[PATCH v5 09/20] mips: add a option to support not reserving malloc space on initial stack
Weijie Gao
weijie.gao at mediatek.com
Wed Feb 12 10:43:24 CET 2020
The initial stack on some platforms is too small to hold a large malloc
space. This patch adds a option to allow these platforms not reserving the
malloc space on initial stack. These platforms should set the malloc base
after DRAM is usable.
Reviewed-by: Stefan Roese <sr at denx.de>
Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>
---
Changes since v3: none
---
arch/mips/Kconfig | 18 ++++++++++++++++++
arch/mips/cpu/start.S | 6 ++++--
2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index bf30a56101..5f82caf8be 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -317,6 +317,24 @@ config NEW_EXCEPTION_VECTOR_BASE
help
The exception vector base to be restored before booting linux kernel
+config INIT_STACK_WITHOUT_MALLOC_F
+ bool "Do not reserve malloc space on initial stack"
+ default n
+ help
+ Enable this option if you don't want to reserve malloc space on
+ initial stack. This is useful if the initial stack can't hold large
+ malloc space. Platform should set the malloc_base later when DRAM is
+ ready to use.
+
+config SPL_INIT_STACK_WITHOUT_MALLOC_F
+ bool "Do not reserve malloc space on initial stack in SPL"
+ default n
+ help
+ Enable this option if you don't want to reserve malloc space on
+ initial stack. This is useful if the initial stack can't hold large
+ malloc space. Platform should set the malloc_base later when DRAM is
+ ready to use.
+
endmenu
menu "OS boot interface"
diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S
index dd93df9e4a..6de9a2f362 100644
--- a/arch/mips/cpu/start.S
+++ b/arch/mips/cpu/start.S
@@ -59,7 +59,8 @@
sp, sp, GD_SIZE # reserve space for gd
and sp, sp, t0 # force 16 byte alignment
move k0, sp # save gd pointer
-#if CONFIG_VAL(SYS_MALLOC_F_LEN)
+#if CONFIG_VAL(SYS_MALLOC_F_LEN) && \
+ !CONFIG_IS_ENABLED(INIT_STACK_WITHOUT_MALLOC_F)
li t2, CONFIG_VAL(SYS_MALLOC_F_LEN)
PTR_SUBU \
sp, sp, t2 # reserve space for early malloc
@@ -75,7 +76,8 @@
blt t0, t1, 1b
nop
-#if CONFIG_VAL(SYS_MALLOC_F_LEN)
+#if CONFIG_VAL(SYS_MALLOC_F_LEN) && \
+ !CONFIG_IS_ENABLED(INIT_STACK_WITHOUT_MALLOC_F)
PTR_S sp, GD_MALLOC_BASE(k0) # gd->malloc_base offset
#endif
.endm
--
2.17.1
More information about the U-Boot
mailing list