[RFC PATCH] net, qe: add DM support for QE UEC ethernet
Heiko Schocher
hs at denx.de
Tue Feb 18 10:05:46 CET 2020
add DM/DTS suppor for the UEC ethernet on QUICC Engine
Block.
Signed-off-by: Heiko Schocher <hs at denx.de>
---
Travis build:
https://travis-ci.org/hsdenx/u-boot-test/builds/651400509
- I let the old none DM based implementation in code
so boards should work with old implementation.
This Code should be removed if all boards are converted
to DM/DTS.
- add the DM based qe uec driver under drivers/net/qe
- Therefore copied the files uccf.c uccf.h uec.h from
drivers/qe. So there are a lot of Codingstyle problems
currently. I fix them in next version if this RFC
patch is OK or it needs some changes.
- The dm based driver code is now under drivers/net/qe/dm_qe_uec.c
Used a lot of functions from drivers/qe/uec.c
- seperated the PHY specific code into seperate file
drivers/net/qe/dm_qe_uec_phy.c
drivers/net/Kconfig | 2 +
drivers/net/Makefile | 1 +
drivers/net/qe/Kconfig | 9 +
drivers/net/qe/Makefile | 5 +
drivers/net/qe/dm_qe_uec.c | 1161 ++++++++++++++++++++++++++++++++
drivers/net/qe/dm_qe_uec.h | 22 +
drivers/net/qe/dm_qe_uec_phy.c | 161 +++++
drivers/net/qe/uccf.c | 388 +++++++++++
drivers/net/qe/uccf.h | 117 ++++
drivers/net/qe/uec.h | 742 ++++++++++++++++++++
drivers/qe/uccf.c | 2 +
drivers/qe/uec.c | 2 +
drivers/qe/uec_phy.c | 3 +
13 files changed, 2615 insertions(+)
create mode 100644 drivers/net/qe/Kconfig
create mode 100644 drivers/net/qe/Makefile
create mode 100644 drivers/net/qe/dm_qe_uec.c
create mode 100644 drivers/net/qe/dm_qe_uec.h
create mode 100644 drivers/net/qe/dm_qe_uec_phy.c
create mode 100644 drivers/net/qe/uccf.c
create mode 100644 drivers/net/qe/uccf.h
create mode 100644 drivers/net/qe/uec.h
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 4d1013c984..6bb84e3d2b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -371,6 +371,8 @@ config MII
help
Enable support of the Media-Independent Interface (MII)
+source "drivers/net/qe/Kconfig"
+
config RTL8139
bool "Realtek 8139 series Ethernet controller driver"
help
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6e0a68834d..cc892d718f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_VSC9953) += vsc9953.o
obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o
obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o
obj-$(CONFIG_FSL_PFE) += pfe_eth/
+obj-y += qe/
obj-$(CONFIG_SNI_AVE) += sni_ave.o
obj-y += ti/
obj-$(CONFIG_MEDIATEK_ETH) += mtk_eth.o
diff --git a/drivers/net/qe/Kconfig b/drivers/net/qe/Kconfig
new file mode 100644
index 0000000000..dec88dea2a
--- /dev/null
+++ b/drivers/net/qe/Kconfig
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020 Heiko Schocher <hs at denx.de>
+
+config QE_UEC
+ bool "NXP QE UEC Ethernet controller"
+ depends on DM_ETH
+ help
+ This driver supports the NXP QE UEC ethernet controller
diff --git a/drivers/net/qe/Makefile b/drivers/net/qe/Makefile
new file mode 100644
index 0000000000..7d84757c17
--- /dev/null
+++ b/drivers/net/qe/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020 Heiko Schocher <hs at denx.de>
+
+obj-$(CONFIG_QE_UEC) += dm_qe_uec.o dm_qe_uec_phy.o uccf.o
diff --git a/drivers/net/qe/dm_qe_uec.c b/drivers/net/qe/dm_qe_uec.c
new file mode 100644
index 0000000000..119e47dc20
--- /dev/null
+++ b/drivers/net/qe/dm_qe_uec.c
@@ -0,0 +1,1161 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * QE UEC ethernet controller driver
+ *
+ * based on drivers/qe/uec.c from NXP
+ *
+ * Copyright (C) 2020 Heiko Schocher <hs at denx.de>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <memalign.h>
+#include <miiphy.h>
+#include <asm/io.h>
+
+#include "dm_qe_uec.h"
+
+#define QE_UEC_DRIVER_NAME "ucc_geth"
+
+/* Default UTBIPAR SMI address */
+#ifndef CONFIG_UTBIPAR_INIT_TBIPA
+#define CONFIG_UTBIPAR_INIT_TBIPA 0x1F
+#endif
+
+static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
+{
+ uec_t *uec_regs;
+ u32 maccfg1;
+
+ uec_regs = uec->uec_regs;
+ maccfg1 = in_be32(&uec_regs->maccfg1);
+
+ if (mode & COMM_DIR_TX) {
+ maccfg1 |= MACCFG1_ENABLE_TX;
+ out_be32(&uec_regs->maccfg1, maccfg1);
+ uec->mac_tx_enabled = 1;
+ }
+
+ if (mode & COMM_DIR_RX) {
+ maccfg1 |= MACCFG1_ENABLE_RX;
+ out_be32(&uec_regs->maccfg1, maccfg1);
+ uec->mac_rx_enabled = 1;
+ }
+
+ return 0;
+}
+
+static int uec_mac_disable(uec_private_t *uec, comm_dir_e mode)
+{
+ uec_t *uec_regs;
+ u32 maccfg1;
+
+ uec_regs = uec->uec_regs;
+ maccfg1 = in_be32(&uec_regs->maccfg1);
+
+ if (mode & COMM_DIR_TX) {
+ maccfg1 &= ~MACCFG1_ENABLE_TX;
+ out_be32(&uec_regs->maccfg1, maccfg1);
+ uec->mac_tx_enabled = 0;
+ }
+
+ if (mode & COMM_DIR_RX) {
+ maccfg1 &= ~MACCFG1_ENABLE_RX;
+ out_be32(&uec_regs->maccfg1, maccfg1);
+ uec->mac_rx_enabled = 0;
+ }
+
+ return 0;
+}
+
+static int uec_restart_tx(uec_private_t *uec)
+{
+ uec_info_t *ui = uec->uec_info;
+ u32 cecr_subblock;
+
+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ui->uf_info.ucc_num);
+ qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
+ (u8)QE_CR_PROTOCOL_ETHERNET, 0);
+
+ uec->grace_stopped_tx = 0;
+
+ return 0;
+}
+
+static int uec_restart_rx(uec_private_t *uec)
+{
+ uec_info_t *ui = uec->uec_info;
+ u32 cecr_subblock;
+
+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ui->uf_info.ucc_num);
+ qe_issue_cmd(QE_RESTART_RX, cecr_subblock,
+ (u8)QE_CR_PROTOCOL_ETHERNET, 0);
+
+ uec->grace_stopped_rx = 0;
+
+ return 0;
+}
+
+static int uec_open(uec_private_t *uec, comm_dir_e mode)
+{
+ ucc_fast_private_t *uccf;
+
+ uccf = uec->uccf;
+
+ /* check if the UCC number is in range. */
+ if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
+ printf("%s: ucc_num out of range.\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Enable MAC */
+ uec_mac_enable(uec, mode);
+
+ /* Enable UCC fast */
+ ucc_fast_enable(uccf, mode);
+
+ /* RISC microcode start */
+ if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx)
+ uec_restart_tx(uec);
+
+ if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx)
+ uec_restart_rx(uec);
+
+ return 0;
+}
+
+static int uec_set_mac_if_mode(uec_private_t *uec)
+{
+ uec_info_t *uec_info = uec->uec_info;
+ phy_interface_t enet_if_mode;
+ uec_t *uec_regs;
+ u32 upsmr;
+ u32 maccfg2;
+
+ uec_regs = uec->uec_regs;
+ enet_if_mode = uec_info->enet_interface_type;
+
+ maccfg2 = in_be32(&uec_regs->maccfg2);
+ maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK;
+
+ upsmr = in_be32(&uec->uccf->uf_regs->upsmr);
+ upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
+
+ switch (uec_info->speed) {
+ case SPEED_10:
+ maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
+ switch (enet_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ upsmr |= (UPSMR_RPM | UPSMR_R10M);
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ upsmr |= (UPSMR_R10M | UPSMR_RMM);
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
+ break;
+ case SPEED_100:
+ maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
+ switch (enet_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ upsmr |= UPSMR_RPM;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ upsmr |= UPSMR_RMM;
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
+ break;
+ case SPEED_1000:
+ maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
+ switch (enet_if_mode) {
+ case PHY_INTERFACE_MODE_GMII:
+ break;
+ case PHY_INTERFACE_MODE_TBI:
+ upsmr |= UPSMR_TBIM;
+ break;
+ case PHY_INTERFACE_MODE_RTBI:
+ upsmr |= (UPSMR_RPM | UPSMR_TBIM);
+ break;
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII:
+ upsmr |= UPSMR_RPM;
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ upsmr |= UPSMR_SGMM;
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
+
+ out_be32(&uec_regs->maccfg2, maccfg2);
+ out_be32(&uec->uccf->uf_regs->upsmr, upsmr);
+
+ return 0;
+}
+
+static int qe_uec_start(struct udevice *dev)
+{
+ struct qe_uec_priv *priv = dev_get_priv(dev);
+ uec_private_t *uec = priv->uec;
+ struct phy_device *phydev = priv->phydev;
+ uec_info_t *uec_info = uec->uec_info;
+ int err;
+
+ if (!phydev)
+ return -ENODEV;
+
+ /* Setup MAC interface mode */
+ genphy_update_link(phydev);
+ genphy_parse_link(phydev);
+ uec_info->speed = phydev->speed;
+ uec_set_mac_if_mode(uec);
+
+ err = uec_open(uec, COMM_DIR_RX_AND_TX);
+ if (err) {
+ printf("%s: cannot enable UEC device\n", dev->name);
+ return -EINVAL;
+ }
+
+ return (phydev->link ? 0 : -EINVAL);
+}
+
+static int qe_uec_send(struct udevice *dev, void *packet, int length)
+{
+ struct qe_uec_priv *priv = dev_get_priv(dev);
+ uec_private_t *uec = priv->uec;
+ ucc_fast_private_t *uccf = uec->uccf;
+ volatile qe_bd_t *bd = uec->txBd;
+ u16 status;
+ int i;
+ int result = 0;
+
+ /* Find an empty TxBD */
+ for (i = 0; bd->status & TxBD_READY; i++) {
+ if (i > 0x100000) {
+ printf("%s: tx buffer not ready\n", dev->name);
+ return result;
+ }
+ }
+
+ /* Init TxBD */
+ BD_DATA_SET(bd, packet);
+ BD_LENGTH_SET(bd, length);
+ status = bd->status;
+ status &= BD_WRAP;
+ status |= (TxBD_READY | TxBD_LAST);
+ BD_STATUS_SET(bd, status);
+
+ /* Tell UCC to transmit the buffer */
+ ucc_fast_transmit_on_demand(uccf);
+
+ /* Wait for buffer to be transmitted */
+ for (i = 0; bd->status & TxBD_READY; i++) {
+ if (i > 0x100000) {
+ printf("%s: tx error\n", dev->name);
+ return result;
+ }
+ }
+
+ /* Ok, the buffer be transimitted */
+ BD_ADVANCE(bd, status, uec->p_tx_bd_ring);
+ uec->txBd = bd;
+ result = 1;
+
+ return result;
+}
+
+/*
+ * Receive frame:
+ * - wait for the next BD to get ready bit set
+ * - clean up the descriptor
+ * - move on and indicate to HW that the cleaned BD is available for Rx
+ */
+static int qe_uec_recv(struct udevice *dev, int flags, uchar **packetp)
+{
+ struct qe_uec_priv *priv = dev_get_priv(dev);
+ uec_private_t *uec = priv->uec;
+ volatile qe_bd_t *bd = uec->rxBd;
+ u16 status;
+ u16 len = 0;
+ u8 *data;
+
+ *packetp = memalign(ARCH_DMA_MINALIGN, MAX_RXBUF_LEN);
+ if (*packetp == 0) {
+ printf("%s: error allocating packetp\n", __func__);
+ return -ENOMEM;
+ }
+
+ bd = uec->rxBd;
+ status = bd->status;
+
+ while (!(status & RxBD_EMPTY)) {
+ if (!(status & RxBD_ERROR)) {
+ data = BD_DATA(bd);
+ len = BD_LENGTH(bd);
+ memcpy(*packetp, (char *)data, len);
+ } else {
+ printf("%s: Rx error\n", dev->name);
+ }
+ status &= BD_CLEAN;
+ BD_LENGTH_SET(bd, 0);
+ BD_STATUS_SET(bd, status | RxBD_EMPTY);
