[RFC PATCH 00/10] arm: add support for SoC S5P4418

[Amit Tomer]

Hi,

On Tue, Feb 4, 2020 at 1:12 AM Stefan Bosch <stefan_b at posteo.net> wrote:
>
>
> This patch adds support for SAMSUNG's/NEXELL's ARM Cortex-A9 based
> S5P4418 SoC, especially FriendlyARM's NanoPi2 and NanoPC-T2 boards.
> It is based on the following FriendlyARM's U-Boot version:
> https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01.
>
I don't think this is the right approach, i.e. to take everything from
BSP source as it is and put
it into mainline U-BOOT. AFAIR,  Some of the peripherals present on
these NEXELL SoC's are
compatible with SAMSUNG IP (for instance the UART).
So, are we sure that some of the already existing code in U-BOOT can't
be re-used to drive those
compatible peripherals at-least ?

Thanks
-Amit