[PATCH v7 4/7] lib: rsa: generate additional parameters for public key
AKASHI Takahiro
takahiro.akashi at linaro.org
Fri Feb 21 07:12:58 CET 2020
In the current implementation of FIT_SIGNATURE, five parameters for
a RSA public key are required while only two of them are essential.
(See rsa-mod-exp.h and uImage.FIT/signature.txt)
This is a result of considering relatively limited computer power
and resources on embedded systems, while such a assumption may not
be quite practical for other use cases.
In this patch, added is a function, rsa_gen_key_prop(), which will
generate additional parameters for other uses, in particular
UEFI secure boot, on the fly.
Note: the current code uses some "big number" routines from BearSSL
for the calculation.
Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
---
include/u-boot/rsa-mod-exp.h | 23 ++
lib/rsa/Kconfig | 3 +
lib/rsa/Makefile | 1 +
lib/rsa/rsa-keyprop.c | 725 +++++++++++++++++++++++++++++++++++
4 files changed, 752 insertions(+)
create mode 100644 lib/rsa/rsa-keyprop.c
diff --git a/include/u-boot/rsa-mod-exp.h b/include/u-boot/rsa-mod-exp.h
index 8a428c4b6a1a..1da8af1bb83d 100644
--- a/include/u-boot/rsa-mod-exp.h
+++ b/include/u-boot/rsa-mod-exp.h
@@ -26,6 +26,29 @@ struct key_prop {
uint32_t exp_len; /* Exponent length in number of uint8_t */
};
+/**
+ * rsa_gen_key_prop() - Generate key properties of RSA public key
+ * @key: Specifies key data in DER format
+ * @keylen: Length of @key
+ * @prop: Generated key property
+ *
+ * This function takes a blob of encoded RSA public key data in DER
+ * format, parse it and generate all the relevant properties
+ * in key_prop structure.
+ * Return a pointer to struct key_prop in @prop on success.
+ *
+ * Return: 0 on success, negative on error
+ */
+int rsa_gen_key_prop(const void *key, uint32_t keylen, struct key_prop **proc);
+
+/**
+ * rsa_free_key_prop() - Free key properties
+ * @prop: Pointer to struct key_prop
+ *
+ * This function frees all the memories allocated by rsa_gen_key_prop().
+ */
+void rsa_free_key_prop(struct key_prop *prop);
+
/**
* rsa_mod_exp_sw() - Perform RSA Modular Exponentiation in sw
*
diff --git a/lib/rsa/Kconfig b/lib/rsa/Kconfig
index 89697219db2d..a90d67e5a87b 100644
--- a/lib/rsa/Kconfig
+++ b/lib/rsa/Kconfig
@@ -31,6 +31,9 @@ config RSA_VERIFY
config RSA_VERIFY_WITH_PKEY
bool "Execute RSA verification without key parameters from FDT"
select RSA_VERIFY
+ select ASYMMETRIC_KEY_TYPE
+ select ASYMMETRIC_PUBLIC_KEY_SUBTYPE
+ select RSA_PUBLIC_KEY_PARSER
help
The standard RSA-signature verification code (FIT_SIGNATURE) uses
pre-calculated key properties, that are stored in fdt blob, in
diff --git a/lib/rsa/Makefile b/lib/rsa/Makefile
index c07305188e0c..14ed3cb4012b 100644
--- a/lib/rsa/Makefile
+++ b/lib/rsa/Makefile
@@ -6,4 +6,5 @@
# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