+ BD_ADVANCE(bd, status, uec->p_rx_bd_ring);
+ status = bd->status;
+ }
+ uec->rxBd = bd;
+
+ return len;
+}
+
+static int uec_graceful_stop_tx(uec_private_t *uec)
+{
+ ucc_fast_t *uf_regs;
+ u32 cecr_subblock;
+ u32 ucce;
+
+ uf_regs = uec->uccf->uf_regs;
+
+ /* Clear the grace stop event */
+ out_be32(&uf_regs->ucce, UCCE_GRA);
+
+ /* Issue host command */
+ cecr_subblock =
+ ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
+ qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
+ (u8)QE_CR_PROTOCOL_ETHERNET, 0);
+
+ /* Wait for command to complete */
+ do {
+ ucce = in_be32(&uf_regs->ucce);
+ } while (! (ucce & UCCE_GRA));
+
+ uec->grace_stopped_tx = 1;
+
+ return 0;
+}
+
+static int uec_graceful_stop_rx(uec_private_t *uec)
+{
+ u32 cecr_subblock;
+ u8 ack;
+
+ if (!uec->p_rx_glbl_pram) {
+ printf("%s: No init rx global parameter\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Clear acknowledge bit */
+ ack = uec->p_rx_glbl_pram->rxgstpack;
+ ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX;
+ uec->p_rx_glbl_pram->rxgstpack = ack;
+
+ /* Keep issuing cmd and checking ack bit until it is asserted */
+ do {
+ /* Issue host command */
+ cecr_subblock =
+ ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
+ qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock,
+ (u8)QE_CR_PROTOCOL_ETHERNET, 0);
+ ack = uec->p_rx_glbl_pram->rxgstpack;
+ } while (! (ack & GRACEFUL_STOP_ACKNOWLEDGE_RX ));
+
+ uec->grace_stopped_rx = 1;
+
+ return 0;
+}
+
+
+static int uec_stop(uec_private_t *uec, comm_dir_e mode)
+{
+ /* check if the UCC number is in range. */
+ if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
+ printf("%s: ucc_num out of range.\n", __func__);
+ return -EINVAL;
+ }
+ /* Stop any transmissions */
+ if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx)
+ uec_graceful_stop_tx(uec);
+
+ /* Stop any receptions */
+ if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx)
+ uec_graceful_stop_rx(uec);
+
+ /* Disable the UCC fast */
+ ucc_fast_disable(uec->uccf, mode);
+
+ /* Disable the MAC */
+ uec_mac_disable(uec, mode);
+
+ return 0;
+}
+
+static void qe_uec_stop(struct udevice *dev)
+{
+ struct qe_uec_priv *priv = dev_get_priv(dev);
+ uec_private_t *uec = priv->uec;
+
+ uec_stop(uec, COMM_DIR_RX_AND_TX);
+ return;
+}
+
+static int qe_uec_set_hwaddr(struct udevice *dev)
+{
+ struct qe_uec_priv *priv = dev_get_priv(dev);
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct uec_private *uec = priv->uec;
+ uec_t *uec_regs = uec->uec_regs;
+ uchar *mac = pdata->enetaddr;
+ u32 mac_addr1;
+ u32 mac_addr2;
+
+ /*
+ * if a station address of 0x12345678ABCD, perform a write to
+ * MACSTNADDR1 of 0xCDAB7856,
+ * MACSTNADDR2 of 0x34120000
+ */
+
+ mac_addr1 = (mac[5] << 24) | (mac[4] << 16) | \
+ (mac[3] << 8) | (mac[2]);
+ out_be32(&uec_regs->macstnaddr1, mac_addr1);
+
+ mac_addr2 = ((mac[1] << 24) | (mac[0] << 16)) & 0xffff0000;
+ out_be32(&uec_regs->macstnaddr2, mac_addr2);
+
+ return 0;
+}
+static int qe_uec_free_pkt(struct udevice *dev, uchar *packet, int length)
+{
+ if (packet)
+ free(packet);
+
+ return 0;
+}
+
+static const struct eth_ops qe_uec_eth_ops = {
+ .start = qe_uec_start,
+ .send = qe_uec_send,
+ .recv = qe_uec_recv,
+ .free_pkt = qe_uec_free_pkt,
+ .stop = qe_uec_stop,
+ .write_hwaddr = qe_uec_set_hwaddr,
+};
+
+static int uec_convert_threads_num(uec_num_of_threads_e threads_num,
+ int *threads_num_ret)
+{
+ int num_threads_numerica;
+
+ switch (threads_num) {
+ case UEC_NUM_OF_THREADS_1:
+ num_threads_numerica = 1;
+ break;
+ case UEC_NUM_OF_THREADS_2:
+ num_threads_numerica = 2;
+ break;
+ case UEC_NUM_OF_THREADS_4:
+ num_threads_numerica = 4;
+ break;
+ case UEC_NUM_OF_THREADS_6:
+ num_threads_numerica = 6;
+ break;
+ case UEC_NUM_OF_THREADS_8:
+ num_threads_numerica = 8;
+ break;
+ default:
+ printf("%s: Bad number of threads value.",
+ __FUNCTION__);
+ return -EINVAL;
+ }
+
+ *threads_num_ret = num_threads_numerica;
+
+ return 0;
+}
+
+static void uec_init_tx_parameter(uec_private_t *uec, int num_threads_tx)
+{
+ uec_info_t *uec_info;
+ u32 end_bd;
+ u8 bmrx = 0;
+ int i;
+
+ uec_info = uec->uec_info;
+
+ /* Alloc global Tx parameter RAM page */
+ uec->tx_glbl_pram_offset = qe_muram_alloc(
+ sizeof(uec_tx_global_pram_t),
+ UEC_TX_GLOBAL_PRAM_ALIGNMENT);
+ uec->p_tx_glbl_pram = (uec_tx_global_pram_t *)
+ qe_muram_addr(uec->tx_glbl_pram_offset);
+
+ /* Zero the global Tx prameter RAM */
+ memset(uec->p_tx_glbl_pram, 0, sizeof(uec_tx_global_pram_t));
+
+ /* Init global Tx parameter RAM */
+
+ /* TEMODER, RMON statistics disable, one Tx queue */
+ out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE);
+
+ /* SQPTR */
+ uec->send_q_mem_reg_offset = qe_muram_alloc(
+ sizeof(uec_send_queue_qd_t),
+ UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT);
+ uec->p_send_q_mem_reg = (uec_send_queue_mem_region_t *)
+ qe_muram_addr(uec->send_q_mem_reg_offset);
+ out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset);
+
+ /* Setup the table with TxBDs ring */
+ end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1)
+ * SIZEOFBD;
+ out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base,
+ (u32)(uec->p_tx_bd_ring));
+ out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address,
+ end_bd);
+
+ /* Scheduler Base Pointer, we have only one Tx queue, no need it */
+ out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0);
+
+ /* TxRMON Base Pointer, TxRMON disable, we don't need it */
+ out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0);
+
+ /* TSTATE, global snooping, big endian, the CSB bus selected */
+ bmrx = BMR_INIT_VALUE;
+ out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT));
+
+ /* IPH_Offset */
+ for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++)
+ out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0);
+
+ /* VTAG table */
+ for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++)
+ out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0);
+
+ /* TQPTR */
+ uec->thread_dat_tx_offset = qe_muram_alloc(
+ num_threads_tx * sizeof(uec_thread_data_tx_t) +
+ 32 *(num_threads_tx == 1), UEC_THREAD_DATA_ALIGNMENT);
+
+ uec->p_thread_data_tx = (uec_thread_data_tx_t *)
+ qe_muram_addr(uec->thread_dat_tx_offset);
+ out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset);
+}
+
+static void uec_init_rx_parameter(uec_private_t *uec, int num_threads_rx)
+{
+ u8 bmrx = 0;
+ int i;
+ uec_82xx_address_filtering_pram_t *p_af_pram;
+
+ /* Allocate global Rx parameter RAM page */
+ uec->rx_glbl_pram_offset = qe_muram_alloc(
+ sizeof(uec_rx_global_pram_t), UEC_RX_GLOBAL_PRAM_ALIGNMENT);
+ uec->p_rx_glbl_pram = (uec_rx_global_pram_t *)
+ qe_muram_addr(uec->rx_glbl_pram_offset);
+
+ /* Zero Global Rx parameter RAM */
+ memset(uec->p_rx_glbl_pram, 0, sizeof(uec_rx_global_pram_t));
+
+ /* Init global Rx parameter RAM */
+ /* REMODER, Extended feature mode disable, VLAN disable,
+ LossLess flow control disable, Receive firmware statisic disable,
+ Extended address parsing mode disable, One Rx queues,
+ Dynamic maximum/minimum frame length disable, IP checksum check
+ disable, IP address alignment disable
+ */
+ out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE);
+
+ /* RQPTR */
+ uec->thread_dat_rx_offset = qe_muram_alloc(
+ num_threads_rx * sizeof(uec_thread_data_rx_t),
+ UEC_THREAD_DATA_ALIGNMENT);
+ uec->p_thread_data_rx = (uec_thread_data_rx_t *)
+ qe_muram_addr(uec->thread_dat_rx_offset);
+ out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset);
+
+ /* Type_or_Len */
+ out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072);
+
+ /* RxRMON base pointer, we don't need it */
+ out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0);
+
+ /* IntCoalescingPTR, we don't need it, no interrupt */
+ out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0);
+
+ /* RSTATE, global snooping, big endian, the CSB bus selected */
+ bmrx = BMR_INIT_VALUE;
+ out_8(&uec->p_rx_glbl_pram->rstate, bmrx);
+
+ /* MRBLR */
+ out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN);
+
+ /* RBDQPTR */
+ uec->rx_bd_qs_tbl_offset = qe_muram_alloc(
+ sizeof(uec_rx_bd_queues_entry_t) + \
+ sizeof(uec_rx_prefetched_bds_t),
+ UEC_RX_BD_QUEUES_ALIGNMENT);
+ uec->p_rx_bd_qs_tbl = (uec_rx_bd_queues_entry_t *)
+ qe_muram_addr(uec->rx_bd_qs_tbl_offset);
+
+ /* Zero it */
+ memset(uec->p_rx_bd_qs_tbl, 0, sizeof(uec_rx_bd_queues_entry_t) + \
+ sizeof(uec_rx_prefetched_bds_t));
+ out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset);
+ out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr,
+ (u32)uec->p_rx_bd_ring);
+
+ /* MFLR */
+ out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN);
+ /* MINFLR */
+ out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN);
+ /* MAXD1 */
+ out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN);
+ /* MAXD2 */
+ out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN);
+ /* ECAM_PTR */
+ out_be32(&uec->p_rx_glbl_pram->ecamptr, 0);
+ /* L2QT */
+ out_be32(&uec->p_rx_glbl_pram->l2qt, 0);
+ /* L3QT */
+ for (i = 0; i < 8; i++)
+ out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0);
+
+ /* VLAN_TYPE */
+ out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100);
+ /* TCI */
+ out_be16(&uec->p_rx_glbl_pram->vlantci, 0);
+
+ /* Clear PQ2 style address filtering hash table */
+ p_af_pram = (uec_82xx_address_filtering_pram_t *) \
+ uec->p_rx_glbl_pram->addressfiltering;
+
+ p_af_pram->iaddr_h = 0;
+ p_af_pram->iaddr_l = 0;
+ p_af_pram->gaddr_h = 0;
+ p_af_pram->gaddr_l = 0;
+}
+
+static int uec_issue_init_enet_rxtx_cmd(uec_private_t *uec,
+ int thread_tx, int thread_rx)
+{
+ uec_init_cmd_pram_t *p_init_enet_param;
+ u32 init_enet_param_offset;
+ uec_info_t *uec_info;
+ int i;
+ int snum;
+ u32 init_enet_offset;
+ u32 entry_val;
+ u32 command;
+ u32 cecr_subblock;
+
+ uec_info = uec->uec_info;
+
+ /* Allocate init enet command parameter */
+ uec->init_enet_param_offset = qe_muram_alloc(
+ sizeof(uec_init_cmd_pram_t), 4);
+ init_enet_param_offset = uec->init_enet_param_offset;
+ uec->p_init_enet_param = (uec_init_cmd_pram_t *)
+ qe_muram_addr(uec->init_enet_param_offset);
+
+ /* Zero init enet command struct */
+ memset((void *)uec->p_init_enet_param, 0, sizeof(uec_init_cmd_pram_t));
+
+ /* Init the command struct */
