[GIT PULL] Pull request: u-boot-imx u-boot-imx-20200210
Stefano Babic
sbabic at denx.de
Mon Feb 10 14:52:47 CET 2020
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit e1dff2d69e5a21a61c3eb28e5d230a6d48749b6c:
Merge branch '2020-02-07-master-imports' (2020-02-07 19:04:23 -0500)
are available in the Git repository at:
https://gitlab.denx.de/u-boot/custodians/u-boot-imx.git
tags/u-boot-imx-20200210
for you to fetch changes up to a19d73708fc017475e5635b4809b6b07c6a61afd:
board: ge: bx50v3, imx53ppd: configure CONFIG_SYS_BOOTMAPSZ
(2020-02-09 21:47:20 +0100)
----------------------------------------------------------------
- Convert to DM:
- bx50v3, mx53ppd, novena, mx6sabresd
- Fixes for Xea Board
- Toradex im8m Verdin
- Cleanup (warp7, mx6sxsabresd)
Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/648131788
----------------------------------------------------------------
Alifer Moraes (1):
mx6sabresd: Convert PCI to driver model
Anatolij Gustschin (1):
imx: mx6ul_14x14_evk: turn of backlight and LCD before booting OS
Fabio Estevam (5):
gpio: Let DM_74X164 be built without CONFIG_SPL_GPIO
mx6ul_14x14_evk: Move CONFIG_DM_74X164 to defconfig
mx6sxsabresd: Keep only one target
mx7ulp_com: Remove unneeded SoC definitions
mx6sabre_common: Remove FEC related settings
Heiko Schocher (1):
imx6: aristainetos: fix NAND detection with latest mainline
Ian Ray (4):
board: ge: mx53ppd: enable DM_VIDEO
board: ge: bx50v3: override panel
board: ge: mx53ppd: use DM for uart
board: ge: bx50v3, imx53ppd: configure CONFIG_SYS_BOOTMAPSZ
Igor Opaniuk (3):
board: toradex: Add Verdin iMX8M Mini support
board: toradex: verdin-imx8mm: add README
board: toradex: verdin-imx8mm: add MAINTAINERS
Joel Johnson (1):
cmd: mdc/mwc: normalize disjoint MX_CYCLIC usage
Joris Offouga (4):
warp7: Fix the pmic_get() parameter in the DM case
warp7: remove unused usb configs
arm: dts: imx7s-warp7: Move u-boot specific node in u-boot.dtsi
mx7dsabre: Fix usbtog probe when use dfu or ums
Lukasz Majewski (5):
arm: xea: defconfig: Define space for redundant envs in SPI-NOR flash
arm: xea: Provide function to set L2 switch 'local-mac-address'
property
arm: xea: config: Enable support for XEA board specific device
tree tweaks
arm: xea: spl: Add GPIO0_0 setup on spl_board_init
arm: xea: dts: Add 'fec-3v3' regulator properties to prevent
accidental disablement
Marcel Ziswiler (4):
arm: dts: imx8mm-pinfunc: sync latest linux-next pin func header
toradex: tdx-cfg-block: add Apalis iMX8X support
toradex: tdx-cfg-block: add Verdin iMX8M Mini/Nano support
imx: imx8mm_evk: spelling in readme file
Marek Vasut (3):
ARM: imx: novena: Move defconfig bits to arch Kconfig
ARM: imx: novena: Enable DM ethernet
ARM: imx: novena: Enable DM thermal
Robert Beckett (9):
misc: i2c_eeprom: set offset len and chip addr offset mask
board: ge: bx50v3, imx53ppd: add eeprom partitions
board: ge: bx50v3, imx53ppd: use DM I2C
board: ge: bx50v3: add i2c eeprom bootcount storage
board: ge: mx53ppd: add i2c eeprom bootcount storage
board: ge: bx50v3: Enable DM PWM for backlight
board: ge: mx53ppd: Use DM for ethernet
board: ge: bx50v3: use DM for uart
board: ge: bx50v3, mx53ppd: fix firstboot detection
Sébastien Szymanski (1):
tools: imx8m_image: fix warning message
README | 2 +-
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx28-xea.dts | 2 +
arch/arm/dts/imx53-ppd-uboot.dtsi | 46 ++
arch/arm/dts/imx53-ppd.dts | 5 +-
arch/arm/dts/imx6q-b450v3.dts | 2 +
arch/arm/dts/imx6q-b650v3.dts | 2 +
arch/arm/dts/imx6q-b850v3.dts | 2 +
arch/arm/dts/imx6q-bx50v3-uboot.dtsi | 25 ++
arch/arm/dts/imx6q-bx50v3.dtsi | 3 +-
arch/arm/dts/imx7d-sdb-u-boot.dtsi | 4 +
arch/arm/dts/imx7s-warp-u-boot.dtsi | 10 +
arch/arm/dts/imx7s-warp.dts | 9 -
arch/arm/dts/imx8mm-pinfunc.h | 20 +-
arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 103 +++++
arch/arm/dts/imx8mm-verdin.dts | 1007
+++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/imx8m/Kconfig | 7 +
arch/arm/mach-imx/mx6/Kconfig | 9 +