obj-$(CONFIG_$(SPL_)RSA_VERIFY) += rsa-verify.o rsa-checksum.o
+obj-$(CONFIG_RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o
obj-$(CONFIG_RSA_SOFTWARE_EXP) += rsa-mod-exp.o
diff --git a/lib/rsa/rsa-keyprop.c b/lib/rsa/rsa-keyprop.c
new file mode 100644
index 000000000000..9464df009343
--- /dev/null
+++ b/lib/rsa/rsa-keyprop.c
@@ -0,0 +1,725 @@
+// SPDX-License-Identifier: GPL-2.0+ and MIT
+/*
+ * RSA library - generate parameters for a public key
+ *
+ * Copyright (c) 2019 Linaro Limited
+ * Author: AKASHI Takahiro
+ *
+ * Big number routines in this file come from BearSSL:
+ * Copyright (c) 2016 Thomas Pornin <pornin at bolet.org>
+ */
+
+#include <common.h>
+#include <image.h>
+#include <malloc.h>
+#include <asm/byteorder.h>
+#include <crypto/internal/rsa.h>
+#include <u-boot/rsa-mod-exp.h>
+
+/**
+ * br_dec16be() - Convert 16-bit big-endian integer to native
+ * @src: Pointer to data
+ * Return: Native-endian integer
+ */
+static unsigned br_dec16be(const void *src)
+{
+ return be16_to_cpup(src);
+}
+
+/**
+ * br_dec32be() - Convert 32-bit big-endian integer to native
+ * @src: Pointer to data
+ * Return: Native-endian integer
+ */
+static uint32_t br_dec32be(const void *src)
+{
+ return be32_to_cpup(src);
+}
+
+/**
+ * br_enc32be() - Convert native 32-bit integer to big-endian
+ * @dst: Pointer to buffer to store big-endian integer in
+ * @x: Native 32-bit integer
+ */
+static void br_enc32be(void *dst, uint32_t x)
+{
+ __be32 tmp;
+
+ tmp = cpu_to_be32(x);
+ memcpy(dst, &tmp, sizeof(tmp));
+}
+
+/* from BearSSL's src/inner.h */
+
+/*
+ * Negate a boolean.
+ */
+static uint32_t NOT(uint32_t ctl)
+{
+ return ctl ^ 1;
+}
+
+/*
+ * Multiplexer: returns x if ctl == 1, y if ctl == 0.
+ */
+static uint32_t MUX(uint32_t ctl, uint32_t x, uint32_t y)
+{
+ return y ^ (-ctl & (x ^ y));
+}
+
+/*
+ * Equality check: returns 1 if x == y, 0 otherwise.
+ */
+static uint32_t EQ(uint32_t x, uint32_t y)
+{
+ uint32_t q;
+
+ q = x ^ y;
+ return NOT((q | -q) >> 31);
+}
+
+/*
+ * Inequality check: returns 1 if x != y, 0 otherwise.
+ */
+static uint32_t NEQ(uint32_t x, uint32_t y)
+{
+ uint32_t q;
+
+ q = x ^ y;
+ return (q | -q) >> 31;
+}
+
+/*
+ * Comparison: returns 1 if x > y, 0 otherwise.
+ */
+static uint32_t GT(uint32_t x, uint32_t y)
+{
+ /*
+ * If both x < 2^31 and y < 2^31, then y-x will have its high
+ * bit set if x > y, cleared otherwise.
+ *
+ * If either x >= 2^31 or y >= 2^31 (but not both), then the
+ * result is the high bit of x.
+ *
+ * If both x >= 2^31 and y >= 2^31, then we can virtually
+ * subtract 2^31 from both, and we are back to the first case.
+ * Since (y-2^31)-(x-2^31) = y-x, the subtraction is already
+ * fine.
+ */
+ uint32_t z;
+
+ z = y - x;
+ return (z ^ ((x ^ y) & (x ^ z))) >> 31;
+}
+
+/*
+ * Compute the bit length of a 32-bit integer. Returned value is between 0
+ * and 32 (inclusive).