+ p_init_enet_param = uec->p_init_enet_param;
+ p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0;
+ p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1;
+ p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2;
+ p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3;
+ p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4;
+ p_init_enet_param->largestexternallookupkeysize = 0;
+
+ p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx)
+ << ENET_INIT_PARAM_RGF_SHIFT;
+ p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx)
+ << ENET_INIT_PARAM_TGF_SHIFT;
+
+ /* Init Rx global parameter pointer */
+ p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset |
+ (u32)uec_info->risc_rx;
+
+ /* Init Rx threads */
+ for (i = 0; i < (thread_rx + 1); i++) {
+ if ((snum = qe_get_snum()) < 0) {
+ printf("%s can not get snum\n", __func__);
+ return -ENOMEM;
+ }
+
+ if (i==0) {
+ init_enet_offset = 0;
+ } else {
+ init_enet_offset = qe_muram_alloc(
+ sizeof(uec_thread_rx_pram_t),
+ UEC_THREAD_RX_PRAM_ALIGNMENT);
+ }
+
+ entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
+ init_enet_offset | (u32)uec_info->risc_rx;
+ p_init_enet_param->rxthread[i] = entry_val;
+ }
+
+ /* Init Tx global parameter pointer */
+ p_init_enet_param->txglobal = uec->tx_glbl_pram_offset |
+ (u32)uec_info->risc_tx;
+
+ /* Init Tx threads */
+ for (i = 0; i < thread_tx; i++) {
+ if ((snum = qe_get_snum()) < 0) {
+ printf("%s can not get snum\n", __func__);
+ return -ENOMEM;
+ }
+
+ init_enet_offset = qe_muram_alloc(sizeof(uec_thread_tx_pram_t),
+ UEC_THREAD_TX_PRAM_ALIGNMENT);
+
+ entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
+ init_enet_offset | (u32)uec_info->risc_tx;
+ p_init_enet_param->txthread[i] = entry_val;
+ }
+
+ __asm__ __volatile__("sync");
+
+ /* Issue QE command */
+ command = QE_INIT_TX_RX;
+ cecr_subblock = ucc_fast_get_qe_cr_subblock(
+ uec_info->uf_info.ucc_num);
+ qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET,
+ init_enet_param_offset);
+
+ return 0;
+}
+
+static int uec_startup(struct udevice *dev)
+{
+ struct qe_uec_priv *priv = dev_get_priv(dev);
+ uec_private_t *uec = priv->uec;
+ uec_info_t *uec_info;
+ ucc_fast_info_t *uf_info;
+ ucc_fast_private_t *uccf;
+ ucc_fast_t *uf_regs;
+ uec_t *uec_regs;
+ int num_threads_tx;
+ int num_threads_rx;
+ u32 utbipar;
+ u32 length;
+ u32 align;
+ qe_bd_t *bd;
+ u8 *buf;
+ int i;
+
+ uec_info = uec->uec_info;
+ uf_info = &(uec_info->uf_info);
+
+ /* Check if Rx BD ring len is illegal */
+ if ((uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN) || \
+ (uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT)) {
+ printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Check if Tx BD ring len is illegal */
+ if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) {
+ printf("%s: Tx BD ring length must not be smaller than 2.\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Check if MRBLR is illegal */
+ if ((MAX_RXBUF_LEN == 0) || (MAX_RXBUF_LEN % UEC_MRBLR_ALIGNMENT)) {
+ printf("%s: max rx buffer length must be mutliple of 128.\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Both Rx and Tx are stopped */
+ uec->grace_stopped_rx = 1;
+ uec->grace_stopped_tx = 1;
+
+ /* Init UCC fast */
+ if (ucc_fast_init(uf_info, &uccf)) {
+ printf("%s: failed to init ucc fast\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* Save uccf */
+ uec->uccf = uccf;
+
+ /* Convert the Tx threads number */
+ if (uec_convert_threads_num(uec_info->num_threads_tx,
+ &num_threads_tx))
+ return -EINVAL;
+
+ /* Convert the Rx threads number */
+ if (uec_convert_threads_num(uec_info->num_threads_rx,
+ &num_threads_rx))
+ return -EINVAL;
+
+ uf_regs = uccf->uf_regs;
+
+ /* UEC register is following UCC fast registers */
+ uec_regs = (uec_t *)(&uf_regs->ucc_eth);
+
+ /* Save the UEC register pointer to UEC private struct */
+ uec->uec_regs = uec_regs;
+
+ /* Init UPSMR, enable hardware statistics (UCC) */
+ out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE);
+
+ /* Init MACCFG1, flow control disable, disable Tx and Rx */
+ out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE);
+
+ /* Init MACCFG2, length check, MAC PAD and CRC enable */
+ out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE);
+
+ /* Setup UTBIPAR */
+ utbipar = in_be32(&uec_regs->utbipar);
+ utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK;
+
+ /* Initialize UTBIPAR address to CONFIG_UTBIPAR_INIT_TBIPA for ALL UEC.
+ * This frees up the remaining SMI addresses for use.
+ */
+ utbipar |= CONFIG_UTBIPAR_INIT_TBIPA << UTBIPAR_PHY_ADDRESS_SHIFT;
+ out_be32(&uec_regs->utbipar, utbipar);
+
+ /* Allocate Tx BDs */
+ length = ((uec_info->tx_bd_ring_len * SIZEOFBD) /
+ UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) *
+ UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
+ if ((uec_info->tx_bd_ring_len * SIZEOFBD) %
+ UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT)
+ length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
+
+ align = UEC_TX_BD_RING_ALIGNMENT;
+ uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align));
+ if (uec->tx_bd_ring_offset != 0)
+ uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align)
+ & ~(align - 1));
+
+ /* Zero all of Tx BDs */
+ memset((void *)(uec->tx_bd_ring_offset), 0, length + align);
+
+ /* Allocate Rx BDs */
+ length = uec_info->rx_bd_ring_len * SIZEOFBD;
+ align = UEC_RX_BD_RING_ALIGNMENT;
+ uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align)));
+ if (uec->rx_bd_ring_offset != 0)
+ uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align)
+ & ~(align - 1));
+
+ /* Zero all of Rx BDs */
+ memset((void *)(uec->rx_bd_ring_offset), 0, length + align);
+
+ /* Allocate Rx buffer */
+ length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN;
+ align = UEC_RX_DATA_BUF_ALIGNMENT;
+ uec->rx_buf_offset = (u32)malloc(length + align);
+ if (uec->rx_buf_offset != 0)
+ uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align)
+ & ~(align - 1));
+
+ /* Zero all of the Rx buffer */
+ memset((void *)(uec->rx_buf_offset), 0, length + align);
+
+ /* Init TxBD ring */
+ bd = (qe_bd_t *)uec->p_tx_bd_ring;
+ uec->txBd = bd;
+
+ for (i = 0; i < uec_info->tx_bd_ring_len; i++) {
+ BD_DATA_CLEAR(bd);
+ BD_STATUS_SET(bd, 0);
+ BD_LENGTH_SET(bd, 0);
+ bd ++;
+ }
+ BD_STATUS_SET((--bd), TxBD_WRAP);
+
+ /* Init RxBD ring */
+ bd = (qe_bd_t *)uec->p_rx_bd_ring;
+ uec->rxBd = bd;
+ buf = uec->p_rx_buf;
+ for (i = 0; i < uec_info->rx_bd_ring_len; i++) {
+ BD_DATA_SET(bd, buf);
+ BD_LENGTH_SET(bd, 0);
+ BD_STATUS_SET(bd, RxBD_EMPTY);
+ buf += MAX_RXBUF_LEN;
+ bd ++;
+ }
+ BD_STATUS_SET((--bd), RxBD_WRAP | RxBD_EMPTY);
+
+ /* Init global Tx parameter RAM */
+ uec_init_tx_parameter(uec, num_threads_tx);
+
+ /* Init global Rx parameter RAM */
+ uec_init_rx_parameter(uec, num_threads_rx);
+
+ /* Init ethernet Tx and Rx parameter command */
+ if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx,
+ num_threads_rx)) {
+ printf("%s issue init enet cmd failed\n", __func__);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/* Convert a string to a QE clock source enum
+ *
+ * This function takes a string, typically from a property in the device
+ * tree, and returns the corresponding "enum qe_clock" value.
+*/
+enum qe_clock qe_clock_source(const char *source)
+{
+ unsigned int i;
+
+ if (strcasecmp(source, "none") == 0)
+ return QE_CLK_NONE;
+
+ if (strncasecmp(source, "brg", 3) == 0) {
+ i = simple_strtoul(source + 3, NULL, 10);
+ if ((i >= 1) && (i <= 16))
+ return (QE_BRG1 - 1) + i;
+ else
+ return QE_CLK_DUMMY;
+ }
+
+ if (strncasecmp(source, "clk", 3) == 0) {
+ i = simple_strtoul(source + 3, NULL, 10);
+ if ((i >= 1) && (i <= 24))
+ return (QE_CLK1 - 1) + i;
+ else
+ return QE_CLK_DUMMY;
+ }
+
+ return QE_CLK_DUMMY;
+}
+
+static void qe_uec_set_eth_type(struct udevice *dev)
+{
+ struct qe_uec_priv *priv = dev_get_priv(dev);
+ uec_private_t *uec = priv->uec;
+ uec_info_t *uec_info = uec->uec_info;
+ ucc_fast_info_t *uf_info = &uec_info->uf_info;
+
+ switch (uec_info->enet_interface_type) {
+ case PHY_INTERFACE_MODE_GMII:
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_TBI:
+ case PHY_INTERFACE_MODE_RTBI:
+ case PHY_INTERFACE_MODE_SGMII:
+ uf_info->eth_type = GIGA_ETH;
+ break;
+ default:
+ uf_info->eth_type = FAST_ETH;
+ break;
+ }
+ return;
+}
+
+static int qe_uec_set_uec_info(struct udevice *dev)
+{
+ struct qe_uec_priv *priv = dev_get_priv(dev);
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ uec_private_t *uec = priv->uec;
+ uec_info_t *uec_info;
+ ucc_fast_info_t *uf_info;
+ const char *s;
+ int ret;
+ u32 val;
+
+ uec_info = (uec_info_t *)malloc(sizeof(uec_info_t));
+ if (!uec_info)
+ return -ENOMEM;
+
+ uf_info = &uec_info->uf_info;
+
+ ret = dev_read_u32(dev, "cell-index", &val);
+ if (ret) {
+ ret = dev_read_u32(dev, "device-id", &val);
+ if (ret) {
+ pr_err("no cell-index nor device-id found!");
+ goto out;
+ }
+ }
+
+ uf_info->ucc_num = val - 1;
+ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > 7)) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = dev_read_string_index(dev, "rx-clock-name", 0, &s);
+ if (!ret) {
+ uf_info->rx_clock = qe_clock_source(s);
+ if ((uf_info->rx_clock < QE_CLK_NONE) ||
+ (uf_info->rx_clock > QE_CLK24)) {
+ pr_err("invalid rx-clock-name property\n");
+ ret = -EINVAL;
+ goto out;
+ }
+ } else {
+ ret = dev_read_u32(dev, "rx-clock", &val);
+ if (ret) {
+ /* If both rx-clock-name and rx-clock are missing,
+ we want to tell people to use rx-clock-name. */
+ pr_err("missing rx-clock-name property\n");
+ goto out;
+ }
+ if ((val < QE_CLK_NONE) || (val > QE_CLK24)) {
+ pr_err("invalid rx-clock property\n");
+ ret = -EINVAL;
+ goto out;
+ }
+ uf_info->rx_clock = val;
+ }
+
+ ret = dev_read_string_index(dev, "tx-clock-name", 0, &s);
+ if (!ret) {
+ uf_info->tx_clock = qe_clock_source(s);
+ if ((uf_info->tx_clock < QE_CLK_NONE) ||
+ (uf_info->tx_clock > QE_CLK24)) {
+ pr_err("invalid tx-clock-name property\n");
+ ret = -EINVAL;
+ goto out;
+ }
+ } else {
+ ret = dev_read_u32(dev, "tx-clock", &val);
+ if (ret) {
+ pr_err("missing tx-clock-name property\n");
+ goto out;
+ }
+ if ((val < QE_CLK_NONE) || (val > QE_CLK24)) {
+ pr_err("invalid tx-clock property\n");
+ ret = -EINVAL;
+ goto out;
+ }
+ uf_info->tx_clock = val;
+ }
+
