[RFC 2/2] Revert "dm: core: device: switch off power domain after device removal"

[Oliver Graute]

On 14/02/20, Lokesh Vutla wrote:
> 
> 
> On 13/02/20 10:42 PM, Neil Armstrong wrote:
> > Hi,
> > 
> > On 03/02/2020 14:59, Oliver Graute wrote:
> >> The conga-imx8 board isn't booting without this revert. Can someone tell me
> >> what I need to Do so that this revert is not necessary?
> 
> Can you give more details on where the failure is happening?(logs would really
> help).

without that revert patch u-boot is stuck at "Starting kernel ..."
Is there a way to get more details here? currently I don't know howto
debug that power-domain stuff deeper.

Bytes transferred = 27030016 (19c7200 hex)
Using ethernet at 5b040000 device
TFTP from server 10.200.134.119; our IP address is 10.200.134.121
Filename 'imx8qm-cgt-qmx8.dtb'.
Load address: 0x83000000
Loading: #####
         2.5 MiB/s
done
Bytes transferred = 21224 (52e8 hex)
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Using Device Tree in place at 0000000083000000, end 00000000830082e7

Starting kernel ...

Best regards,

Oliver