[PATCH] arm: K3: j721e: Fix boot parameter table index memory address

[Lokesh Vutla]

From: Andreas Dannenberg <dannenberg at ti.com>

The boot parameter table index memory address for J721E was configured
to an incorrect value which prevented the use of this definition to
determine which boot parameter table is active which is needed to be
able to distinguish between primary and backup boot modes. Fix this
issue by updating the value to the correct one also in alignment with
the J721E Technical Reference Manual (TRM).

Signed-off-by: Andreas Dannenberg <dannenberg at ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 arch/arm/mach-k3/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 2e111bbf27..8f4272286c 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -50,7 +50,7 @@ config SYS_K3_MCU_SCRATCHPAD_SIZE
 config SYS_K3_BOOT_PARAM_TABLE_INDEX
 	hex
 	default 0x41c7fbfc if SOC_K3_AM6
-	default 0x41cffc00 if SOC_K3_J721E
+	default 0x41cffbfc if SOC_K3_J721E
 	help
 	  Address at which ROM stores the value which determines if SPL
 	  is booted up by primary boot media or secondary boot media.
-- 
2.23.0