+ uec_info->num_threads_tx = UEC_NUM_OF_THREADS_1;
+ uec_info->num_threads_rx = UEC_NUM_OF_THREADS_1;
+ uec_info->risc_tx = QE_RISC_ALLOCATION_RISC1_AND_RISC2;
+ uec_info->risc_rx = QE_RISC_ALLOCATION_RISC1_AND_RISC2;
+ uec_info->tx_bd_ring_len = 16;
+ uec_info->rx_bd_ring_len = 16;
+#if (MAX_QE_RISC == 4)
+ uec_info->risc_tx = QE_RISC_ALLOCATION_FOUR_RISCS;
+ uec_info->risc_rx = QE_RISC_ALLOCATION_FOUR_RISCS;
+#endif
+
+ uec_info->enet_interface_type = pdata->phy_interface;
+
+ uec->uec_info = uec_info;
+ qe_uec_set_eth_type(dev);
+
+ return 0;
+out:
+ free(uec_info);
+ return ret;
+}
+
+static int qe_uec_probe(struct udevice *dev)
+{
+ struct qe_uec_priv *priv = dev_get_priv(dev);
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ uec_private_t *uec;
+ int ret;
+
+ /* Allocate the UEC private struct */
+ uec = (uec_private_t *)malloc(sizeof(uec_private_t));
+ if (!uec)
+ return -ENOMEM;
+
+ memset(uec, 0, sizeof(uec_private_t));
+ priv->uec = uec;
+ uec->uec_regs = (uec_t *)pdata->iobase;
+
+ /* setup uec info struct */
+ ret = qe_uec_set_uec_info(dev);
+ if (ret) {
+ free(uec);
+ return ret;
+ }
+
+ ret = uec_startup(dev);
+ if (ret) {
+ free(uec->uec_info);
+ free(uec);
+ return ret;
+ }
+
+ priv->phydev = dm_eth_phy_connect(dev);
+ return 0;
+}
+
+/*
+ * Remove the driver from an interface:
+ * - free up allocated memory
+ */
+static int qe_uec_remove(struct udevice *dev)
+{
+ struct qe_uec_priv *priv = dev_get_priv(dev);
+
+ free(priv->uec);
+ return 0;
+}
+
+static int qe_uec_ofdata_to_platdata(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ const char *phy_mode;
+
+ pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
+
+ pdata->phy_interface = -1;
+ phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev),
+ "phy-connection-type", NULL);
+ if (phy_mode)
+ pdata->phy_interface = phy_get_interface_by_name(phy_mode);
+ if (pdata->phy_interface == -1) {
+ debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static const struct udevice_id qe_uec_ids[] = {
+ { .compatible = QE_UEC_DRIVER_NAME },
+ { }
+};
+
+U_BOOT_DRIVER(eth_qe_uec) = {
+ .name = QE_UEC_DRIVER_NAME,
+ .id = UCLASS_ETH,
+ .of_match = qe_uec_ids,
+ .ofdata_to_platdata = qe_uec_ofdata_to_platdata,
+ .probe = qe_uec_probe,
+ .remove = qe_uec_remove,
+ .ops = &qe_uec_eth_ops,
+ .priv_auto_alloc_size = sizeof(struct qe_uec_priv),
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};
diff --git a/drivers/net/qe/dm_qe_uec.h b/drivers/net/qe/dm_qe_uec.h
new file mode 100644
index 0000000000..12bb9b3d49
--- /dev/null
+++ b/drivers/net/qe/dm_qe_uec.h
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * QE UEC ethernet controller driver
+ *
+ * based on drivers/qe/uec.c from NXP
+ *
+ * Copyright (C) 2020 Heiko Schocher <hs at denx.de>
+ */
+
+#ifndef _DM_QE_UEC_H
+#define _DM_QE_UEC_H
+
+#define qe_uec_dbg(dev, fmt, args...) debug("%s:" fmt, dev->name, ##args)
+
+#include "uec.h"
+
+/* QE UEC private structure */
+struct qe_uec_priv {
+ struct uec_private *uec;
+ struct phy_device *phydev;
+};
+#endif
diff --git a/drivers/net/qe/dm_qe_uec_phy.c b/drivers/net/qe/dm_qe_uec_phy.c
new file mode 100644
index 0000000000..4b5fdc0a06
--- /dev/null
+++ b/drivers/net/qe/dm_qe_uec_phy.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * QE UEC ethernet phy controller driver
+ *
+ * based on phy parts of drivers/qe/uec.c and drivers/qe/uec_phy.c
+ * from NXP
+ *
+ * Copyright (C) 2020 Heiko Schocher <hs at denx.de>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/io.h>
+#include <linux/ioport.h>
+
+#include "dm_qe_uec.h"
+
+struct qe_uec_mdio_priv {
+ struct ucc_mii_mng *base;
+};
+
+static int
+qe_uec_mdio_read(struct udevice *dev, int addr, int devad, int reg)
+{
+ struct qe_uec_mdio_priv *priv = dev_get_priv(dev);
+ struct ucc_mii_mng *regs = priv->base;
+ u32 tmp_reg;
+ u16 value;
+
+ debug("%s: regs: %p addr: %x devad: %x reg: %x\n", __func__, regs,
+ addr, devad, reg);
+ /* Setting up the MII Mangement Address Register */
+ tmp_reg = ((u32) addr << MIIMADD_PHY_ADDRESS_SHIFT) | reg;
+ out_be32(®s->miimadd, tmp_reg);
+
+ /* clear MII management command cycle */
+ out_be32(®s->miimcom, 0);
+ sync();
+
+ /* Perform an MII management read cycle */
+ out_be32(®s->miimcom, MIIMCOM_READ_CYCLE);
+
+ /* Wait till MII management write is complete */
+ while ((in_be32(®s->miimind)) &
+ (MIIMIND_NOT_VALID | MIIMIND_BUSY));
+
+ /* Read MII management status */
+ value = (u16) in_be32(®s->miimstat);
+ if (value == 0xffff)
+ return -EINVAL;
+
+ return value;
+};
+
+static int
+qe_uec_mdio_write(struct udevice *dev, int addr, int devad, int reg,
+ u16 value)
+{
+ struct qe_uec_mdio_priv *priv = dev_get_priv(dev);
+ struct ucc_mii_mng *regs = priv->base;
+ u32 tmp_reg;
+
+ debug("%s: regs: %p addr: %x devad: %x reg: %x val: %x\n", __func__,
+ regs, addr, devad, reg, value);
+
+ /* Stop the MII management read cycle */
+ out_be32(®s->miimcom, 0);
+ /* Setting up the MII Mangement Address Register */
+ tmp_reg = ((u32) addr << MIIMADD_PHY_ADDRESS_SHIFT) | reg;
+ out_be32(®s->miimadd, tmp_reg);
+
+ /* Setting up the MII Mangement Control Register with the value */
+ out_be32(®s->miimcon, (u32) value);
+ sync();
+
+ /* Wait till MII management write is complete */
+ while ((in_be32(®s->miimind)) & MIIMIND_BUSY);
+
+ return 0;
+};
+
+static const struct mdio_ops qe_uec_mdio_ops = {
+ .read = qe_uec_mdio_read,
+ .write = qe_uec_mdio_write,
+};
+
+static int qe_uec_mdio_probe(struct udevice *dev)
+{
+ struct qe_uec_mdio_priv *priv = dev_get_priv(dev);
+ fdt_size_t base;
+ ofnode node;
+ u32 num = 0;
+ int ret = -ENODEV;
+
+ priv->base = (struct ucc_mii_mng *)dev_read_addr(dev);
+ base = (fdt_size_t)priv->base;
+
+ /*
+ * idea from linux:
+ * drivers/net/ethernet/freescale/fsl_pq_mdio.c
+ *
+ * Find the UCC node that controls the given MDIO node
+ *
+ * For some reason, the QE MDIO nodes are not children of the UCC
+ * devices that control them. Therefore, we need to scan all UCC
+ * nodes looking for the one that encompases the given MDIO node.
+ * We do this by comparing physical addresses. The 'start' and
+ * 'end' addresses of the MDIO node are passed, and the correct
+ * UCC node will cover the entire address range.
+ */
+ node = ofnode_by_compatible(ofnode_null(), "ucc_geth");
+ while (ofnode_valid(node)) {
+ fdt_size_t size;
+ fdt_addr_t addr;
+
+ addr = ofnode_get_addr_index(node, 0);
+ ret = ofnode_get_addr_size_index(node, 0, &size);
+
+ if (addr == FDT_ADDR_T_NONE) {
+ node = ofnode_by_compatible(node, "ucc_geth");
+ continue;
+ }
+
+ /* check if priv->base in start end */
+ if (base > addr && base < (addr + size)) {
+ ret = ofnode_read_u32(node, "cell-index", &num);
+ if (ret)
+ ret = ofnode_read_u32(node, "device-id",
+ &num);
+ break;
+ }
+ node = ofnode_by_compatible(node, "ucc_geth");
+ }
+
+ if (ret) {
+ printf("%s: no cell-index nor device-id found!", __func__);
+ return ret;
+ }
+
+ /* Setup MII master clock source */
+ qe_set_mii_clk_src(num - 1);
+
+ return 0;
+}
+
+static const struct udevice_id qe_uec_mdio_ids[] = {
+ { .compatible = "fsl,ucc-mdio" },
+ { }
+};
+
+U_BOOT_DRIVER(mvmdio) = {
+ .name = "qe_uec_mdio",
+ .id = UCLASS_MDIO,
+ .of_match = qe_uec_mdio_ids,
+ .probe = qe_uec_mdio_probe,
+ .ops = &qe_uec_mdio_ops,
+ .priv_auto_alloc_size = sizeof(struct qe_uec_mdio_priv),
+};
diff --git a/drivers/net/qe/uccf.c b/drivers/net/qe/uccf.c
new file mode 100644
index 0000000000..9beb5d90ac
--- /dev/null
+++ b/drivers/net/qe/uccf.c
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu at freescale.com>
+ * based on source code of Shlomi Gridish
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <linux/immap_qe.h>
+#include "uccf.h"
+#include <fsl_qe.h>
+
+void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf)
+{
+ out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
+}
+
+u32 ucc_fast_get_qe_cr_subblock(int ucc_num)
+{
+ switch (ucc_num) {
+ case 0: return QE_CR_SUBBLOCK_UCCFAST1;
+ case 1: return QE_CR_SUBBLOCK_UCCFAST2;
+ case 2: return QE_CR_SUBBLOCK_UCCFAST3;
+ case 3: return QE_CR_SUBBLOCK_UCCFAST4;
+ case 4: return QE_CR_SUBBLOCK_UCCFAST5;
+ case 5: return QE_CR_SUBBLOCK_UCCFAST6;
+ case 6: return QE_CR_SUBBLOCK_UCCFAST7;
+ case 7: return QE_CR_SUBBLOCK_UCCFAST8;
+ default: return QE_CR_SUBBLOCK_INVALID;
+ }
+}
+
+static void ucc_get_cmxucr_reg(int ucc_num, volatile u32 **p_cmxucr,
+ u8 *reg_num, u8 *shift)
+{
+ switch (ucc_num) {
+ case 0: /* UCC1 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+ *reg_num = 1;
+ *shift = 16;
+ break;
+ case 2: /* UCC3 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr1);
+ *reg_num = 1;
+ *shift = 0;
+ break;
+ case 4: /* UCC5 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+ *reg_num = 2;
+ *shift = 16;
+ break;
+ case 6: /* UCC7 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr2);
+ *reg_num = 2;
+ *shift = 0;
+ break;
+ case 1: /* UCC2 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+ *reg_num = 3;
+ *shift = 16;
+ break;
+ case 3: /* UCC4 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr3);
+ *reg_num = 3;
+ *shift = 0;
+ break;
+ case 5: /* UCC6 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+ *reg_num = 4;
+ *shift = 16;
+ break;
+ case 7: /* UCC8 */
+ *p_cmxucr = &(qe_immr->qmx.cmxucr4);
+ *reg_num = 4;
+ *shift = 0;
+ break;
+ default:
+ break;
+ }
+}
+
+static int ucc_set_clk_src(int ucc_num, qe_clock_e clock, comm_dir_e mode)
+{
+ volatile u32 *p_cmxucr = NULL;
+ u8 reg_num = 0;
+ u8 shift = 0;
+ u32 clockBits;
+ u32 clockMask;
+ int source = -1;
+
+ /* check if the UCC number is in range. */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ return -EINVAL;
+
+ if (! ((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
+ printf("%s: bad comm mode type passed\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ ucc_get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift);
+
+ switch (reg_num) {
+ case 1:
+ switch (clock) {
+ case QE_BRG1: source = 1; break;
+ case QE_BRG2: source = 2; break;
+ case QE_BRG7: source = 3; break;
+ case QE_BRG8: source = 4; break;
+ case QE_CLK9: source = 5; break;
+ case QE_CLK10: source = 6; break;
+ case QE_CLK11: source = 7; break;
+ case QE_CLK12: source = 8; break;
+ case QE_CLK15: source = 9; break;
+ case QE_CLK16: source = 10; break;