+ */
+static uint32_t BIT_LENGTH(uint32_t x)
+{
+ uint32_t k, c;
+
+ k = NEQ(x, 0);
+ c = GT(x, 0xFFFF); x = MUX(c, x >> 16, x); k += c << 4;
+ c = GT(x, 0x00FF); x = MUX(c, x >> 8, x); k += c << 3;
+ c = GT(x, 0x000F); x = MUX(c, x >> 4, x); k += c << 2;
+ c = GT(x, 0x0003); x = MUX(c, x >> 2, x); k += c << 1;
+ k += GT(x, 0x0001);
+ return k;
+}
+
+#define GE(x, y) NOT(GT(y, x))
+#define LT(x, y) GT(y, x)
+#define MUL(x, y) ((uint64_t)(x) * (uint64_t)(y))
+
+/*
+ * Integers 'i32'
+ * --------------
+ *
+ * The 'i32' functions implement computations on big integers using
+ * an internal representation as an array of 32-bit integers. For
+ * an array x[]:
+ * -- x[0] contains the "announced bit length" of the integer
+ * -- x[1], x[2]... contain the value in little-endian order (x[1]
+ * contains the least significant 32 bits)
+ *
+ * Multiplications rely on the elementary 32x32->64 multiplication.
+ *
+ * The announced bit length specifies the number of bits that are
+ * significant in the subsequent 32-bit words. Unused bits in the
+ * last (most significant) word are set to 0; subsequent words are
+ * uninitialized and need not exist at all.
+ *
+ * The execution time and memory access patterns of all computations
+ * depend on the announced bit length, but not on the actual word
+ * values. For modular integers, the announced bit length of any integer
+ * modulo n is equal to the actual bit length of n; thus, computations
+ * on modular integers are "constant-time" (only the modulus length may
+ * leak).
+ */
+
+/*
+ * Extract one word from an integer. The offset is counted in bits.
+ * The word MUST entirely fit within the word elements corresponding
+ * to the announced bit length of a[].
+ */
+static uint32_t br_i32_word(const uint32_t *a, uint32_t off)
+{
+ size_t u;
+ unsigned j;
+
+ u = (size_t)(off >> 5) + 1;
+ j = (unsigned)off & 31;
+ if (j == 0) {
+ return a[u];
+ } else {
+ return (a[u] >> j) | (a[u + 1] << (32 - j));
+ }
+}
+
+/* from BearSSL's src/int/i32_bitlen.c */
+
+/*
+ * Compute the actual bit length of an integer. The argument x should
+ * point to the first (least significant) value word of the integer.
+ * The len 'xlen' contains the number of 32-bit words to access.
+ *
+ * CT: value or length of x does not leak.
+ */
+static uint32_t br_i32_bit_length(uint32_t *x, size_t xlen)
+{
+ uint32_t tw, twk;
+
+ tw = 0;
+ twk = 0;
+ while (xlen -- > 0) {
+ uint32_t w, c;
+
+ c = EQ(tw, 0);
+ w = x[xlen];
+ tw = MUX(c, w, tw);
+ twk = MUX(c, (uint32_t)xlen, twk);
+ }
+ return (twk << 5) + BIT_LENGTH(tw);
+}
+
+/* from BearSSL's src/int/i32_decode.c */
+
+/*
+ * Decode an integer from its big-endian unsigned representation. The
+ * "true" bit length of the integer is computed, but all words of x[]
+ * corresponding to the full 'len' bytes of the source are set.
+ *
+ * CT: value or length of x does not leak.
+ */
+static void br_i32_decode(uint32_t *x, const void *src, size_t len)
+{
+ const unsigned char *buf;
+ size_t u, v;
+
+ buf = src;
+ u = len;
+ v = 1;
+ for (;;) {
+ if (u < 4) {
+ uint32_t w;
+
+ if (u < 2) {
+ if (u == 0) {
+ break;
+ } else {
+ w = buf[0];
+ }
+ } else {
+ if (u == 2) {
+ w = br_dec16be(buf);
+ } else {
+ w = ((uint32_t)buf[0] << 16)
+ | br_dec16be(buf + 1);
+ }
+ }
+ x[v ++] = w;
+ break;
+ } else {
+ u -= 4;
+ x[v ++] = br_dec32be(buf + u);
+ }
+ }
+ x[0] = br_i32_bit_length(x + 1, v - 1);
+}
+
+/* from BearSSL's src/int/i32_encode.c */
+
+/*
+ * Encode an integer into its big-endian unsigned representation. The
+ * output length in bytes is provided (parameter 'len'); if the length
+ * is too short then the integer is appropriately truncated; if it is
+ * too long then the extra bytes are set to 0.
