[PATCH v4 01/14] misc: add driver for the SiFive otp controller

Patrick DELAUNAY patrick.delaunay at st.com
Mon Feb 24 19:04:09 CET 2020 

Hi,

> From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Pragnesh Patel
> Sent: lundi 24 février 2020 09:33
> 
> Added a misc driver to handle OTP memory in SiFive SoCs.
> 
> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
> ---
>  drivers/misc/Kconfig      |   7 ++
>  drivers/misc/Makefile     |   1 +
>  drivers/misc/sifive-otp.c | 241 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 249 insertions(+)
>  create mode 100644 drivers/misc/sifive-otp.c
> 
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index
> f18aa8f7ba..fcb45c63d4 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -68,6 +68,13 @@ config ROCKCHIP_OTP
>  	  addressing and a length or through child-nodes that are generated
>  	  based on the e-fuse map retrieved from the DTS.
> 
> +config SIFIVE_OTP
> +	bool "SiFive Ememory OTP driver"
> +	depends on RISCV && MISC
> +	help
> +	  Enable support for reading and writing the ememory OTP on the
> +	  SiFive SoCs.
> +
>  config VEXPRESS_CONFIG
>  	bool "Enable support for Arm Versatile Express config bus"
>  	depends on MISC
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index
> 2b843de93c..ee888631b6 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -58,6 +58,7 @@ obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o
>  obj-$(CONFIG_QFW) += qfw.o
>  obj-$(CONFIG_ROCKCHIP_EFUSE) += rockchip-efuse.o
>  obj-$(CONFIG_ROCKCHIP_OTP) += rockchip-otp.o
> +obj-$(CONFIG_SIFIVE_OTP) += sifive-otp.o
>  obj-$(CONFIG_SANDBOX) += syscon_sandbox.o misc_sandbox.o
>  obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o
>  obj-$(CONFIG_SMSC_SIO1007) += smsc_sio1007.o diff --git
> a/drivers/misc/sifive-otp.c b/drivers/misc/sifive-otp.c new file mode 100644 index
> 0000000000..6a39ec42df
> --- /dev/null
> +++ b/drivers/misc/sifive-otp.c
> @@ -0,0 +1,241 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * This is a driver for the eMemory EG004K32TQ028XW01 NeoFuse
> + * One-Time-Programmable (OTP) memory used within the SiFive FU540.
> + * It is documented in the FU540 manual here:
> + * https://www.sifive.com/documentation/chips/freedom-u540-c000-manual/
> + *
> + * Copyright (C) 2018 Philipp Hug <philipp at hug.cx>
> + * Copyright (C) 2018 Joey Hewitt <joey at joeyhewitt.com>
> + *
> + * Copyright (C) 2020 SiFive, Inc
> + */
> +
> +/*
> + * The FU540 stores 4096x32 bit (16KiB) values.
> + * Index 0x00-0xff are reserved for SiFive internal use. (first 1KiB)
> + * Right now first 1KB is used to store only serial number.
> + */
> +
> +#include <common.h>
> +#include <dm/device.h>
> +#include <dm/read.h>
> +#include <linux/io.h>
> +#include <misc.h>
> +
> +#define BYTES_PER_FUSE		4
> +
> +#define PA_RESET_VAL		0x00
> +#define PAS_RESET_VAL		0x00
> +#define PAIO_RESET_VAL		0x00
