[PATCH] Revert "dm: core: device: switch off power domain after device removal"

[Neil Armstrong]

Hi Anatolij,

On 17/02/2020 12:53, Anatolij Gustschin wrote:
> On Mon, 17 Feb 2020 10:10:36 +0100
> Neil Armstrong narmstrong at baylibre.com wrote:
> 
>> This commit breaks Linux boot on Amlogic libretech-cc, libretech-ac, sei510,
>> sei610 board by automatically disabling the power domain after device removal.
>> This because the power domain associated to the video driver must be kept
>> enabled for linux to boot.
>>
>> The only way is to use the introduced flag DM_FLAG_DEFAULT_PD_CTRL_OFF, which
>> removes automatic handling of power domain.
>> This flag is not a complete solution since it will force reverting to manually
>> enable the power domain from the driver probe.
>>
>> Instead a flag to keep the power domain enabled after removal should be
>> introduced.
>>
>> In the meantime revert this commit until a proper solution is found.
>>
>> This reverts commit 52edfed65de967a86983a55c51ba0727090efc43.
>>
>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>> ---
>> Hi Simon, Tom,
>>
>> This revert is the simplest fix to make the boards boot again on v2020.04,
>> the goal is to make this behavior happen again with a proper flag to keep the
>> power domain enabled on specific drivers.
>>
>> I can push it on my next PR on my branch, is it ok ?
> 

Thanks for pushing these, they should do the trick.

Let me test them and ack them.

Neil

> Please test if these two patches fix the problem:
>  http://patchwork.ozlabs.org/patch/1239143
>  http://patchwork.ozlabs.org/patch/1239144
> 
> --
> Anatolij
>