+ */
+static void br_i32_encode(void *dst, size_t len, const uint32_t *x)
+{
+ unsigned char *buf;
+ size_t k;
+
+ buf = dst;
+
+ /*
+ * Compute the announced size of x in bytes; extra bytes are
+ * filled with zeros.
+ */
+ k = (x[0] + 7) >> 3;
+ while (len > k) {
+ *buf ++ = 0;
+ len --;
+ }
+
+ /*
+ * Now we use k as index within x[]. That index starts at 1;
+ * we initialize it to the topmost complete word, and process
+ * any remaining incomplete word.
+ */
+ k = (len + 3) >> 2;
+ switch (len & 3) {
+ case 3:
+ *buf ++ = x[k] >> 16;
+ /* fall through */
+ case 2:
+ *buf ++ = x[k] >> 8;
+ /* fall through */
+ case 1:
+ *buf ++ = x[k];
+ k --;
+ }
+
+ /*
+ * Encode all complete words.
+ */
+ while (k > 0) {
+ br_enc32be(buf, x[k]);
+ k --;
+ buf += 4;
+ }
+}
+
+/* from BearSSL's src/int/i32_ninv32.c */
+
+/*
+ * Compute -(1/x) mod 2^32. If x is even, then this function returns 0.
+ */
+static uint32_t br_i32_ninv32(uint32_t x)
+{
+ uint32_t y;
+
+ y = 2 - x;
+ y *= 2 - y * x;
+ y *= 2 - y * x;
+ y *= 2 - y * x;
+ y *= 2 - y * x;
+ return MUX(x & 1, -y, 0);
+}
+
+/* from BearSSL's src/int/i32_add.c */
+
+/*
+ * Add b[] to a[] and return the carry (0 or 1). If ctl is 0, then a[]
+ * is unmodified, but the carry is still computed and returned. The
+ * arrays a[] and b[] MUST have the same announced bit length.
+ *
+ * a[] and b[] MAY be the same array, but partial overlap is not allowed.
+ */
+static uint32_t br_i32_add(uint32_t *a, const uint32_t *b, uint32_t ctl)
+{
+ uint32_t cc;
+ size_t u, m;
+
+ cc = 0;
+ m = (a[0] + 63) >> 5;
+ for (u = 1; u < m; u ++) {
+ uint32_t aw, bw, naw;
+
+ aw = a[u];
+ bw = b[u];
+ naw = aw + bw + cc;
+
+ /*
+ * Carry is 1 if naw < aw. Carry is also 1 if naw == aw
+ * AND the carry was already 1.
+ */
+ cc = (cc & EQ(naw, aw)) | LT(naw, aw);
+ a[u] = MUX(ctl, naw, aw);
+ }
+ return cc;
+}
+
+/* from BearSSL's src/int/i32_sub.c */
+
+/*
+ * Subtract b[] from a[] and return the carry (0 or 1). If ctl is 0,
+ * then a[] is unmodified, but the carry is still computed and returned.
+ * The arrays a[] and b[] MUST have the same announced bit length.
+ *
+ * a[] and b[] MAY be the same array, but partial overlap is not allowed.
+ */
+static uint32_t br_i32_sub(uint32_t *a, const uint32_t *b, uint32_t ctl)
+{
+ uint32_t cc;
+ size_t u, m;
+
+ cc = 0;
+ m = (a[0] + 63) >> 5;
+ for (u = 1; u < m; u ++) {
+ uint32_t aw, bw, naw;
+
+ aw = a[u];
+ bw = b[u];
+ naw = aw - bw - cc;
+
+ /*
+ * Carry is 1 if naw > aw. Carry is 1 also if naw == aw
+ * AND the carry was already 1.
+ */
+ cc = (cc & EQ(naw, aw)) | GT(naw, aw);
+ a[u] = MUX(ctl, naw, aw);
+ }
+ return cc;
+}
+
+/* from BearSSL's src/int/i32_div32.c */
+
+/*
+ * Constant-time division. The dividend hi:lo is divided by the
+ * divisor d; the quotient is returned and the remainder is written
+ * in *r. If hi == d, then the quotient does not fit on 32 bits;
+ * returned value is thus truncated. If hi > d, returned values are
+ * indeterminate.
