[PATCH] configs: ls1046a: Define ENV_ADDR value

[Kuldeep Singh]

CONFIG_ENV_ADDR helps in picking environment from flash before DDR init.
Define value 0x40300000 in QSPI defconfig for LS1046ARDB as value is
already defined in TFA.

Correct ENV_ADDR and ENV_SECT_SIZE value for LS1046AQDS as per defconfig.

Signed-off-by: Kuldeep Singh <kuldeep.singh at nxp.com>
---
 configs/ls1046aqds_qspi_defconfig | 3 ++-
 configs/ls1046aqds_tfa_defconfig  | 4 ++--
 configs/ls1046ardb_qspi_defconfig | 1 +
 3 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig
index 22904a0..1f28ad5 100644
--- a/configs/ls1046aqds_qspi_defconfig
+++ b/configs/ls1046aqds_qspi_defconfig
@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1046AQDS=y
 CONFIG_SYS_TEXT_BASE=0x40100000
 CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_FSL_LS_PPA=y
 CONFIG_NR_DRAM_BANKS=2
@@ -31,6 +31,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:2m(uboot),14m(free)"
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_ADDR=0x40300000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig
index df85533..18e3993 100644
--- a/configs/ls1046aqds_tfa_defconfig
+++ b/configs/ls1046aqds_tfa_defconfig
@@ -3,7 +3,7 @@ CONFIG_TARGET_LS1046AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_ENV_OFFSET=0x500000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
@@ -39,7 +39,7 @@ CONFIG_ENV_IS_IN_NAND=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_USE_ENV_SPI_BUS=y
 CONFIG_ENV_SPI_BUS=0
-CONFIG_ENV_ADDR=0x60500000
+CONFIG_ENV_ADDR=0x40500000
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
index d5e0f02..d836421 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -28,6 +28,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.i
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_ADDR=0x40300000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
-- 
2.7.4