[PATCH 2/2] efi_selftest: add selftests for loadfile2 used to load initramfs
Ilias Apalodimas
ilias.apalodimas at linaro.org
Fri Feb 21 08:55:46 CET 2020
Provide a unit test loading an initial ramdisk using the
EFI_LOAD_FILE2_PROTOCOL. The test is only executed on request.
An example usage - given a file image with a file system in partition 1
holding file initrd - is:
* Configure the sandbox with
CONFIG_EFI_SELFTEST=y
CONFIG_EFI_LOAD_FILE2_INITRD=y
CONFIG_EFI_INITRD_FILESPEC="host 0:1 initrd"
* Run ./u-boot and execute
host bind 0 image
setenv efi_selftest load initrd
bootefi selftest
This would provide a test output like:
Testing EFI API implementation
Selected test: 'load initrd'
Setting up 'load initrd'
Setting up 'load initrd' succeeded
Executing 'load initrd'
Loaded 12378613 bytes
CRC32 2997478465
Executing 'load initrd' succeeded
Now the size and CRC32 can be compared to the provided file.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
---
lib/efi_selftest/Makefile | 1 +
lib/efi_selftest/efi_selftest_load_initrd.c | 220 ++++++++++++++++++++
2 files changed, 221 insertions(+)
create mode 100644 lib/efi_selftest/efi_selftest_load_initrd.c
diff --git a/lib/efi_selftest/Makefile b/lib/efi_selftest/Makefile
index 3ad96e1cbf08..cf132c372e17 100644
--- a/lib/efi_selftest/Makefile
+++ b/lib/efi_selftest/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_CPU_V7) += efi_selftest_unaligned.o
obj-$(CONFIG_EFI_LOADER_HII) += efi_selftest_hii.o
obj-$(CONFIG_EFI_RNG_PROTOCOL) += efi_selftest_rng.o
obj-$(CONFIG_EFI_GET_TIME) += efi_selftest_rtc.o
+obj-$(CONFIG_EFI_LOAD_FILE2_INITRD) += efi_selftest_load_initrd.o
ifeq ($(CONFIG_GENERATE_ACPI_TABLE),)
obj-y += efi_selftest_fdt.o
diff --git a/lib/efi_selftest/efi_selftest_load_initrd.c b/lib/efi_selftest/efi_selftest_load_initrd.c
new file mode 100644
index 000000000000..e16163caca85
--- /dev/null
+++ b/lib/efi_selftest/efi_selftest_load_initrd.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * efi_selftest_load_initrd
+ *
+ * Copyright (c) 2020 Ilias Apalodimas <ilias.apalodimas at linaro.org>
+ *
+ * This test checks the FileLoad2 protocol.
+ * A known file is read from the file system and verified.
+ *
+ * An example usage - given a file image with a file system in partition 1
+ * holding file initrd - is:
+ *
+ * * Configure the sandbox with
+ *
+ * CONFIG_EFI_SELFTEST=y
+ * CONFIG_EFI_LOAD_FILE2_INITRD=y
+ * CONFIG_EFI_INITRD_FILESPEC="host 0:1 initrd"
+ *
+ * * Run ./u-boot and execute
+ *
+ * host bind 0 image
+ * setenv efi_selftest load initrd
+ * bootefi selftest
+ *
+ * This would provide a test output like:
+ *
+ * Testing EFI API implementation
+ *
+ * Selected test: 'load initrd'
+ *
+ * Setting up 'load initrd'
+ * Setting up 'load initrd' succeeded
+ *
+ * Executing 'load initrd'
+ * Loaded 12378613 bytes
+ * CRC32 2997478465
+ *
+ * Now the size and CRC32 can be compared to the provided file.