+ */
+static uint32_t br_divrem(uint32_t hi, uint32_t lo, uint32_t d, uint32_t *r)
+{
+ /* TODO: optimize this */
+ uint32_t q;
+ uint32_t ch, cf;
+ int k;
+
+ q = 0;
+ ch = EQ(hi, d);
+ hi = MUX(ch, 0, hi);
+ for (k = 31; k > 0; k --) {
+ int j;
+ uint32_t w, ctl, hi2, lo2;
+
+ j = 32 - k;
+ w = (hi << j) | (lo >> k);
+ ctl = GE(w, d) | (hi >> k);
+ hi2 = (w - d) >> j;
+ lo2 = lo - (d << k);
+ hi = MUX(ctl, hi2, hi);
+ lo = MUX(ctl, lo2, lo);
+ q |= ctl << k;
+ }
+ cf = GE(lo, d) | hi;
+ q |= cf;
+ *r = MUX(cf, lo - d, lo);
+ return q;
+}
+
+/*
+ * Wrapper for br_divrem(); the remainder is returned, and the quotient
+ * is discarded.
+ */
+static uint32_t br_rem(uint32_t hi, uint32_t lo, uint32_t d)
+{
+ uint32_t r;
+
+ br_divrem(hi, lo, d, &r);
+ return r;
+}
+
+/*
+ * Wrapper for br_divrem(); the quotient is returned, and the remainder
+ * is discarded.
+ */
+static uint32_t br_div(uint32_t hi, uint32_t lo, uint32_t d)
+{
+ uint32_t r;
+
+ return br_divrem(hi, lo, d, &r);
+}
+
+/* from BearSSL's src/int/i32_muladd.c */
+
+/*
+ * Multiply x[] by 2^32 and then add integer z, modulo m[]. This
+ * function assumes that x[] and m[] have the same announced bit
+ * length, and the announced bit length of m[] matches its true
+ * bit length.
+ *
+ * x[] and m[] MUST be distinct arrays.
+ *
+ * CT: only the common announced bit length of x and m leaks, not
+ * the values of x, z or m.
+ */
+static void br_i32_muladd_small(uint32_t *x, uint32_t z, const uint32_t *m)
+{
+ uint32_t m_bitlen;
+ size_t u, mlen;
+ uint32_t a0, a1, b0, hi, g, q, tb;
+ uint32_t chf, clow, under, over;
+ uint64_t cc;
+
+ /*
+ * We can test on the modulus bit length since we accept to
+ * leak that length.
+ */
+ m_bitlen = m[0];
+ if (m_bitlen == 0) {
+ return;
+ }
+ if (m_bitlen <= 32) {
+ x[1] = br_rem(x[1], z, m[1]);
+ return;
+ }
+ mlen = (m_bitlen + 31) >> 5;
+
+ /*
+ * Principle: we estimate the quotient (x*2^32+z)/m by
+ * doing a 64/32 division with the high words.
+ *
+ * Let:
+ * w = 2^32
+ * a = (w*a0 + a1) * w^N + a2
+ * b = b0 * w^N + b2
+ * such that:
+ * 0 <= a0 < w
+ * 0 <= a1 < w
+ * 0 <= a2 < w^N
+ * w/2 <= b0 < w
+ * 0 <= b2 < w^N
+ * a < w*b
+ * I.e. the two top words of a are a0:a1, the top word of b is
+ * b0, we ensured that b0 is "full" (high bit set), and a is
+ * such that the quotient q = a/b fits on one word (0 <= q < w).
