use invd instead of wbinvd in real mode start code

[Tom Rini]

On Mon, Feb 17, 2020 at 05:33:59PM +0200, Andy Shevchenko wrote:
> On Mon, Feb 17, 2020 at 5:32 PM Andy Shevchenko
> <andy.shevchenko at gmail.com> wrote:
> > On Mon, Feb 17, 2020 at 5:09 PM Wolfgang Denk <wd at denx.de> wrote:
> > > In message <CAHp75VdUY7zJfkc4YV-KTt1aEKg9Ggy6PsJAEOkgo9eCtQx9Kg at mail.gmail.com> you wrote:
> > > >
> > > > > > git bisect is the usual way to figure out the culprit.
> > > > >
> > > > > Too much work to do this way.
> > >
> > > If you find bisecting is too much work you probably still do it
> > > manually. Why don't you use  tbot  to automize such boring and time
> > > consuming tasks?
> >
> > Bisection time something about 10%, while 90% is flashing the board
> > and, given the result, triggering either bad or good next cycle.
> 
> And btw, doing git bisect is not mandatory technique to follow as long
> as I can guarantee the (reproducible) result, right?

No, it's not.  But personally 'git bisect run' and 'git stash' are the
two features that put git far above any other SCM I've used.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200217/171a8d55/attachment.sig>