+ */
+
+#include <efi_selftest.h>
+#include <efi_loader.h>
+#include <efi_load_initrd.h>
+
+static struct efi_boot_services *boottime;
+
+static struct efi_initrd_dp dp = {
+ .vendor = {
+ {
+ DEVICE_PATH_TYPE_MEDIA_DEVICE,
+ DEVICE_PATH_SUB_TYPE_VENDOR_PATH,
+ sizeof(dp.vendor),
+ },
+ EFI_INITRD_MEDIA_GUID,
+ },
+ .end = {
+ DEVICE_PATH_TYPE_END,
+ DEVICE_PATH_SUB_TYPE_END,
+ sizeof(dp.end),
+ }
+};
+
+static struct efi_initrd_dp dp_invalid = {
+ .vendor = {
+ {
+ DEVICE_PATH_TYPE_MEDIA_DEVICE,
+ DEVICE_PATH_SUB_TYPE_VENDOR_PATH,
+ sizeof(dp.vendor),
+ },
+ EFI_INITRD_MEDIA_GUID,
+ },
+ .end = {
+ 0x8f, /* invalid */
+ 0xfe, /* invalid */
+ sizeof(dp.end),
+ }
+};
+
+static int setup(const efi_handle_t handle,
+ const struct efi_system_table *systable)
+{
+ boottime = systable->boottime;
+
+ return EFI_ST_SUCCESS;
+}
+
+static int execute(void)
+{
+ efi_guid_t lf2_proto_guid = EFI_LOAD_FILE2_PROTOCOL_GUID;
+ struct efi_load_file_protocol *lf2;
+ struct efi_device_path *dp2, *dp2_invalid;
+ efi_status_t status;
+ efi_handle_t handle;
+ char buffer[64];
+ efi_uintn_t buffer_size;
+ void *buf;
+ u32 crc32;
+
+ memset(buffer, 0, sizeof(buffer));
+
+ dp2 = (struct efi_device_path *)&dp;
+ status = boottime->locate_device_path(&lf2_proto_guid, &dp2, &handle);
+ if (status != EFI_SUCCESS) {
+ efi_st_error("Unable to locate device path\n");
+ return EFI_ST_FAILURE;
+ }
+
+ status = boottime->handle_protocol(handle, &lf2_proto_guid,
+ (void **)&lf2);
+ if (status != EFI_SUCCESS) {
+ efi_st_error("Unable to locate protocol\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Case 1:
+ * buffer_size can't be NULL
+ * protocol can't be NULL
+ */
+ status = lf2->load_file(lf2, dp2, false, NULL, &buffer);
+ if (status != EFI_INVALID_PARAMETER) {
+ efi_st_error("Buffer size can't be NULL\n");
+ return EFI_ST_FAILURE;
+ }
+ buffer_size = sizeof(buffer);
+ status = lf2->load_file(NULL, dp2, false, &buffer_size, &buffer);
+ if (status != EFI_INVALID_PARAMETER) {
+ efi_st_error("Protocol can't be NULL\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /*
+ * Case 2: Match end node type/sub-type on device path
+ */
+ dp2_invalid = (struct efi_device_path *)&dp_invalid;
+ buffer_size = sizeof(buffer);
+ status = lf2->load_file(lf2, dp2_invalid, false, &buffer_size, &buffer);
+ if (status != EFI_INVALID_PARAMETER) {
+ efi_st_error("Invalid device path type must return EFI_INVALID_PARAMETER\n");
+ return EFI_ST_FAILURE;
+ }
+
+ status = lf2->load_file(lf2, dp2_invalid, false, &buffer_size, &buffer);
+ if (status != EFI_INVALID_PARAMETER) {
+ efi_st_error("Invalid device path sub-type must return EFI_INVALID_PARAMETER\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /*
+ * Case 3:
+ * BootPolicy 'true' must return EFI_UNSUPPORTED
+ */
+ buffer_size = sizeof(buffer);
+ status = lf2->load_file(lf2, dp2, true, &buffer_size, &buffer);
+ if (status != EFI_UNSUPPORTED) {
+ efi_st_error("BootPolicy true must return EFI_UNSUPPORTED\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /*
+ * Case: Pass buffer size as zero, firmware must return
+ * EFI_BUFFER_TOO_SMALL and an appropriate size
+ */
+ buffer_size = 0;
+ status = lf2->load_file(lf2, dp2, false, &buffer_size, NULL);
+ if (status != EFI_BUFFER_TOO_SMALL || !buffer_size) {
+ efi_st_printf("buffer_size: %u\n", (unsigned int)buffer_size);
+ efi_st_printf("status: %x\n", (unsigned int)status);
+ efi_st_error("Buffer size not updated\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /*
+ * Case: Pass buffer size as smaller than the file_size,
+ * firmware must return * EFI_BUFFER_TOO_SMALL and an appropriate size
+ */
+ buffer_size = 1;
+ status = lf2->load_file(lf2, dp2, false, &buffer_size, &buffer);
+ if (status != EFI_BUFFER_TOO_SMALL || buffer_size <= 1) {
+ efi_st_error("Buffer size not updated\n");
+ return EFI_ST_FAILURE;
+ }
+
+ status = boottime->allocate_pool(EFI_BOOT_SERVICES_DATA, buffer_size,
+ &buf);
+ if (status != EFI_SUCCESS) {
+ efi_st_error("Cannot allocate buffer\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Case: Pass correct buffer, load the file and verify checksum*/
+ status = lf2->load_file(lf2, dp2, false, &buffer_size, buf);
+ if (status != EFI_SUCCESS) {
+ efi_st_error("Loading initrd failed\n");
+ return EFI_ST_FAILURE;
+ }
+
+ efi_st_printf("Loaded %u bytes\n", (unsigned int)buffer_size);
+ status = boottime->calculate_crc32(buf, buffer_size, &crc32);
+ if (status != EFI_SUCCESS) {
+ efi_st_error("Could not determine CRC32\n");
+ return EFI_ST_FAILURE;
+ }
+ efi_st_printf("CRC32 %u\n", (unsigned int)crc32);
+
+ status = boottime->free_pool(buf);
+ if (status != EFI_SUCCESS) {
+ efi_st_error("Cannot free buffer\n");
+ return EFI_ST_FAILURE;
+ }
+
+ return EFI_ST_SUCCESS;
+}
+
+EFI_UNIT_TEST(load_initrd) = {
+ .name = "load initrd",
+ .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
+ .setup = setup,
+ .execute = execute,
+ .on_request = true,
+};
--
2.25.1
More information about the U-Boot
mailing list