+ *
+ * If a = b*q + r (with 0 <= r < q), we can estimate q by
+ * doing an Euclidean division on the top words:
+ * a0*w+a1 = b0*u + v (with 0 <= v < w)
+ * Then the following holds:
+ * 0 <= u <= w
+ * u-2 <= q <= u
+ */
+ a0 = br_i32_word(x, m_bitlen - 32);
+ hi = x[mlen];
+ memmove(x + 2, x + 1, (mlen - 1) * sizeof *x);
+ x[1] = z;
+ a1 = br_i32_word(x, m_bitlen - 32);
+ b0 = br_i32_word(m, m_bitlen - 32);
+
+ /*
+ * We estimate a divisor q. If the quotient returned by br_div()
+ * is g:
+ * -- If a0 == b0 then g == 0; we want q = 0xFFFFFFFF.
+ * -- Otherwise:
+ * -- if g == 0 then we set q = 0;
+ * -- otherwise, we set q = g - 1.
+ * The properties described above then ensure that the true
+ * quotient is q-1, q or q+1.
+ */
+ g = br_div(a0, a1, b0);
+ q = MUX(EQ(a0, b0), 0xFFFFFFFF, MUX(EQ(g, 0), 0, g - 1));
+
+ /*
+ * We subtract q*m from x (with the extra high word of value 'hi').
+ * Since q may be off by 1 (in either direction), we may have to
+ * add or subtract m afterwards.
+ *
+ * The 'tb' flag will be true (1) at the end of the loop if the
+ * result is greater than or equal to the modulus (not counting
+ * 'hi' or the carry).
+ */
+ cc = 0;
+ tb = 1;
+ for (u = 1; u <= mlen; u ++) {
+ uint32_t mw, zw, xw, nxw;
+ uint64_t zl;
+
+ mw = m[u];
+ zl = MUL(mw, q) + cc;
+ cc = (uint32_t)(zl >> 32);
+ zw = (uint32_t)zl;
+ xw = x[u];
+ nxw = xw - zw;
+ cc += (uint64_t)GT(nxw, xw);
+ x[u] = nxw;
+ tb = MUX(EQ(nxw, mw), tb, GT(nxw, mw));
+ }
+
+ /*
+ * If we underestimated q, then either cc < hi (one extra bit
+ * beyond the top array word), or cc == hi and tb is true (no
+ * extra bit, but the result is not lower than the modulus). In
+ * these cases we must subtract m once.
+ *
+ * Otherwise, we may have overestimated, which will show as
+ * cc > hi (thus a negative result). Correction is adding m once.
+ */
+ chf = (uint32_t)(cc >> 32);
+ clow = (uint32_t)cc;
+ over = chf | GT(clow, hi);
+ under = ~over & (tb | (~chf & LT(clow, hi)));
+ br_i32_add(x, m, over);
+ br_i32_sub(x, m, under);
+}
+
+/* from BearSSL's src/int/i32_reduce.c */
+
+/*
+ * Reduce an integer (a[]) modulo another (m[]). The result is written
+ * in x[] and its announced bit length is set to be equal to that of m[].
+ *
+ * x[] MUST be distinct from a[] and m[].
+ *
+ * CT: only announced bit lengths leak, not values of x, a or m.
+ */
+static void br_i32_reduce(uint32_t *x, const uint32_t *a, const uint32_t *m)
+{
+ uint32_t m_bitlen, a_bitlen;
+ size_t mlen, alen, u;
+
+ m_bitlen = m[0];
+ mlen = (m_bitlen + 31) >> 5;
+
+ x[0] = m_bitlen;
+ if (m_bitlen == 0) {
+ return;
+ }
+
+ /*
+ * If the source is shorter, then simply copy all words from a[]
+ * and zero out the upper words.
+ */
+ a_bitlen = a[0];
+ alen = (a_bitlen + 31) >> 5;
+ if (a_bitlen < m_bitlen) {
+ memcpy(x + 1, a + 1, alen * sizeof *a);
+ for (u = alen; u < mlen; u ++) {
+ x[u + 1] = 0;
+ }
+ return;
+ }
+
+ /*
+ * The source length is at least equal to that of the modulus.
+ * We must thus copy N-1 words, and input the remaining words
+ * one by one.
