[PATCH 1/2] dm: core: Add a flag for power domain control on device removal

[Anatolij Gustschin]

In various cases a power domain must stay enabled after device
removal when booting OS (i.e. serial debug console or display).
Add a flag to selectively skip switching off a power domain.

Fixes: 52edfed65de9 ("dm: core: device: switch off power domain after device removal")
Signed-off-by: Anatolij Gustschin <agust at denx.de>
---
 drivers/core/device-remove.c | 5 +++--
 include/dm/device.h          | 6 ++++++
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/core/device-remove.c b/drivers/core/device-remove.c
index 444e34b492..ff5b28cb6a 100644
--- a/drivers/core/device-remove.c
+++ b/drivers/core/device-remove.c
@@ -194,8 +194,9 @@ int device_remove(struct udevice *dev, uint flags)
 		}
 	}
 
-	if (!(drv->flags & DM_FLAG_DEFAULT_PD_CTRL_OFF) &&
-	    (dev != gd->cur_serial_dev))
+	if (!(drv->flags &
+	      (DM_FLAG_DEFAULT_PD_CTRL_OFF | DM_FLAG_REMOVE_WITH_PD_ON)) &&
+	    dev != gd->cur_serial_dev)
 		dev_power_domain_off(dev);
 
 	if (flags_remove(flags, drv->flags)) {
diff --git a/include/dm/device.h b/include/dm/device.h
index ab806d0b7e..a56164b19b 100644
--- a/include/dm/device.h
+++ b/include/dm/device.h
@@ -67,6 +67,12 @@ struct driver_info;
 /* Driver platdata has been read. Cleared when the device is removed */
 #define DM_FLAG_PLATDATA_VALID		(1 << 12)
 
+/*
+ * Device is removed without switching off its power domain. This might
+ * be required, i. e. for serial console (debug) output when booting OS.
+ */
+#define DM_FLAG_REMOVE_WITH_PD_ON	(1 << 13)
+
 /*
  * One or multiple of these flags are passed to device_remove() so that
  * a selective device removal as specified by the remove-stage and the
-- 
2.17.1