> +#define PDIN_RESET_VAL		0x00
> +#define PTM_RESET_VAL		0x00
> +
> +#define PCLK_ENABLE_VAL			BIT(0)
> +#define PCLK_DISABLE_VAL		0x00
> +
> +#define PWE_WRITE_ENABLE		BIT(0)
> +#define PWE_WRITE_DISABLE		0x00
> +
> +#define PTM_FUSE_PROGRAM_VAL		BIT(1)
> +
> +#define PCE_ENABLE_INPUT		BIT(0)
> +#define PCE_DISABLE_INPUT		0x00
> +
> +#define PPROG_ENABLE_INPUT		BIT(0)
> +#define PPROG_DISABLE_INPUT		0x00
> +
> +#define PTRIM_ENABLE_INPUT		BIT(0)
> +#define PTRIM_DISABLE_INPUT		0x00
> +
> +#define PDSTB_DEEP_STANDBY_ENABLE	BIT(0)
> +#define PDSTB_DEEP_STANDBY_DISABLE	0x00
> +
> +struct sifive_otp_regs {
> +	u32 pa;     /* Address input */
> +	u32 paio;   /* Program address input */
> +	u32 pas;    /* Program redundancy cell selection input */
> +	u32 pce;    /* OTP Macro enable input */
> +	u32 pclk;   /* Clock input */
> +	u32 pdin;   /* Write data input */
> +	u32 pdout;  /* Read data output */
> +	u32 pdstb;  /* Deep standby mode enable input (active low) */
> +	u32 pprog;  /* Program mode enable input */
> +	u32 ptc;    /* Test column enable input */
> +	u32 ptm;    /* Test mode enable input */
> +	u32 ptm_rep;/* Repair function test mode enable input */
> +	u32 ptr;    /* Test row enable input */
> +	u32 ptrim;  /* Repair function enable input */
> +	u32 pwe;    /* Write enable input (defines program cycle) */
> +} __packed;
> +
> +struct sifive_otp_platdata {
> +	struct sifive_otp_regs __iomem *regs;
> +	u32 total_fuses;
> +};
> +
> +/*
> + * offset and size are assumed aligned to the size of the fuses (32bit).
> + */
> +static int sifive_otp_read(struct udevice *dev, int offset,
> +			   void *buf, int size)
> +{
> +	struct sifive_otp_platdata *plat = dev_get_platdata(dev);
> +	struct sifive_otp_regs *regs = (struct sifive_otp_regs *)plat->regs;
> +
> +	int fuseidx = offset / BYTES_PER_FUSE;
> +	int fusecount = size / BYTES_PER_FUSE;
> +	u32 fusebuf[fusecount];
> +
> +	/* check bounds */
> +	if (offset < 0 || size < 0)
> +		return -EINVAL;
> +	if (fuseidx >= plat->total_fuses)
> +		return -EINVAL;
> +	if ((fuseidx + fusecount) > plat->total_fuses)
> +		return -EINVAL;
> +
> +	/* init OTP */
> +	iowrite32(PDSTB_DEEP_STANDBY_ENABLE, &regs->pdstb);
> +	iowrite32(PTRIM_ENABLE_INPUT, &regs->ptrim);
> +	iowrite32(PCE_ENABLE_INPUT, &regs->pce);
> +
> +	/* read all requested fuses */
> +	for (unsigned int i = 0; i < fusecount; i++, fuseidx++) {
> +		iowrite32(fuseidx, &regs->pa);
> +
> +		/* cycle clock to read */
> +		iowrite32(PCLK_ENABLE_VAL, &regs->pclk);
> +		mdelay(1);
> +		iowrite32(PCLK_DISABLE_VAL, &regs->pclk);
> +		mdelay(1);
> +
> +		/* read the value */
> +		fusebuf[i] = ioread32(&regs->pdout);
> +	}
> +
> +	/* shut down */
> +	iowrite32(PCE_DISABLE_INPUT, &regs->pce);
> +	iowrite32(PTRIM_DISABLE_INPUT, &regs->ptrim);
> +	iowrite32(PDSTB_DEEP_STANDBY_DISABLE, &regs->pdstb);
> +
> +	// copy out
> +	memcpy(buf, fusebuf, size);
> +
> +	return 0;

