[PATCH v3 08/21] actions: s900: add u-boot specific dts file

[Manivannan Sadhasivam]

On Sat, Jan 25, 2020 at 05:52:50PM +0530, Amit Singh Tomar wrote:
> Devices like uart and clk are needed to be enabled before relocation.
> This patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.
> 
> Signed-off-by: Amit Singh Tomar <amittomer25 at gmail.com>
> ---

Patch subject should mention dtsi not dts and also the prefix should be
arm: dts. With that,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>

Thanks,
Mani

> Changes since v2:
> 	* Newly added patch, not there in v2/v1.
> ---
>  arch/arm/dts/s900-u-boot.dtsi | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>  create mode 100644 arch/arm/dts/s900-u-boot.dtsi
> 
> diff --git a/arch/arm/dts/s900-u-boot.dtsi b/arch/arm/dts/s900-u-boot.dtsi
> new file mode 100644
> index 0000000..a95f2cc
> --- /dev/null
> +++ b/arch/arm/dts/s900-u-boot.dtsi
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + */
> +
> +/{
> +	soc {
> +		u-boot,dm-pre-reloc;

Ignore my comment about this change in previous patch.

> +	};
> +};
> +
> +&uart5 {
> +	u-boot,dm-pre-reloc;
> +};
> +
> +&cmu {
> +	u-boot,dm-pre-reloc;
> +};
> -- 
> 2.7.4
>