[PATCH v4 05/17] dm: Add support for simple-pm-bus
Simon Glass
sjg at chromium.org
Tue Feb 11 18:14:31 CET 2020
Hi Sean,
On Mon, 10 Feb 2020 at 23:05, Sean Anderson <seanga2 at gmail.com> wrote:
>
> This type of bus is used in Linux to designate busses which have power
buses
> domains and/or clocks which need to be enabled before their child devices
> can be used. Because power domains are automatically enabled before
> probing in u-boot, we just need to enable any clocks present.
U-Boot
>
> Signed-off-by: Sean Anderson <seanga2 at gmail.com>
> ---
With the above and below fixed:
Reviewed-by: Simon Glass <sjg at chromium.org>
>
> Changes in v4:
> - Split the bus off into its own driver
> - Add test
> - Fix line spacing in Kconfig
> - Lint
>
> Changes in v3:
> - New
>
> arch/sandbox/dts/test.dts | 6 ++
> arch/sandbox/include/asm/clk.h | 1 +
> configs/sandbox_defconfig | 1 +
> .../bus/simple-pm-bus.txt | 44 +++++++++++++++
> drivers/core/Kconfig | 7 +++
> drivers/core/Makefile | 1 +
> drivers/core/simple-pm-bus.c | 55 +++++++++++++++++++
> test/dm/Makefile | 1 +
> test/dm/simple-pm-bus.c | 44 +++++++++++++++
> 9 files changed, 160 insertions(+)
> create mode 100644 doc/device-tree-bindings/bus/simple-pm-bus.txt
> create mode 100644 drivers/core/simple-pm-bus.c
> create mode 100644 test/dm/simple-pm-bus.c
>
> diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
> index 23f2aefd43..648f21239a 100644
> --- a/arch/sandbox/dts/test.dts
> +++ b/arch/sandbox/dts/test.dts
> @@ -929,6 +929,12 @@
> compatible = "sandbox,mdio";
> };
>
> + pm-bus-test {
> + compatible = "simple-pm-bus";
> + clocks = <&clk_sandbox 4>;
> + power-domains = <&pwrdom 1>;
> + };
> +
> resetc2: syscon-reset {
> compatible = "syscon-reset";
> #reset-cells = <1>;
> diff --git a/arch/sandbox/include/asm/clk.h b/arch/sandbox/include/asm/clk.h
> index 1573e4a134..c184c4bffc 100644
> --- a/arch/sandbox/include/asm/clk.h
> +++ b/arch/sandbox/include/asm/clk.h
> @@ -21,6 +21,7 @@ enum sandbox_clk_id {
> SANDBOX_CLK_ID_I2C,
> SANDBOX_CLK_ID_UART1,
> SANDBOX_CLK_ID_UART2,
> + SANDBOX_CLK_ID_BUS,
>
> SANDBOX_CLK_ID_COUNT,
> };
> diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
> index 19970f1db5..c637b39b96 100644
> --- a/configs/sandbox_defconfig
> +++ b/configs/sandbox_defconfig
> @@ -89,6 +89,7 @@ CONFIG_REGMAP=y
> CONFIG_SYSCON=y
> CONFIG_DEVRES=y
> CONFIG_DEBUG_DEVRES=y
> +CONFIG_SIMPLE_PM_BUS=y
> CONFIG_ADC=y
> CONFIG_ADC_SANDBOX=y
> CONFIG_AXI=y
> diff --git a/doc/device-tree-bindings/bus/simple-pm-bus.txt b/doc/device-tree-bindings/bus/simple-pm-bus.txt
> new file mode 100644
> index 0000000000..6f15037131
> --- /dev/null
> +++ b/doc/device-tree-bindings/bus/simple-pm-bus.txt
> @@ -0,0 +1,44 @@
> +Simple Power-Managed Bus
> +========================
> +
> +A Simple Power-Managed Bus is a transparent bus that doesn't need a real
> +driver, as it's typically initialized by the boot loader.
