[PATCH v4 00/14] RISC-V SiFive FU540 support SPL
Pragnesh Patel
pragnesh.patel at sifive.com
Mon Feb 24 09:32:32 CET 2020
This series add support for SPL to FU540.U-Boot SPL can boot from
L2 LIM (0x0800_0000) and jump to OpenSBI(FW_DYNAMIC firmware) and
U-Boot proper from MMC devices.
How to test this patch:
1) Go to OpenSBI-dir : make PLATFORM=sifive/fu540 O=build_dir I=install_dir FW_DYNAMIC=y install
2) cp install_dir/platform/sifive/fu540/firmware/fw_dynamic.bin <u-boot-dir>/
3) Change to u-boot-dir
4) make sifive_fu540_defconfig
5) make all
6) ZSBL loads the U-boot SPL(u-boot-spl.bin) from a partition with
GUID type 5B193300-FC78-40CD-8002-E86C45580B47
sudo dd if=spl/u-boot-spl.bin of=/dev/sdc4 bs=1M
7) U-boot SPL expects a u-boot FIT image(u-boot.itb) from 1st partition(/dev/sdc1)
of SD card irrespective of GUID
sudo dd if=u-boot.itb of=/dev/sdc1 bs=1M
Thanks to Yash Shah <yash.shah at sifive.com> for testing the series.
Changes in v4:
- Split misc DM driver patch into multiple patches
- Added new SPL_CRC7_SUPPORT Kconfig option
- Added DM driver for DDR
- Added clk_enable and clk_disable ops in SiFive PRCI driver
- Added early clock initialization for SPL in SiFive PRCI driver
- Added SPL config options in sifive_fu540_defconfig instead of
creatiing a new config file for SPL
- Update fu540.rst on how to build and flash U-boot SPL
Changes in v3:
- Remove arch-fu540 and arch-sifive from arch/riscv/include/asm/
- Split SPL patches into DDR and SPL and spl defconfig
- Update fu540/MAINTAINERS file
- Update fu540.rst on how to build and flash U-boot SPL
Changes in v2:
- Add DM driver Sifive OTP
- Split SPL patches into multiple patches
- Add a seprate patch for _image_binary_end and crc7.c
- Add a seprate patch to add board -u-boot.dtsi files
- Update FU540 RISC-V documentation
Pragnesh Patel (14):
misc: add driver for the SiFive otp controller
riscv: sifive: fu540: Use OTP DM driver for serial environment
variable
riscv: Add _image_binary_end for SPL
lib: Makefile: build crc7.c when CONFIG_MMC_SPI
riscv: sifive: dts: fu540: Add board -u-boot.dtsi files
sifive: fu540: add ddr driver
sifive: dts: fu540: Add DDR controller and phy register settings
clk: sifive: fu540-prci: Add clock enable and disable ops
clk: sifive: fu540-prci: Add clock initialization for SPL
riscv: sifive: fu540: add SPL configuration
configs: fu540: Add config options for U-boot SPL
riscv: sifive: fu540: enable all cache ways from u-boot proper
sifive: fix palmer's email address
doc: update FU540 RISC-V documentation
arch/riscv/cpu/u-boot-spl.lds | 1 +
arch/riscv/dts/fu540-c000-u-boot.dtsi | 63 +
arch/riscv/dts/fu540-sdram-lpddr4.dtsi | 1489 +++++++++++++++++
.../dts/hifive-unleashed-a00-u-boot.dtsi | 23 +
board/sifive/fu540/Kconfig | 10 +
board/sifive/fu540/MAINTAINERS | 2 +-
board/sifive/fu540/Makefile | 5 +
board/sifive/fu540/cache.c | 20 +
board/sifive/fu540/cache.h | 13 +
board/sifive/fu540/fu540-memory-map.h | 33 +
board/sifive/fu540/fu540.c | 139 +-
board/sifive/fu540/spl.c | 78 +
board/sifive/fu540/ux00prci.h | 56 +
common/spl/Kconfig | 7 +
configs/sifive_fu540_defconfig | 11 +
doc/board/sifive/fu540.rst | 409 ++++-
drivers/clk/sifive/fu540-prci.c | 169 +-
drivers/misc/Kconfig | 7 +
drivers/misc/Makefile | 1 +
drivers/misc/sifive-otp.c | 241 +++
drivers/ram/Kconfig | 7 +
drivers/ram/Makefile | 2 +
drivers/ram/sifive/Kconfig | 8 +
drivers/ram/sifive/Makefile | 6 +
drivers/ram/sifive/sdram_fu540.c | 295 ++++
drivers/ram/sifive/sdram_fu540.h | 94 ++
include/configs/sifive-fu540.h | 18 +
lib/Makefile | 1 +
28 files changed, 3107 insertions(+), 101 deletions(-)
create mode 100644 arch/riscv/dts/fu540-c000-u-boot.dtsi
create mode 100644 arch/riscv/dts/fu540-sdram-lpddr4.dtsi
create mode 100644 arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
create mode 100644 board/sifive/fu540/cache.c
create mode 100644 board/sifive/fu540/cache.h
create mode 100644 board/sifive/fu540/fu540-memory-map.h
create mode 100644 board/sifive/fu540/spl.c
create mode 100644 board/sifive/fu540/ux00prci.h
create mode 100644 drivers/misc/sifive-otp.c
create mode 100644 drivers/ram/sifive/Kconfig
create mode 100644 drivers/ram/sifive/Makefile
create mode 100644 drivers/ram/sifive/sdram_fu540.c
create mode 100644 drivers/ram/sifive/sdram_fu540.h
--
2.17.1
More information about the U-Boot
mailing list