+ default: source = -1; break;
+ }
+ break;
+ case 2:
+ switch (clock) {
+ case QE_BRG5: source = 1; break;
+ case QE_BRG6: source = 2; break;
+ case QE_BRG7: source = 3; break;
+ case QE_BRG8: source = 4; break;
+ case QE_CLK13: source = 5; break;
+ case QE_CLK14: source = 6; break;
+ case QE_CLK19: source = 7; break;
+ case QE_CLK20: source = 8; break;
+ case QE_CLK15: source = 9; break;
+ case QE_CLK16: source = 10; break;
+ default: source = -1; break;
+ }
+ break;
+ case 3:
+ switch (clock) {
+ case QE_BRG9: source = 1; break;
+ case QE_BRG10: source = 2; break;
+ case QE_BRG15: source = 3; break;
+ case QE_BRG16: source = 4; break;
+ case QE_CLK3: source = 5; break;
+ case QE_CLK4: source = 6; break;
+ case QE_CLK17: source = 7; break;
+ case QE_CLK18: source = 8; break;
+ case QE_CLK7: source = 9; break;
+ case QE_CLK8: source = 10; break;
+ case QE_CLK16: source = 11; break;
+ default: source = -1; break;
+ }
+ break;
+ case 4:
+ switch (clock) {
+ case QE_BRG13: source = 1; break;
+ case QE_BRG14: source = 2; break;
+ case QE_BRG15: source = 3; break;
+ case QE_BRG16: source = 4; break;
+ case QE_CLK5: source = 5; break;
+ case QE_CLK6: source = 6; break;
+ case QE_CLK21: source = 7; break;
+ case QE_CLK22: source = 8; break;
+ case QE_CLK7: source = 9; break;
+ case QE_CLK8: source = 10; break;
+ case QE_CLK16: source = 11; break;
+ default: source = -1; break;
+ }
+ break;
+ default:
+ source = -1;
+ break;
+ }
+
+ if (source == -1) {
+ printf("%s: Bad combination of clock and UCC\n", __FUNCTION__);
+ return -ENOENT;
+ }
+
+ clockBits = (u32) source;
+ clockMask = QE_CMXUCR_TX_CLK_SRC_MASK;
+ if (mode == COMM_DIR_RX) {
+ clockBits <<= 4; /* Rx field is 4 bits to left of Tx field */
+ clockMask <<= 4; /* Rx field is 4 bits to left of Tx field */
+ }
+ clockBits <<= shift;
+ clockMask <<= shift;
+
+ out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clockMask) | clockBits);
+
+ return 0;
+}
+
+static uint ucc_get_reg_baseaddr(int ucc_num)
+{
+ uint base = 0;
+
+ /* check if the UCC number is in range */
+ if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) {
+ printf("%s: the UCC num not in ranges\n", __FUNCTION__);
+ return 0;
+ }
+
+ switch (ucc_num) {
+ case 0: base = 0x00002000; break;
+ case 1: base = 0x00003000; break;
+ case 2: base = 0x00002200; break;
+ case 3: base = 0x00003200; break;
+ case 4: base = 0x00002400; break;
+ case 5: base = 0x00003400; break;
+ case 6: base = 0x00002600; break;
+ case 7: base = 0x00003600; break;
+ default: break;
+ }
+
+ base = (uint)qe_immr + base;
+ return base;
+}
+
+void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode)
+{
+ ucc_fast_t *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Enable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr |= UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 1;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr |= UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 1;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+
+void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode)
+{
+ ucc_fast_t *uf_regs;
+ u32 gumr;
+
+ uf_regs = uccf->uf_regs;
+
+ /* Disable reception and/or transmission on this UCC. */
+ gumr = in_be32(&uf_regs->gumr);
+ if (mode & COMM_DIR_TX) {
+ gumr &= ~UCC_FAST_GUMR_ENT;
+ uccf->enabled_tx = 0;
+ }
+ if (mode & COMM_DIR_RX) {
+ gumr &= ~UCC_FAST_GUMR_ENR;
+ uccf->enabled_rx = 0;
+ }
+ out_be32(&uf_regs->gumr, gumr);
+}
+
+int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret)
+{
+ ucc_fast_private_t *uccf;
+ ucc_fast_t *uf_regs;
+
+ if (!uf_info)
+ return -EINVAL;
+
+ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
+ printf("%s: Illagal UCC number!\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ uccf = (ucc_fast_private_t *)malloc(sizeof(ucc_fast_private_t));
+ if (!uccf) {
+ printf("%s: No memory for UCC fast data structure!\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+ memset(uccf, 0, sizeof(ucc_fast_private_t));
+
+ /* Save fast UCC structure */
+ uccf->uf_info = uf_info;
+ uccf->uf_regs = (ucc_fast_t *)ucc_get_reg_baseaddr(uf_info->ucc_num);
+
+ if (uccf->uf_regs == NULL) {
+ printf("%s: No memory map for UCC fast controller!\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ uccf->enabled_tx = 0;
+ uccf->enabled_rx = 0;
+
+ uf_regs = uccf->uf_regs;
+ uccf->p_ucce = (u32 *) &(uf_regs->ucce);
+ uccf->p_uccm = (u32 *) &(uf_regs->uccm);
+
+ /* Init GUEMR register, UCC both Rx and Tx is Fast protocol */
+ out_8(&uf_regs->guemr, UCC_GUEMR_SET_RESERVED3 | UCC_GUEMR_MODE_FAST_RX
+ | UCC_GUEMR_MODE_FAST_TX);
+
+ /* Set GUMR, disable UCC both Rx and Tx, Ethernet protocol */
+ out_be32(&uf_regs->gumr, UCC_FAST_GUMR_ETH);
+
+ /* Set the Giga ethernet VFIFO stuff */
+ if (uf_info->eth_type == GIGA_ETH) {
+ /* Allocate memory for Tx Virtual Fifo */
+ uccf->ucc_fast_tx_virtual_fifo_base_offset =
+ qe_muram_alloc(UCC_GETH_UTFS_GIGA_INIT,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+
+ /* Allocate memory for Rx Virtual Fifo */
+ uccf->ucc_fast_rx_virtual_fifo_base_offset =
+ qe_muram_alloc(UCC_GETH_URFS_GIGA_INIT +
+ UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+
+ /* utfb, urfb are offsets from MURAM base */
+ out_be32(&uf_regs->utfb,
+ uccf->ucc_fast_tx_virtual_fifo_base_offset);
+ out_be32(&uf_regs->urfb,
+ uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ /* Set Virtual Fifo registers */
+ out_be16(&uf_regs->urfs, UCC_GETH_URFS_GIGA_INIT);
+ out_be16(&uf_regs->urfet, UCC_GETH_URFET_GIGA_INIT);
+ out_be16(&uf_regs->urfset, UCC_GETH_URFSET_GIGA_INIT);
+ out_be16(&uf_regs->utfs, UCC_GETH_UTFS_GIGA_INIT);
+ out_be16(&uf_regs->utfet, UCC_GETH_UTFET_GIGA_INIT);
+ out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_GIGA_INIT);
+ }
+
+ /* Set the Fast ethernet VFIFO stuff */
+ if (uf_info->eth_type == FAST_ETH) {
+ /* Allocate memory for Tx Virtual Fifo */
+ uccf->ucc_fast_tx_virtual_fifo_base_offset =
+ qe_muram_alloc(UCC_GETH_UTFS_INIT,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+
+ /* Allocate memory for Rx Virtual Fifo */
+ uccf->ucc_fast_rx_virtual_fifo_base_offset =
+ qe_muram_alloc(UCC_GETH_URFS_INIT +
+ UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD,
+ UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+
+ /* utfb, urfb are offsets from MURAM base */
+ out_be32(&uf_regs->utfb,
+ uccf->ucc_fast_tx_virtual_fifo_base_offset);
+ out_be32(&uf_regs->urfb,
+ uccf->ucc_fast_rx_virtual_fifo_base_offset);
+
+ /* Set Virtual Fifo registers */
+ out_be16(&uf_regs->urfs, UCC_GETH_URFS_INIT);
+ out_be16(&uf_regs->urfet, UCC_GETH_URFET_INIT);
+ out_be16(&uf_regs->urfset, UCC_GETH_URFSET_INIT);
+ out_be16(&uf_regs->utfs, UCC_GETH_UTFS_INIT);
+ out_be16(&uf_regs->utfet, UCC_GETH_UTFET_INIT);
+ out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_INIT);
+ }
+
+ /* Rx clock routing */
+ if (uf_info->rx_clock != QE_CLK_NONE) {
+ if (ucc_set_clk_src(uf_info->ucc_num,
+ uf_info->rx_clock, COMM_DIR_RX)) {
+ printf("%s: Illegal value for parameter 'RxClock'.\n",
+ __FUNCTION__);
+ return -EINVAL;
+ }
+ }
+
+ /* Tx clock routing */
+ if (uf_info->tx_clock != QE_CLK_NONE) {
+ if (ucc_set_clk_src(uf_info->ucc_num,
+ uf_info->tx_clock, COMM_DIR_TX)) {
+ printf("%s: Illegal value for parameter 'TxClock'.\n",
+ __FUNCTION__);
+ return -EINVAL;
+ }
+ }
+
+ /* Clear interrupt mask register to disable all of interrupts */
+ out_be32(&uf_regs->uccm, 0x0);
+
+ /* Writing '1' to clear all of envents */
+ out_be32(&uf_regs->ucce, 0xffffffff);
+
+ *uccf_ret = uccf;
+ return 0;
+}
diff --git a/drivers/net/qe/uccf.h b/drivers/net/qe/uccf.h
new file mode 100644
index 0000000000..4098c66317
--- /dev/null
+++ b/drivers/net/qe/uccf.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu at freescale.com>
+ * based on source code of Shlomi Gridish
+ */
+
+#ifndef __UCCF_H__
+#define __UCCF_H__
+
+#include "common.h"
+#include "linux/immap_qe.h"
+#include <fsl_qe.h>
+
+/* Fast or Giga ethernet
+*/
+typedef enum enet_type {
+ FAST_ETH,
+ GIGA_ETH,
+} enet_type_e;
+
+/* General UCC Extended Mode Register
+*/
+#define UCC_GUEMR_MODE_MASK_RX 0x02
+#define UCC_GUEMR_MODE_MASK_TX 0x01
+#define UCC_GUEMR_MODE_FAST_RX 0x02
+#define UCC_GUEMR_MODE_FAST_TX 0x01
+#define UCC_GUEMR_MODE_SLOW_RX 0x00
+#define UCC_GUEMR_MODE_SLOW_TX 0x00
+#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 must be set 1 */
+
+/* General UCC FAST Mode Register
+*/
+#define UCC_FAST_GUMR_TCI 0x20000000
+#define UCC_FAST_GUMR_TRX 0x10000000
+#define UCC_FAST_GUMR_TTX 0x08000000
+#define UCC_FAST_GUMR_CDP 0x04000000
+#define UCC_FAST_GUMR_CTSP 0x02000000
+#define UCC_FAST_GUMR_CDS 0x01000000
+#define UCC_FAST_GUMR_CTSS 0x00800000
+#define UCC_FAST_GUMR_TXSY 0x00020000
+#define UCC_FAST_GUMR_RSYN 0x00010000
+#define UCC_FAST_GUMR_RTSM 0x00002000
+#define UCC_FAST_GUMR_REVD 0x00000400
+#define UCC_FAST_GUMR_ENR 0x00000020
+#define UCC_FAST_GUMR_ENT 0x00000010
+
+/* GUMR [MODE] bit maps
+*/
+#define UCC_FAST_GUMR_HDLC 0x00000000
+#define UCC_FAST_GUMR_QMC 0x00000002
+#define UCC_FAST_GUMR_UART 0x00000004
+#define UCC_FAST_GUMR_BISYNC 0x00000008
+#define UCC_FAST_GUMR_ATM 0x0000000a
+#define UCC_FAST_GUMR_ETH 0x0000000c
+
+/* Transmit On Demand (UTORD)
+*/
+#define UCC_SLOW_TOD 0x8000
+#define UCC_FAST_TOD 0x8000
+
+/* Fast Ethernet (10/100 Mbps)
+*/
+#define UCC_GETH_URFS_INIT 512 /* Rx virtual FIFO size */
+#define UCC_GETH_URFET_INIT 256 /* 1/2 urfs */
+#define UCC_GETH_URFSET_INIT 384 /* 3/4 urfs */
+#define UCC_GETH_UTFS_INIT 512 /* Tx virtual FIFO size */
+#define UCC_GETH_UTFET_INIT 256 /* 1/2 utfs */
+#define UCC_GETH_UTFTT_INIT 128
+
+/* Gigabit Ethernet (1000 Mbps)
+*/
+#define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/ /* Rx virtual FIFO size */
+#define UCC_GETH_URFET_GIGA_INIT 2048/*1024*/ /* 1/2 urfs */
+#define UCC_GETH_URFSET_GIGA_INIT 3072/*1536*/ /* 3/4 urfs */
+#define UCC_GETH_UTFS_GIGA_INIT 8192/*2048*/ /* Tx virtual FIFO size */
+#define UCC_GETH_UTFET_GIGA_INIT 4096/*1024*/ /* 1/2 utfs */
+#define UCC_GETH_UTFTT_GIGA_INIT 0x400/*0x40*/ /* */
+
+/* UCC fast alignment
+*/
+#define UCC_FAST_RX_ALIGN 4
+#define UCC_FAST_MRBLR_ALIGNMENT 4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
+
+/* Sizes
+*/
+#define UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD 8
+
+/* UCC fast structure.