> +
> +However, its bus controller is part of a PM domain, or under the control of a
> +functional clock. Hence, the bus controller's PM domain and/or clock must be
> +enabled for child devices connected to the bus (either on-SoC or externally)
> +to function.
> +
> +While "simple-pm-bus" follows the "simple-bus" set of properties, as specified
> +in the Devicetree Specification, it is not an extension of "simple-bus".
> +
> +
> +Required properties:
> + - compatible: Must contain at least "simple-pm-bus".
> + Must not contain "simple-bus".
> + It's recommended to let this be preceded by one or more
> + vendor-specific compatible values.
> + - #address-cells, #size-cells, ranges: Must describe the mapping between
> + parent address and child address spaces.
> +
> +Optional platform-specific properties for clock or PM domain control (at least
> +one of them is required):
> + - clocks: Must contain a reference to the functional clock(s),
> + - power-domains: Must contain a reference to the PM domain.
> +Please refer to the binding documentation for the clock and/or PM domain
> +providers for more details.
> +
> +
> +Example:
> +
> + bsc: bus at fec10000 {
> + compatible = "renesas,bsc-sh73a0", "renesas,bsc",
> + "simple-pm-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x20000000>;
> + reg = <0xfec10000 0x400>;
> + interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&zb_clk>;
> + power-domains = <&pd_a4s>;
> + };
> diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
> index 3b95b5387b..0cd687526e 100644
> --- a/drivers/core/Kconfig
> +++ b/drivers/core/Kconfig
> @@ -195,6 +195,13 @@ config SPL_SIMPLE_BUS
> Supports the 'simple-bus' driver, which is used on some systems
> in SPL.
>
> +config SIMPLE_PM_BUS
> + bool "Support simple-pm-bus driver"
> + depends on DM && OF_CONTROL && CLK && POWER_DOMAIN
> + help
> + Supports the 'simple-pm-bus' driver, which is used for busses that
> + have power domains and/or clocks which need to be enabled before use.
> +
> config OF_TRANSLATE
> bool "Translate addresses using fdt_translate_address"
> depends on DM && OF_CONTROL
> diff --git a/drivers/core/Makefile b/drivers/core/Makefile
> index bce7467da1..284af7caaa 100644
> --- a/drivers/core/Makefile
> +++ b/drivers/core/Makefile
> @@ -6,6 +6,7 @@ obj-y += device.o fdtaddr.o lists.o root.o uclass.o util.o
> obj-$(CONFIG_DEVRES) += devres.o
> obj-$(CONFIG_$(SPL_)DM_DEVICE_REMOVE) += device-remove.o
> obj-$(CONFIG_$(SPL_)SIMPLE_BUS) += simple-bus.o
> +obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
> obj-$(CONFIG_DM) += dump.o
> obj-$(CONFIG_$(SPL_TPL_)REGMAP) += regmap.o
> obj-$(CONFIG_$(SPL_TPL_)SYSCON) += syscon-uclass.o
> diff --git a/drivers/core/simple-pm-bus.c b/drivers/core/simple-pm-bus.c
> new file mode 100644
> index 0000000000..3ee54531d1
> --- /dev/null
> +++ b/drivers/core/simple-pm-bus.c
> @@ -0,0 +1,55 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2020 Sean Anderson <seanga2 at gmail.com>
> + */
> +
common.h
> +#include <dm.h>
> +#include <clk.h>
clk.h above dm.h
> +
> +/*
> + * Power domains are taken care of by driver_probe, so we just have to enable
> + * clocks
> + */
> +static const int simple_pm_bus_probe(struct udevice *dev)