Since the commit 8729b1ae2cbd ("misc: Update read() and write()  methods to return bytes xfered")

	return  size;

> +}
> +
> +/*
> + * Caution:
> + * OTP can be written only once, so use carefully.
> + *
> + * offset and size are assumed aligned to the size of the fuses (32bit).
> + */
> +static int sifive_otp_write(struct udevice *dev, int offset,
> +			    const void *buf, int size)
> +{
> +	struct sifive_otp_platdata *plat = dev_get_platdata(dev);
> +	struct sifive_otp_regs *regs = (struct sifive_otp_regs *)plat->regs;
> +
> +	int fuseidx = offset / BYTES_PER_FUSE;
> +	int fusecount = size / BYTES_PER_FUSE;
> +	u32 *write_buf = (u32 *)buf;
> +	u32 write_data;
> +	int i, pas, bit;
> +
> +	/* check bounds */
> +	if (offset < 0 || size < 0)
> +		return -EINVAL;
> +	if (fuseidx >= plat->total_fuses)
> +		return -EINVAL;
> +	if ((fuseidx + fusecount) > plat->total_fuses)
> +		return -EINVAL;
> +
> +	/* init OTP */
> +	iowrite32(PDSTB_DEEP_STANDBY_ENABLE, &regs->pdstb);
> +	iowrite32(PTRIM_ENABLE_INPUT, &regs->ptrim);
> +
> +	/* reset registers */
> +	iowrite32(PCLK_DISABLE_VAL, &regs->pclk);
> +	iowrite32(PA_RESET_VAL, &regs->pa);
> +	iowrite32(PAS_RESET_VAL, &regs->pas);
> +	iowrite32(PAIO_RESET_VAL, &regs->paio);
> +	iowrite32(PDIN_RESET_VAL, &regs->pdin);
> +	iowrite32(PWE_WRITE_DISABLE, &regs->pwe);
> +	iowrite32(PTM_FUSE_PROGRAM_VAL, &regs->ptm);
> +	mdelay(1);
> +
> +	iowrite32(PCE_ENABLE_INPUT, &regs->pce);
> +	iowrite32(PPROG_ENABLE_INPUT, &regs->pprog);
> +	iowrite32(PTRIM_ENABLE_INPUT, &regs->ptrim);
> +
> +	/* write all requested fuses */
> +	for (i = 0; i < fusecount; i++, fuseidx++) {
> +		iowrite32(fuseidx, &regs->pa);
> +		write_data = *(write_buf++);
> +
> +		for (pas = 0; pas < 2; pas++) {
> +			iowrite32(pas, &regs->pas);
> +
> +			for (bit = 0; bit < 32; bit++) {
> +				iowrite32(bit, &regs->paio);
> +				iowrite32(((write_data >> bit) & 1),
> +					  &regs->pdin);
> +				mdelay(1);
> +
> +				iowrite32(PWE_WRITE_ENABLE, &regs->pwe);
> +				mdelay(1);
> +				iowrite32(PWE_WRITE_DISABLE, &regs->pwe);
> +				mdelay(1);
> +			}
> +		}
> +
> +		iowrite32(PAS_RESET_VAL, &regs->pas);
> +	}
> +
> +	/* shut down */
> +	iowrite32(PWE_WRITE_DISABLE, &regs->pwe);
> +	iowrite32(PPROG_DISABLE_INPUT, &regs->pprog);
> +	iowrite32(PCE_DISABLE_INPUT, &regs->pce);
> +	iowrite32(PTM_RESET_VAL, &regs->ptm);
> +
> +	iowrite32(PTRIM_DISABLE_INPUT, &regs->ptrim);
> +	iowrite32(PDSTB_DEEP_STANDBY_DISABLE, &regs->pdstb);
> +
> +	return 0;

Since the commit 8729b1ae2cbd ("misc: Update read() and write()  methods to return bytes xfered")

	return  size;

> +}
> +
> +static int sifive_otp_ofdata_to_platdata(struct udevice *dev) {
> +	struct sifive_otp_platdata *plat = dev_get_platdata(dev);
> +	int ret;
> +
> +	plat->regs = dev_read_addr_ptr(dev);
> +
> +	ret = dev_read_u32(dev, "fuse-count", &plat->total_fuses);
> +	if (ret < 0) {
> +		pr_err("\"fuse-count\" not found\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct misc_ops sifive_otp_ops = {
> +	.read = sifive_otp_read,
> +	.write = sifive_otp_write,
> +};
> +
> +static const struct udevice_id sifive_otp_ids[] = {
> +	{ .compatible = "sifive,fu540-otp" },
> +	{}
> +};
> +
> +U_BOOT_DRIVER(sifive_otp) = {
> +	.name = "sifive_otp",
> +	.id = UCLASS_MISC,
> +	.of_match = sifive_otp_ids,
> +	.ofdata_to_platdata = sifive_otp_ofdata_to_platdata,
> +	.platdata_auto_alloc_size = sizeof(struct sifive_otp_platdata),
> +	.ops = &sifive_otp_ops,
> +};
> --
> 2.17.1

Regards

Patrick

More information about the U-Boot mailing list