+ */
+ memcpy(x + 1, a + 2 + (alen - mlen), (mlen - 1) * sizeof *a);
+ x[mlen] = 0;
+ for (u = 1 + alen - mlen; u > 0; u --) {
+ br_i32_muladd_small(x, a[u], m);
+ }
+}
+
+/**
+ * rsa_free_key_prop() - Free key properties
+ * @prop: Pointer to struct key_prop
+ *
+ * This function frees all the memories allocated by rsa_gen_key_prop().
+ */
+void rsa_free_key_prop(struct key_prop *prop)
+{
+ if (!prop)
+ return;
+
+ free((void *)prop->modulus);
+ free((void *)prop->public_exponent);
+ free((void *)prop->rr);
+
+ free(prop);
+}
+
+/**
+ * rsa_gen_key_prop() - Generate key properties of RSA public key
+ * @key: Specifies key data in DER format
+ * @keylen: Length of @key
+ * @prop: Generated key property
+ *
+ * This function takes a blob of encoded RSA public key data in DER
+ * format, parse it and generate all the relevant properties
+ * in key_prop structure.
+ * Return a pointer to struct key_prop in @prop on success.
+ *
+ * Return: 0 on success, negative on error
+ */
+int rsa_gen_key_prop(const void *key, uint32_t keylen, struct key_prop **prop)
+{
+ struct rsa_key rsa_key;
+ uint32_t *n = NULL, *rr = NULL, *rrtmp = NULL;
+ const int max_rsa_size = 4096;
+ int rlen, i, ret;
+
+ *prop = calloc(sizeof(**prop), 1);
+ n = calloc(sizeof(uint32_t), 1 + (max_rsa_size >> 5));
+ rr = calloc(sizeof(uint32_t), 1 + (max_rsa_size >> 5));
+ rrtmp = calloc(sizeof(uint32_t), 1 + (max_rsa_size >> 5));
+ if (!(*prop) || !n || !rr || !rrtmp) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = rsa_parse_pub_key(&rsa_key, key, keylen);
+ if (ret)
+ goto err;
+
+ /* modulus */
+ /* removing leading 0's */
+ for (i = 0; i < rsa_key.n_sz && !rsa_key.n[i]; i++)
+ ;
+ (*prop)->num_bits = (rsa_key.n_sz - i) * 8;
+ (*prop)->modulus = malloc(rsa_key.n_sz - i);
+ if (!(*prop)->modulus) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ memcpy((void *)(*prop)->modulus, &rsa_key.n[i], rsa_key.n_sz - i);
+
+ /* exponent */
+ (*prop)->public_exponent = calloc(1, sizeof(uint64_t));
+ if (!(*prop)->public_exponent) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ memcpy((void *)(*prop)->public_exponent + sizeof(uint64_t)
+ - rsa_key.e_sz,
+ rsa_key.e, rsa_key.e_sz);
+ (*prop)->exp_len = rsa_key.e_sz;
+
+ /* n0 inverse */
+ br_i32_decode(n, &rsa_key.n[i], rsa_key.n_sz - i);
+ (*prop)->n0inv = br_i32_ninv32(n[1]);
+
+ /* R^2 mod n; R = 2^(num_bits) */
+ rlen = (*prop)->num_bits * 2; /* #bits of R^2 = (2^num_bits)^2 */
+ rr[0] = 0;
+ *(uint8_t *)&rr[0] = (1 << (rlen % 8));
+ for (i = 1; i < (((rlen + 31) >> 5) + 1); i++)
+ rr[i] = 0;
+ br_i32_decode(rrtmp, rr, ((rlen + 7) >> 3) + 1);
+ br_i32_reduce(rr, rrtmp, n);
+
+ rlen = ((*prop)->num_bits + 7) >> 3; /* #bytes of R^2 mod n */
+ (*prop)->rr = malloc(rlen);
+ if (!(*prop)->rr) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ br_i32_encode((void *)(*prop)->rr, rlen, rr);
+
+ return 0;
+
+err:
+ free(n);
+ free(rr);
+ free(rrtmp);
+ rsa_free_key_prop(*prop);
+ return ret;
+}
--
2.24.0
More information about the U-Boot
mailing list