> +{
> + int ret;
> + struct clk_bulk *bulk = dev_get_priv(dev);
> +
> + ret = clk_get_bulk(dev, bulk);
> + if (ret)
> + return ret;
> +
> + ret = clk_enable_bulk(bulk);
> + if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
> + clk_release_bulk(bulk);
> + return ret;
> + }
> + return 0;
> +}
> +
> +static const int simple_pm_bus_remove(struct udevice *dev)
> +{
> + int ret;
> + struct clk_bulk *bulk = dev_get_priv(dev);
> +
> + ret = clk_release_bulk(bulk);
> + if (ret && ret != -ENOSYS && ret != -ENOTSUPP)
> + return ret;
> + else
> + return 0;
> +}
> +
> +static const struct udevice_id simple_pm_bus_ids[] = {
> + { .compatible = "simple-pm-bus" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(simple_pm_bus_drv) = {
> + .name = "simple_pm_bus",
> + .id = UCLASS_SIMPLE_BUS,
> + .of_match = simple_pm_bus_ids,
> + .probe = simple_pm_bus_probe,
> + .remove = simple_pm_bus_remove,
> + .priv_auto_alloc_size = sizeof(struct clk_bulk),
> + .flags = DM_FLAG_PRE_RELOC,
> +};
> diff --git a/test/dm/Makefile b/test/dm/Makefile
> index 1f0e0febb4..a760ab8b14 100644
> --- a/test/dm/Makefile
> +++ b/test/dm/Makefile
> @@ -71,4 +71,5 @@ obj-$(CONFIG_DM_MDIO) += mdio.o
> obj-$(CONFIG_DM_MDIO_MUX) += mdio_mux.o
> obj-$(CONFIG_DM_RNG) += rng.o
> obj-$(CONFIG_RESET_SYSCON) += syscon-reset.o
> +obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
> endif
> diff --git a/test/dm/simple-pm-bus.c b/test/dm/simple-pm-bus.c
> new file mode 100644
> index 0000000000..1b42415ccd
> --- /dev/null
> +++ b/test/dm/simple-pm-bus.c
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Sean Anderson <seanga2 at gmail.com>
> + */
> +
Please fix include ordering
https://www.denx.de/wiki/U-Boot/CodingStyle
> +#include <asm/clk.h>
> +#include <asm/power-domain.h>
> +#include <dm.h>
> +#include <dm/test.h>
> +#include <dm/device-internal.h>
> +#include <test/ut.h>
> +
> +/* These must match the ids in the device tree */
> +#define TEST_CLOCK_ID 4
> +#define TEST_POWER_ID 1
> +
> +static int dm_test_simple_pm_bus(struct unit_test_state *uts)
> +{
> + struct udevice *power;
> + struct udevice *clock;
> + struct udevice *bus;
> +
> + ut_assertok(uclass_get_device_by_name(UCLASS_POWER_DOMAIN,
> + "power-domain", &power));
> + ut_assertok(uclass_get_device_by_name(UCLASS_CLK, "clk-sbox",
> + &clock));
> + ut_asserteq(0, sandbox_power_domain_query(power, TEST_POWER_ID));
> + ut_asserteq(0, sandbox_clk_query_enable(clock, TEST_CLOCK_ID));
> +
> + ut_assertok(uclass_get_device_by_name(UCLASS_SIMPLE_BUS, "pm-bus-test",
> + &bus));
> + ut_asserteq(1, sandbox_power_domain_query(power, TEST_POWER_ID));
> + ut_asserteq(1, sandbox_clk_query_enable(clock, TEST_CLOCK_ID));
> +
> + ut_assertok(device_remove(bus, DM_REMOVE_NORMAL));
> + /* must re-probe since device_remove also removes the power domain */
> + ut_assertok(uclass_get_device_by_name(UCLASS_POWER_DOMAIN,
> + "power-domain", &power));
> + ut_asserteq(0, sandbox_power_domain_query(power, TEST_POWER_ID));
> + ut_asserteq(0, sandbox_clk_query_enable(clock, TEST_CLOCK_ID));
> +
> + return 0;
> +}
> +DM_TEST(dm_test_simple_pm_bus, DM_TESTF_SCAN_FDT);
> --
> 2.25.0
>
Regards,
Simon
More information about the U-Boot
mailing list