+*/
+typedef struct ucc_fast_info {
+ int ucc_num;
+ qe_clock_e rx_clock;
+ qe_clock_e tx_clock;
+ enet_type_e eth_type;
+} ucc_fast_info_t;
+
+typedef struct ucc_fast_private {
+ ucc_fast_info_t *uf_info;
+ ucc_fast_t *uf_regs; /* a pointer to memory map of UCC regs */
+ u32 *p_ucce; /* a pointer to the event register */
+ u32 *p_uccm; /* a pointer to the mask register */
+ int enabled_tx; /* whether UCC is enabled for Tx (ENT) */
+ int enabled_rx; /* whether UCC is enabled for Rx (ENR) */
+ u32 ucc_fast_tx_virtual_fifo_base_offset;
+ u32 ucc_fast_rx_virtual_fifo_base_offset;
+} ucc_fast_private_t;
+
+void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf);
+u32 ucc_fast_get_qe_cr_subblock(int ucc_num);
+void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode);
+void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode);
+int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret);
+
+#endif /* __UCCF_H__ */
diff --git a/drivers/net/qe/uec.h b/drivers/net/qe/uec.h
new file mode 100644
index 0000000000..ada3ac5fd7
--- /dev/null
+++ b/drivers/net/qe/uec.h
@@ -0,0 +1,742 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2006-2010 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu at freescale.com>
+ * based on source code of Shlomi Gridish
+ */
+
+#ifndef __UEC_H__
+#define __UEC_H__
+
+#include "uccf.h"
+#include <fsl_qe.h>
+#include <phy.h>
+
+#define MAX_TX_THREADS 8
+#define MAX_RX_THREADS 8
+#define MAX_TX_QUEUES 8
+#define MAX_RX_QUEUES 8
+#define MAX_PREFETCHED_BDS 4
+#define MAX_IPH_OFFSET_ENTRY 8
+#define MAX_ENET_INIT_PARAM_ENTRIES_RX 9
+#define MAX_ENET_INIT_PARAM_ENTRIES_TX 8
+
+/* UEC UPSMR (Protocol Specific Mode Register)
+ */
+#define UPSMR_ECM 0x04000000 /* Enable CAM Miss */
+#define UPSMR_HSE 0x02000000 /* Hardware Statistics Enable */
+#define UPSMR_PRO 0x00400000 /* Promiscuous */
+#define UPSMR_CAP 0x00200000 /* CAM polarity */
+#define UPSMR_RSH 0x00100000 /* Receive Short Frames */
+#define UPSMR_RPM 0x00080000 /* Reduced Pin Mode interfaces */
+#define UPSMR_R10M 0x00040000 /* RGMII/RMII 10 Mode */
+#define UPSMR_RLPB 0x00020000 /* RMII Loopback Mode */
+#define UPSMR_TBIM 0x00010000 /* Ten-bit Interface Mode */
+#define UPSMR_RMM 0x00001000 /* RMII/RGMII Mode */
+#define UPSMR_CAM 0x00000400 /* CAM Address Matching */
+#define UPSMR_BRO 0x00000200 /* Broadcast Address */
+#define UPSMR_RES1 0x00002000 /* Reserved feild - must be 1 */
+#define UPSMR_SGMM 0x00000020 /* SGMII mode */
+
+#define UPSMR_INIT_VALUE (UPSMR_HSE | UPSMR_RES1)
+
+/* UEC MACCFG1 (MAC Configuration 1 Register)
+ */
+#define MACCFG1_FLOW_RX 0x00000020 /* Flow Control Rx */
+#define MACCFG1_FLOW_TX 0x00000010 /* Flow Control Tx */
+#define MACCFG1_ENABLE_SYNCHED_RX 0x00000008 /* Enable Rx Sync */
+#define MACCFG1_ENABLE_RX 0x00000004 /* Enable Rx */
+#define MACCFG1_ENABLE_SYNCHED_TX 0x00000002 /* Enable Tx Sync */
+#define MACCFG1_ENABLE_TX 0x00000001 /* Enable Tx */
+
+#define MACCFG1_INIT_VALUE (0)
+
+/* UEC MACCFG2 (MAC Configuration 2 Register)
+ */
+#define MACCFG2_PREL 0x00007000
+#define MACCFG2_PREL_SHIFT (31 - 19)
+#define MACCFG2_PREL_MASK 0x0000f000
+#define MACCFG2_SRP 0x00000080
+#define MACCFG2_STP 0x00000040
+#define MACCFG2_RESERVED_1 0x00000020 /* must be set */
+#define MACCFG2_LC 0x00000010 /* Length Check */
+#define MACCFG2_MPE 0x00000008
+#define MACCFG2_FDX 0x00000001 /* Full Duplex */
+#define MACCFG2_FDX_MASK 0x00000001
+#define MACCFG2_PAD_CRC 0x00000004
+#define MACCFG2_CRC_EN 0x00000002
+#define MACCFG2_PAD_AND_CRC_MODE_NONE 0x00000000
+#define MACCFG2_PAD_AND_CRC_MODE_CRC_ONLY 0x00000002
+#define MACCFG2_PAD_AND_CRC_MODE_PAD_AND_CRC 0x00000004
+#define MACCFG2_INTERFACE_MODE_NIBBLE 0x00000100
+#define MACCFG2_INTERFACE_MODE_BYTE 0x00000200
+#define MACCFG2_INTERFACE_MODE_MASK 0x00000300
+
+#define MACCFG2_INIT_VALUE (MACCFG2_PREL | MACCFG2_RESERVED_1 | \
+ MACCFG2_LC | MACCFG2_PAD_CRC | MACCFG2_FDX)
+
+/* UEC Event Register
+*/
+#define UCCE_MPD 0x80000000
+#define UCCE_SCAR 0x40000000
+#define UCCE_GRA 0x20000000
+#define UCCE_CBPR 0x10000000
+#define UCCE_BSY 0x08000000
+#define UCCE_RXC 0x04000000
+#define UCCE_TXC 0x02000000
+#define UCCE_TXE 0x01000000
+#define UCCE_TXB7 0x00800000
+#define UCCE_TXB6 0x00400000
+#define UCCE_TXB5 0x00200000
+#define UCCE_TXB4 0x00100000
+#define UCCE_TXB3 0x00080000
+#define UCCE_TXB2 0x00040000
+#define UCCE_TXB1 0x00020000
+#define UCCE_TXB0 0x00010000
+#define UCCE_RXB7 0x00008000
+#define UCCE_RXB6 0x00004000
+#define UCCE_RXB5 0x00002000
+#define UCCE_RXB4 0x00001000
+#define UCCE_RXB3 0x00000800
+#define UCCE_RXB2 0x00000400
+#define UCCE_RXB1 0x00000200
+#define UCCE_RXB0 0x00000100
+#define UCCE_RXF7 0x00000080
+#define UCCE_RXF6 0x00000040
+#define UCCE_RXF5 0x00000020
+#define UCCE_RXF4 0x00000010
+#define UCCE_RXF3 0x00000008
+#define UCCE_RXF2 0x00000004
+#define UCCE_RXF1 0x00000002
+#define UCCE_RXF0 0x00000001
+
+#define UCCE_TXB (UCCE_TXB7 | UCCE_TXB6 | UCCE_TXB5 | UCCE_TXB4 | \
+ UCCE_TXB3 | UCCE_TXB2 | UCCE_TXB1 | UCCE_TXB0)
+#define UCCE_RXB (UCCE_RXB7 | UCCE_RXB6 | UCCE_RXB5 | UCCE_RXB4 | \
+ UCCE_RXB3 | UCCE_RXB2 | UCCE_RXB1 | UCCE_RXB0)
+#define UCCE_RXF (UCCE_RXF7 | UCCE_RXF6 | UCCE_RXF5 | UCCE_RXF4 | \
+ UCCE_RXF3 | UCCE_RXF2 | UCCE_RXF1 | UCCE_RXF0)
+#define UCCE_OTHER (UCCE_SCAR | UCCE_GRA | UCCE_CBPR | UCCE_BSY | \
+ UCCE_RXC | UCCE_TXC | UCCE_TXE)
+
+/* UEC TEMODR Register
+*/
+#define TEMODER_SCHEDULER_ENABLE 0x2000
+#define TEMODER_IP_CHECKSUM_GENERATE 0x0400
+#define TEMODER_PERFORMANCE_OPTIMIZATION_MODE1 0x0200
+#define TEMODER_RMON_STATISTICS 0x0100
+#define TEMODER_NUM_OF_QUEUES_SHIFT (15-15)
+
+#define TEMODER_INIT_VALUE 0xc000
+
+/* UEC REMODR Register
+*/
+#define REMODER_RX_RMON_STATISTICS_ENABLE 0x00001000
+#define REMODER_RX_EXTENDED_FEATURES 0x80000000
+#define REMODER_VLAN_OPERATION_TAGGED_SHIFT (31-9 )
+#define REMODER_VLAN_OPERATION_NON_TAGGED_SHIFT (31-10)
+#define REMODER_RX_QOS_MODE_SHIFT (31-15)
+#define REMODER_RMON_STATISTICS 0x00001000
+#define REMODER_RX_EXTENDED_FILTERING 0x00000800
+#define REMODER_NUM_OF_QUEUES_SHIFT (31-23)
+#define REMODER_DYNAMIC_MAX_FRAME_LENGTH 0x00000008
+#define REMODER_DYNAMIC_MIN_FRAME_LENGTH 0x00000004
+#define REMODER_IP_CHECKSUM_CHECK 0x00000002
+#define REMODER_IP_ADDRESS_ALIGNMENT 0x00000001
+
+#define REMODER_INIT_VALUE 0
+
+/* BMRx - Bus Mode Register */
+#define BMR_GLB 0x20
+#define BMR_BO_BE 0x10
+#define BMR_DTB_SECONDARY_BUS 0x02
+#define BMR_BDB_SECONDARY_BUS 0x01
+
+#define BMR_SHIFT 24
+#define BMR_INIT_VALUE (BMR_GLB | BMR_BO_BE)
+
+/* UEC UCCS (Ethernet Status Register)
+ */
+#define UCCS_BPR 0x02
+#define UCCS_PAU 0x02
+#define UCCS_MPD 0x01
+
+/* UEC MIIMCFG (MII Management Configuration Register)
+ */
+#define MIIMCFG_RESET_MANAGEMENT 0x80000000
+#define MIIMCFG_NO_PREAMBLE 0x00000010
+#define MIIMCFG_CLOCK_DIVIDE_SHIFT (31 - 31)
+#define MIIMCFG_CLOCK_DIVIDE_MASK 0x0000000f
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_4 0x00000001
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_6 0x00000002
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_8 0x00000003
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10 0x00000004
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_14 0x00000005
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_20 0x00000006
+#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_28 0x00000007
+
+#define MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE \
+ MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10
+
+/* UEC MIIMCOM (MII Management Command Register)
+ */
+#define MIIMCOM_SCAN_CYCLE 0x00000002 /* Scan cycle */
+#define MIIMCOM_READ_CYCLE 0x00000001 /* Read cycle */
+
+/* UEC MIIMADD (MII Management Address Register)
+ */
+#define MIIMADD_PHY_ADDRESS_SHIFT (31 - 23)
+#define MIIMADD_PHY_REGISTER_SHIFT (31 - 31)
+
+/* UEC MIIMCON (MII Management Control Register)
+ */
+#define MIIMCON_PHY_CONTROL_SHIFT (31 - 31)
+#define MIIMCON_PHY_STATUS_SHIFT (31 - 31)
+
+/* UEC MIIMIND (MII Management Indicator Register)
+ */
+#define MIIMIND_NOT_VALID 0x00000004
+#define MIIMIND_SCAN 0x00000002
+#define MIIMIND_BUSY 0x00000001
+
+/* UEC UTBIPAR (Ten Bit Interface Physical Address Register)
+ */
+#define UTBIPAR_PHY_ADDRESS_SHIFT (31 - 31)
+#define UTBIPAR_PHY_ADDRESS_MASK 0x0000001f
+
+/* UEC UESCR (Ethernet Statistics Control Register)
+ */
+#define UESCR_AUTOZ 0x8000
+#define UESCR_CLRCNT 0x4000
+#define UESCR_MAXCOV_SHIFT (15 - 7)
+#define UESCR_SCOV_SHIFT (15 - 15)
+
+/****** Tx data struct collection ******/
+/* Tx thread data, each Tx thread has one this struct.
