFIG_SD_BOOT)
-- 
2.7.4



More information about the U-Boot mailing list