[PATCH v5] Add support for SoM "VoCore2".

[Mauro Condarelli]

Thanks Stefan.

On 2/13/20 7:50 AM, Stefan wrote:
> On 12.02.20 16:30, Mauro Condarelli wrote:
>> Small patch series to add support for VoCore/VoCore2 board.
>>
>> VoCore is open hardware and runs OpenWrt/LEDE.
>> It has WIFI, USB, UART, 20+ GPIOs but is only one inch square.
>> It will help you to make a smart house, study embedded system
>> or even make the tiniest router in the world.
>>
>> Details about this SoM can be found at "https://vocore.io/v2.html".
>>
>> Signed-off-by: Mauro Condarelli <mc5686 at mclink.it>
>> ---
>>
>> Changes in v5:
>> - Removed unneeded (and wrong) UART2 initialization in board.c
>> - Added network setup.
>> - Removed project-specific code.
>> - Move back environment to SPI NOR.
>> - Changes to environment default settings.
>> - Rebase on current u-boot-mips/testing
>>
>> Changes in v4:
>> - Reverted some overzealous DTS cleaning.
>> - Added support for bootcount
>>
>> Changes in v3:
>> - based on top of Weijie Gao patchset:
>>      "[v3,xx/20]Refactor the architecture parts of mt7628"
>>
>> Changes in v2:
>> - Removed some dead code
>> - Changed Author to my full name (no nick)
>> - Removed unwanted fixup to .dts generation (not my call).
>> - Fixed commit message
>> - Fixed various variables/filenames to include Vendor name
>> - Changed Vendor name (Vonger -> Vocore)
>>
>>   arch/mips/dts/Makefile               |   1 +
>>   arch/mips/dts/mt7628a.dtsi           |   5 ++
>>   arch/mips/dts/vocore_vocore2.dts     |  78 ++++++++++++++++++++
>>   arch/mips/mach-mtmips/Kconfig        |   8 +++
>>   board/vocore/vocore2/Kconfig         |  12 ++++
>>   board/vocore/vocore2/Makefile        |   3 +
>>   board/vocore/vocore2/board.c         |   6 ++
>>   configs/vocore2_defconfig            | 103 ++++++++++++++++++++++++++
>>   configs/vocore2_defconfig_ENV_IN_FAT | 104 +++++++++++++++++++++++++++
>>   include/configs/vocore2.h            |  61 ++++++++++++++++
>>   10 files changed, 381 insertions(+)
>>   create mode 100644 arch/mips/dts/vocore_vocore2.dts
>>   create mode 100644 board/vocore/vocore2/Kconfig
>>   create mode 100644 board/vocore/vocore2/Makefile
>>   create mode 100644 board/vocore/vocore2/board.c
>>   create mode 100644 configs/vocore2_defconfig
>>   create mode 100644 configs/vocore2_defconfig_ENV_IN_FAT
>>   create mode 100644 include/configs/vocore2.h
>
> Apart from the other comments, the MAINTAINERS file is missing. Please
> add it in the next patch version.
Yes, I know.
Also patman was complaining.
I perused MAINTAINERS and it didn't look like specific board
maintainers are in.
I have no problems adding me to the list, but I'm unsure I have
the privilege and it's unclear where I should add myself.

Please advise.

>
> Thanks,
> Stefan
Thanks in Advance
Mauro