+*/
+typedef struct uec_thread_data_tx {
+ u8 res0[136];
+} __attribute__ ((packed)) uec_thread_data_tx_t;
+
+/* Tx thread parameter, each Tx thread has one this struct.
+*/
+typedef struct uec_thread_tx_pram {
+ u8 res0[64];
+} __attribute__ ((packed)) uec_thread_tx_pram_t;
+
+/* Send queue queue-descriptor, each Tx queue has one this QD
+*/
+typedef struct uec_send_queue_qd {
+ u32 bd_ring_base; /* pointer to BD ring base address */
+ u8 res0[0x8];
+ u32 last_bd_completed_address; /* last entry in BD ring */
+ u8 res1[0x30];
+} __attribute__ ((packed)) uec_send_queue_qd_t;
+
+/* Send queue memory region */
+typedef struct uec_send_queue_mem_region {
+ uec_send_queue_qd_t sqqd[MAX_TX_QUEUES];
+} __attribute__ ((packed)) uec_send_queue_mem_region_t;
+
+/* Scheduler struct
+*/
+typedef struct uec_scheduler {
+ u16 cpucount0; /* CPU packet counter */
+ u16 cpucount1; /* CPU packet counter */
+ u16 cecount0; /* QE packet counter */
+ u16 cecount1; /* QE packet counter */
+ u16 cpucount2; /* CPU packet counter */
+ u16 cpucount3; /* CPU packet counter */
+ u16 cecount2; /* QE packet counter */
+ u16 cecount3; /* QE packet counter */
+ u16 cpucount4; /* CPU packet counter */
+ u16 cpucount5; /* CPU packet counter */
+ u16 cecount4; /* QE packet counter */
+ u16 cecount5; /* QE packet counter */
+ u16 cpucount6; /* CPU packet counter */
+ u16 cpucount7; /* CPU packet counter */
+ u16 cecount6; /* QE packet counter */
+ u16 cecount7; /* QE packet counter */
+ u32 weightstatus[MAX_TX_QUEUES]; /* accumulated weight factor */
+ u32 rtsrshadow; /* temporary variable handled by QE */
+ u32 time; /* temporary variable handled by QE */
+ u32 ttl; /* temporary variable handled by QE */
+ u32 mblinterval; /* max burst length interval */
+ u16 nortsrbytetime; /* normalized value of byte time in tsr units */
+ u8 fracsiz;
+ u8 res0[1];
+ u8 strictpriorityq; /* Strict Priority Mask register */
+ u8 txasap; /* Transmit ASAP register */
+ u8 extrabw; /* Extra BandWidth register */
+ u8 oldwfqmask; /* temporary variable handled by QE */
+ u8 weightfactor[MAX_TX_QUEUES]; /**< weight factor for queues */
+ u32 minw; /* temporary variable handled by QE */
+ u8 res1[0x70-0x64];
+} __attribute__ ((packed)) uec_scheduler_t;
+
+/* Tx firmware counters
+*/
+typedef struct uec_tx_firmware_statistics_pram {
+ u32 sicoltx; /* single collision */
+ u32 mulcoltx; /* multiple collision */
+ u32 latecoltxfr; /* late collision */
+ u32 frabortduecol; /* frames aborted due to tx collision */
+ u32 frlostinmactxer; /* frames lost due to internal MAC error tx */
+ u32 carriersenseertx; /* carrier sense error */
+ u32 frtxok; /* frames transmitted OK */
+ u32 txfrexcessivedefer;
+ u32 txpkts256; /* total packets(including bad) 256~511 B */
+ u32 txpkts512; /* total packets(including bad) 512~1023B */
+ u32 txpkts1024; /* total packets(including bad) 1024~1518B */
+ u32 txpktsjumbo; /* total packets(including bad) >1024 */
+} __attribute__ ((packed)) uec_tx_firmware_statistics_pram_t;
+
+/* Tx global parameter table
+*/
+typedef struct uec_tx_global_pram {
+ u16 temoder;
+ u8 res0[0x38-0x02];
+ u32 sqptr;
+ u32 schedulerbasepointer;
+ u32 txrmonbaseptr;
+ u32 tstate;
+ u8 iphoffset[MAX_IPH_OFFSET_ENTRY];
+ u32 vtagtable[0x8];
+ u32 tqptr;
+ u8 res2[0x80-0x74];
+} __attribute__ ((packed)) uec_tx_global_pram_t;
+
+
+/****** Rx data struct collection ******/
+/* Rx thread data, each Rx thread has one this struct.
+*/
+typedef struct uec_thread_data_rx {
+ u8 res0[40];
+} __attribute__ ((packed)) uec_thread_data_rx_t;
+
+/* Rx thread parameter, each Rx thread has one this struct.
+*/
+typedef struct uec_thread_rx_pram {
+ u8 res0[128];
+} __attribute__ ((packed)) uec_thread_rx_pram_t;
+
+/* Rx firmware counters
+*/
+typedef struct uec_rx_firmware_statistics_pram {
+ u32 frrxfcser; /* frames with crc error */
+ u32 fraligner; /* frames with alignment error */
+ u32 inrangelenrxer; /* in range length error */
+ u32 outrangelenrxer; /* out of range length error */
+ u32 frtoolong; /* frame too long */
+ u32 runt; /* runt */
+ u32 verylongevent; /* very long event */
+ u32 symbolerror; /* symbol error */
+ u32 dropbsy; /* drop because of BD not ready */
+ u8 res0[0x8];
+ u32 mismatchdrop; /* drop because of MAC filtering */
+ u32 underpkts; /* total frames less than 64 octets */
+ u32 pkts256; /* total frames(including bad)256~511 B */
+ u32 pkts512; /* total frames(including bad)512~1023 B */
+ u32 pkts1024; /* total frames(including bad)1024~1518 B */
+ u32 pktsjumbo; /* total frames(including bad) >1024 B */
+ u32 frlossinmacer;
+ u32 pausefr; /* pause frames */
+ u8 res1[0x4];
+ u32 removevlan;
+ u32 replacevlan;
+ u32 insertvlan;
+} __attribute__ ((packed)) uec_rx_firmware_statistics_pram_t;
+
+/* Rx interrupt coalescing entry, each Rx queue has one this entry.
+*/
+typedef struct uec_rx_interrupt_coalescing_entry {
+ u32 maxvalue;
+ u32 counter;
+} __attribute__ ((packed)) uec_rx_interrupt_coalescing_entry_t;
+
+typedef struct uec_rx_interrupt_coalescing_table {
+ uec_rx_interrupt_coalescing_entry_t entry[MAX_RX_QUEUES];
+} __attribute__ ((packed)) uec_rx_interrupt_coalescing_table_t;
+
+/* RxBD queue entry, each Rx queue has one this entry.
+*/
+typedef struct uec_rx_bd_queues_entry {
+ u32 bdbaseptr; /* BD base pointer */
+ u32 bdptr; /* BD pointer */
+ u32 externalbdbaseptr; /* external BD base pointer */
+ u32 externalbdptr; /* external BD pointer */
+} __attribute__ ((packed)) uec_rx_bd_queues_entry_t;
+
+/* Rx global paramter table
+*/
+typedef struct uec_rx_global_pram {
+ u32 remoder; /* ethernet mode reg. */
+ u32 rqptr; /* base pointer to the Rx Queues */
+ u32 res0[0x1];
+ u8 res1[0x20-0xC];
+ u16 typeorlen;
+ u8 res2[0x1];
+ u8 rxgstpack; /* ack on GRACEFUL STOP RX command */
+ u32 rxrmonbaseptr; /* Rx RMON statistics base */
+ u8 res3[0x30-0x28];
+ u32 intcoalescingptr; /* Interrupt coalescing table pointer */
+ u8 res4[0x36-0x34];
+ u8 rstate;
+ u8 res5[0x46-0x37];
+ u16 mrblr; /* max receive buffer length reg. */
+ u32 rbdqptr; /* RxBD parameter table description */
+ u16 mflr; /* max frame length reg. */
+ u16 minflr; /* min frame length reg. */
+ u16 maxd1; /* max dma1 length reg. */
+ u16 maxd2; /* max dma2 length reg. */
+ u32 ecamptr; /* external CAM address */
+ u32 l2qt; /* VLAN priority mapping table. */
+ u32 l3qt[0x8]; /* IP priority mapping table. */
+ u16 vlantype; /* vlan type */
+ u16 vlantci; /* default vlan tci */
+ u8 addressfiltering[64];/* address filtering data structure */
+ u32 exfGlobalParam; /* extended filtering global parameters */
+ u8 res6[0x100-0xC4]; /* Initialize to zero */
+} __attribute__ ((packed)) uec_rx_global_pram_t;
+
+#define GRACEFUL_STOP_ACKNOWLEDGE_RX 0x01
+
+
+/****** UEC common ******/
+/* UCC statistics - hardware counters
+*/
+typedef struct uec_hardware_statistics {
+ u32 tx64;
+ u32 tx127;
+ u32 tx255;
+ u32 rx64;
+ u32 rx127;
+ u32 rx255;
+ u32 txok;
+ u16 txcf;
+ u32 tmca;
+ u32 tbca;
+ u32 rxfok;
+ u32 rxbok;
+ u32 rbyt;
+ u32 rmca;
+ u32 rbca;
+} __attribute__ ((packed)) uec_hardware_statistics_t;
+
+/* InitEnet command parameter
+*/
+typedef struct uec_init_cmd_pram {
+ u8 resinit0;
+ u8 resinit1;
+ u8 resinit2;
+ u8 resinit3;
+ u16 resinit4;
+ u8 res1[0x1];
+ u8 largestexternallookupkeysize;
+ u32 rgftgfrxglobal;
+ u32 rxthread[MAX_ENET_INIT_PARAM_ENTRIES_RX]; /* rx threads */
+ u8 res2[0x38 - 0x30];
+ u32 txglobal; /* tx global */
+ u32 txthread[MAX_ENET_INIT_PARAM_ENTRIES_TX]; /* tx threads */
+ u8 res3[0x1];
+} __attribute__ ((packed)) uec_init_cmd_pram_t;
+
+#define ENET_INIT_PARAM_RGF_SHIFT (32 - 4)
+#define ENET_INIT_PARAM_TGF_SHIFT (32 - 8)
+
+#define ENET_INIT_PARAM_RISC_MASK 0x0000003f
+#define ENET_INIT_PARAM_PTR_MASK 0x00ffffc0
+#define ENET_INIT_PARAM_SNUM_MASK 0xff000000
+#define ENET_INIT_PARAM_SNUM_SHIFT 24
+
+#define ENET_INIT_PARAM_MAGIC_RES_INIT0 0x06
+#define ENET_INIT_PARAM_MAGIC_RES_INIT1 0x30
+#define ENET_INIT_PARAM_MAGIC_RES_INIT2 0xff
+#define ENET_INIT_PARAM_MAGIC_RES_INIT3 0x00
+#define ENET_INIT_PARAM_MAGIC_RES_INIT4 0x0400
+
+/* structure representing 82xx Address Filtering Enet Address in PRAM
+*/
+typedef struct uec_82xx_enet_address {
+ u8 res1[0x2];
+ u16 h; /* address (MSB) */
+ u16 m; /* address */
+ u16 l; /* address (LSB) */
+} __attribute__ ((packed)) uec_82xx_enet_address_t;
+
+/* structure representing 82xx Address Filtering PRAM
+*/
+typedef struct uec_82xx_address_filtering_pram {
+ u32 iaddr_h; /* individual address filter, high */
+ u32 iaddr_l; /* individual address filter, low */
+ u32 gaddr_h; /* group address filter, high */
+ u32 gaddr_l; /* group address filter, low */
+ uec_82xx_enet_address_t taddr;
+ uec_82xx_enet_address_t paddr[4];
+ u8 res0[0x40-0x38];