board/aristainetos/aristainetos.c | 2 +-
board/freescale/imx8mm_evk/README | 2 +-
board/freescale/mx6sabresd/mx6sabresd.c | 11 -
board/freescale/mx6sxsabresd/MAINTAINERS | 1 -
board/freescale/mx6sxsabresd/mx6sxsabresd.c | 236 ----------
board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 9 +
board/ge/bx50v3/Kconfig | 2 -
board/ge/bx50v3/bx50v3.c | 219 ++-------
board/ge/common/Kconfig | 14 -
board/ge/common/ge_common.c | 17 +-
board/ge/common/vpd_reader.c | 37 +-
board/ge/mx53ppd/Kconfig | 2 -
board/ge/mx53ppd/Makefile | 2 +-
board/ge/mx53ppd/mx53ppd.c | 67 +--
board/ge/mx53ppd/mx53ppd_video.c | 125 ++----
board/ge/mx53ppd/ppd_gpio.h | 8 -
board/liebherr/xea/xea.c | 49 +-
board/toradex/common/tdx-cfg-block.c | 39 +-
board/toradex/common/tdx-cfg-block.h | 7 +-
board/toradex/verdin-imx8mm/Kconfig | 30 ++
board/toradex/verdin-imx8mm/MAINTAINERS | 9 +
board/toradex/verdin-imx8mm/Makefile | 11 +
board/toradex/verdin-imx8mm/README | 88 ++++
board/toradex/verdin-imx8mm/imximage.cfg | 16 +
board/toradex/verdin-imx8mm/lpddr4_timing.c | 1850
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/toradex/verdin-imx8mm/spl.c | 180 ++++++++
board/toradex/verdin-imx8mm/verdin-imx8mm.c | 73 +++
board/warp7/warp7.c | 2 +-
cmd/Kconfig | 8 +-
cmd/mem.c | 8 +-
configs/M5249EVB_defconfig | 2 +-
configs/amcore_defconfig | 2 +-
configs/bcm11130_defconfig | 2 +-
configs/bcm11130_nand_defconfig | 2 +-
configs/bcm23550_w1d_defconfig | 2 +-
configs/bcm28155_ap_defconfig | 2 +-
configs/bcm28155_w1d_defconfig | 2 +-
configs/bcm911360_entphn-ns_defconfig | 2 +-
configs/bcm911360_entphn_defconfig | 2 +-
configs/bcm911360k_defconfig | 2 +-
configs/bcm958300k-ns_defconfig | 2 +-
configs/bcm958300k_defconfig | 2 +-
configs/bcm958305k_defconfig | 2 +-
configs/bcm958622hr_defconfig | 2 +-
configs/da850evm_defconfig | 2 +-
configs/da850evm_direct_nor_defconfig | 2 +-
configs/da850evm_nand_defconfig | 2 +-
configs/ge_bx50v3_defconfig | 27 +-
configs/imx28_xea_defconfig | 3 +
configs/k2e_evm_defconfig | 2 +-
configs/k2e_hs_evm_defconfig | 2 +-
configs/k2g_evm_defconfig | 2 +-
configs/k2g_hs_evm_defconfig | 2 +-
configs/k2hk_evm_defconfig | 2 +-
configs/k2hk_hs_evm_defconfig | 2 +-
configs/k2l_evm_defconfig | 2 +-
configs/k2l_hs_evm_defconfig | 2 +-
configs/legoev3_defconfig | 2 +-
configs/mx53ppd_defconfig | 31 +-
configs/mx6sabresd_defconfig | 1 +
configs/mx6sxsabresd_spl_defconfig | 69 ---
configs/mx6ul_14x14_evk_defconfig | 1 +
configs/novena_defconfig | 12 +-
configs/omapl138_lcdk_defconfig | 2 +-
configs/verdin-imx8mm_defconfig | 98 ++++
configs/x600_defconfig | 2 +-
configs/xtfpga_defconfig | 2 +-
drivers/gpio/Makefile | 4 +-
drivers/misc/i2c_eeprom.c | 35 ++
include/configs/ge_bx50v3.h | 49 +-
include/configs/mx53ppd.h | 76 +---
include/configs/mx6sabre_common.h | 8 -
include/configs/mx6sabreauto.h | 8 +
include/configs/mx6sabresd.h | 9 +
include/configs/mx6ul_14x14_evk.h | 5 -
include/configs/mx7ulp_com.h | 4 -
include/configs/novena.h | 9 +-
include/configs/verdin-imx8mm.h | 128 ++++++
include/configs/warp7.h | 4 -
tools/imx8m_image.sh | 6 +-
98 files changed, 4107 insertions(+), 921 deletions(-)
create mode 100644 arch/arm/dts/imx7s-warp-u-boot.dtsi
create mode 100644 arch/arm/dts/imx8mm-verdin-u-boot.dtsi
create mode 100644 arch/arm/dts/imx8mm-verdin.dts
delete mode 100644 board/ge/common/Kconfig
create mode 100644 board/toradex/verdin-imx8mm/Kconfig
create mode 100644 board/toradex/verdin-imx8mm/MAINTAINERS
create mode 100644 board/toradex/verdin-imx8mm/Makefile
create mode 100644 board/toradex/verdin-imx8mm/README
create mode 100644 board/toradex/verdin-imx8mm/imximage.cfg
create mode 100644 board/toradex/verdin-imx8mm/lpddr4_timing.c
create mode 100644 board/toradex/verdin-imx8mm/spl.c
create mode 100644 board/toradex/verdin-imx8mm/verdin-imx8mm.c
delete mode 100644 configs/mx6sxsabresd_spl_defconfig
create mode 100644 configs/verdin-imx8mm_defconfig
create mode 100644 include/configs/verdin-imx8mm.h
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list