+} __attribute__ ((packed)) uec_82xx_address_filtering_pram_t;
+
+/* Buffer Descriptor
+*/
+typedef struct buffer_descriptor {
+ u16 status;
+ u16 len;
+ u32 data;
+} __attribute__ ((packed)) qe_bd_t, *p_bd_t;
+
+#define SIZEOFBD sizeof(qe_bd_t)
+
+/* Common BD flags
+*/
+#define BD_WRAP 0x2000
+#define BD_INT 0x1000
+#define BD_LAST 0x0800
+#define BD_CLEAN 0x3000
+
+/* TxBD status flags
+*/
+#define TxBD_READY 0x8000
+#define TxBD_PADCRC 0x4000
+#define TxBD_WRAP BD_WRAP
+#define TxBD_INT BD_INT
+#define TxBD_LAST BD_LAST
+#define TxBD_TXCRC 0x0400
+#define TxBD_DEF 0x0200
+#define TxBD_PP 0x0100
+#define TxBD_LC 0x0080
+#define TxBD_RL 0x0040
+#define TxBD_RC 0x003C
+#define TxBD_UNDERRUN 0x0002
+#define TxBD_TRUNC 0x0001
+
+#define TxBD_ERROR (TxBD_UNDERRUN | TxBD_TRUNC)
+
+/* RxBD status flags
+*/
+#define RxBD_EMPTY 0x8000
+#define RxBD_OWNER 0x4000
+#define RxBD_WRAP BD_WRAP
+#define RxBD_INT BD_INT
+#define RxBD_LAST BD_LAST
+#define RxBD_FIRST 0x0400
+#define RxBD_CMR 0x0200
+#define RxBD_MISS 0x0100
+#define RxBD_BCAST 0x0080
+#define RxBD_MCAST 0x0040
+#define RxBD_LG 0x0020
+#define RxBD_NO 0x0010
+#define RxBD_SHORT 0x0008
+#define RxBD_CRCERR 0x0004
+#define RxBD_OVERRUN 0x0002
+#define RxBD_IPCH 0x0001
+
+#define RxBD_ERROR (RxBD_LG | RxBD_NO | RxBD_SHORT | \
+ RxBD_CRCERR | RxBD_OVERRUN)
+
+/* BD access macros
+*/
+#define BD_STATUS(_bd) (((p_bd_t)(_bd))->status)
+#define BD_STATUS_SET(_bd, _val) (((p_bd_t)(_bd))->status = _val)
+#define BD_LENGTH(_bd) (((p_bd_t)(_bd))->len)
+#define BD_LENGTH_SET(_bd, _val) (((p_bd_t)(_bd))->len = _val)
+#define BD_DATA_CLEAR(_bd) (((p_bd_t)(_bd))->data = 0)
+#define BD_IS_DATA(_bd) (((p_bd_t)(_bd))->data)
+#define BD_DATA(_bd) ((u8 *)(((p_bd_t)(_bd))->data))
+#define BD_DATA_SET(_bd, _data) (((p_bd_t)(_bd))->data = (u32)(_data))
+#define BD_ADVANCE(_bd,_status,_base) \
+ (((_status) & BD_WRAP) ? (_bd) = ((p_bd_t)(_base)) : ++(_bd))
+
+/* Rx Prefetched BDs
+*/
+typedef struct uec_rx_prefetched_bds {
+ qe_bd_t bd[MAX_PREFETCHED_BDS]; /* prefetched bd */
+} __attribute__ ((packed)) uec_rx_prefetched_bds_t;
+
+/* Alignments
+ */
+#define UEC_RX_GLOBAL_PRAM_ALIGNMENT 64
+#define UEC_TX_GLOBAL_PRAM_ALIGNMENT 64
+#define UEC_THREAD_RX_PRAM_ALIGNMENT 128
+#define UEC_THREAD_TX_PRAM_ALIGNMENT 64
+#define UEC_THREAD_DATA_ALIGNMENT 256
+#define UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT 32
+#define UEC_SCHEDULER_ALIGNMENT 4
+#define UEC_TX_STATISTICS_ALIGNMENT 4
+#define UEC_RX_STATISTICS_ALIGNMENT 4
+#define UEC_RX_INTERRUPT_COALESCING_ALIGNMENT 4
+#define UEC_RX_BD_QUEUES_ALIGNMENT 8
+#define UEC_RX_PREFETCHED_BDS_ALIGNMENT 128
+#define UEC_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT 4
+#define UEC_RX_BD_RING_ALIGNMENT 32
+#define UEC_TX_BD_RING_ALIGNMENT 32
+#define UEC_MRBLR_ALIGNMENT 128
+#define UEC_RX_BD_RING_SIZE_ALIGNMENT 4
+#define UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT 32
+#define UEC_RX_DATA_BUF_ALIGNMENT 64
+
+#define UEC_VLAN_PRIORITY_MAX 8
+#define UEC_IP_PRIORITY_MAX 64
+#define UEC_TX_VTAG_TABLE_ENTRY_MAX 8
+#define UEC_RX_BD_RING_SIZE_MIN 8
+#define UEC_TX_BD_RING_SIZE_MIN 2
+
+/* Ethernet speed
+*/
+typedef enum enet_speed {
+ ENET_SPEED_10BT, /* 10 Base T */
+ ENET_SPEED_100BT, /* 100 Base T */
+ ENET_SPEED_1000BT /* 1000 Base T */
+} enet_speed_e;
+
+/* Ethernet Address Type.
+*/
+typedef enum enet_addr_type {
+ ENET_ADDR_TYPE_INDIVIDUAL,
+ ENET_ADDR_TYPE_GROUP,
+ ENET_ADDR_TYPE_BROADCAST
+} enet_addr_type_e;
+
+/* TBI / MII Set Register
+*/
+typedef enum enet_tbi_mii_reg {
+ ENET_TBI_MII_CR = 0x00,
+ ENET_TBI_MII_SR = 0x01,
+ ENET_TBI_MII_ANA = 0x04,
+ ENET_TBI_MII_ANLPBPA = 0x05,
+ ENET_TBI_MII_ANEX = 0x06,
+ ENET_TBI_MII_ANNPT = 0x07,
+ ENET_TBI_MII_ANLPANP = 0x08,
+ ENET_TBI_MII_EXST = 0x0F,
+ ENET_TBI_MII_JD = 0x10,
+ ENET_TBI_MII_TBICON = 0x11
+} enet_tbi_mii_reg_e;
+
+/* TBI MDIO register bit fields*/
+#define TBICON_CLK_SELECT 0x0020
+#define TBIANA_ASYMMETRIC_PAUSE 0x0100
+#define TBIANA_SYMMETRIC_PAUSE 0x0080
+#define TBIANA_HALF_DUPLEX 0x0040
+#define TBIANA_FULL_DUPLEX 0x0020
+#define TBICR_PHY_RESET 0x8000
+#define TBICR_ANEG_ENABLE 0x1000
+#define TBICR_RESTART_ANEG 0x0200
+#define TBICR_FULL_DUPLEX 0x0100
+#define TBICR_SPEED1_SET 0x0040
+
+#define TBIANA_SETTINGS ( \
+ TBIANA_ASYMMETRIC_PAUSE \
+ | TBIANA_SYMMETRIC_PAUSE \
+ | TBIANA_FULL_DUPLEX \
+ )
+
+#define TBICR_SETTINGS ( \
+ TBICR_PHY_RESET \
+ | TBICR_ANEG_ENABLE \
+ | TBICR_FULL_DUPLEX \
+ | TBICR_SPEED1_SET \
+ )
+
+/* UEC number of threads
+*/
+typedef enum uec_num_of_threads {
+ UEC_NUM_OF_THREADS_1 = 0x1, /* 1 */
+ UEC_NUM_OF_THREADS_2 = 0x2, /* 2 */
+ UEC_NUM_OF_THREADS_4 = 0x0, /* 4 */
+ UEC_NUM_OF_THREADS_6 = 0x3, /* 6 */
+ UEC_NUM_OF_THREADS_8 = 0x4 /* 8 */
+} uec_num_of_threads_e;
+
+/* UEC initialization info struct
+*/
+#define STD_UEC_INFO(num) \
+{ \
+ .uf_info = { \
+ .ucc_num = CONFIG_SYS_UEC##num##_UCC_NUM,\
+ .rx_clock = CONFIG_SYS_UEC##num##_RX_CLK, \
+ .tx_clock = CONFIG_SYS_UEC##num##_TX_CLK, \
+ .eth_type = CONFIG_SYS_UEC##num##_ETH_TYPE,\
+ }, \
+ .num_threads_tx = UEC_NUM_OF_THREADS_1, \
+ .num_threads_rx = UEC_NUM_OF_THREADS_1, \
+ .risc_tx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, \
+ .risc_rx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, \
+ .tx_bd_ring_len = 16, \
+ .rx_bd_ring_len = 16, \
+ .phy_address = CONFIG_SYS_UEC##num##_PHY_ADDR, \
+ .enet_interface_type = CONFIG_SYS_UEC##num##_INTERFACE_TYPE, \
+ .speed = CONFIG_SYS_UEC##num##_INTERFACE_SPEED, \
+}
+
+typedef struct uec_info {
+ ucc_fast_info_t uf_info;
+ uec_num_of_threads_e num_threads_tx;
+ uec_num_of_threads_e num_threads_rx;
+ unsigned int risc_tx;
+ unsigned int risc_rx;
+ u16 rx_bd_ring_len;
+ u16 tx_bd_ring_len;
+ u8 phy_address;
+ phy_interface_t enet_interface_type;
+ int speed;
+} uec_info_t;
+
+/* UEC driver initialized info
+*/
+#define MAX_RXBUF_LEN 1536
+#define MAX_FRAME_LEN 1518
+#define MIN_FRAME_LEN 64
+#define MAX_DMA1_LEN 1520
+#define MAX_DMA2_LEN 1520
+
+/* UEC driver private struct
+*/
+typedef struct uec_private {
+ uec_info_t *uec_info;
+ ucc_fast_private_t *uccf;
+ struct eth_device *dev;
+ uec_t *uec_regs;
+ /* enet init command parameter */
+ uec_init_cmd_pram_t *p_init_enet_param;
+ u32 init_enet_param_offset;
+ /* Rx and Tx paramter */
+ uec_rx_global_pram_t *p_rx_glbl_pram;
+ u32 rx_glbl_pram_offset;
+ uec_tx_global_pram_t *p_tx_glbl_pram;
+ u32 tx_glbl_pram_offset;
+ uec_send_queue_mem_region_t *p_send_q_mem_reg;
+ u32 send_q_mem_reg_offset;
+ uec_thread_data_tx_t *p_thread_data_tx;
+ u32 thread_dat_tx_offset;
+ uec_thread_data_rx_t *p_thread_data_rx;
+ u32 thread_dat_rx_offset;
+ uec_rx_bd_queues_entry_t *p_rx_bd_qs_tbl;
+ u32 rx_bd_qs_tbl_offset;
+ /* BDs specific */
+ u8 *p_tx_bd_ring;
+ u32 tx_bd_ring_offset;
+ u8 *p_rx_bd_ring;
+ u32 rx_bd_ring_offset;
+ u8 *p_rx_buf;
+ u32 rx_buf_offset;
+ volatile qe_bd_t *txBd;
+ volatile qe_bd_t *rxBd;
+ /* Status */
+ int mac_tx_enabled;
+ int mac_rx_enabled;
+ int grace_stopped_tx;
+ int grace_stopped_rx;
+ int the_first_run;
+#if !defined(COFIG_DM)
+ /* PHY specific */
+ struct uec_mii_info *mii_info;
+ int oldspeed;
+ int oldduplex;
+ int oldlink;
+#endif
+} uec_private_t;
+
+int uec_initialize(bd_t *bis, uec_info_t *uec_info);
+int uec_eth_init(bd_t *bis, uec_info_t *uecs, int num);
+int uec_standard_init(bd_t *bis);
+#endif /* __UEC_H__ */
diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c
index 9beb5d90ac..41cf54b488 100644
--- a/drivers/qe/uccf.c
+++ b/drivers/qe/uccf.c
@@ -14,6 +14,7 @@
#include "uccf.h"
#include <fsl_qe.h>
+#if !defined(CONFIG_DM_ETH)
void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf)
{
out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
@@ -386,3 +387,4 @@ int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret)
*uccf_ret = uccf;
return 0;
}
+#endif
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 69cdf9444a..ccae3d9ce4 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -18,6 +18,7 @@
#include <fsl_qe.h>
#include <phy.h>
+#if !defined(CONFIG_DM_ETH)
/* Default UTBIPAR SMI address */
#ifndef CONFIG_UTBIPAR_INIT_TBIPA
#define CONFIG_UTBIPAR_INIT_TBIPA 0x1F
@@ -1428,3 +1429,4 @@ int uec_standard_init(bd_t *bis)
{
return uec_eth_init(bis, uec_info, ARRAY_SIZE(uec_info));
}
+#endif
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 9425379794..02198fb6db 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -22,6 +22,8 @@
#include <fsl_qe.h>
#include <phy.h>
+#if !defined(CONFIG_DM_ETH)
+
#define ugphy_printk(format, arg...) \
printf(format "\n", ## arg)
@@ -909,3 +911,4 @@ void change_phy_interface_mode (struct eth_device *dev,
marvell_phy_interface_mode (dev, type, speed);
#endif
}
+#endif
--
2.24.1
More information about the U-Boot
mailing list