[PATCH 2/2] board: sama5d3_xplained: Fix uboot size when loaded from NAND by SPL

[Eugen Hristev]

From: Fabien Lehoussel <fabien.lehoussel at medianesysteme.com>

Uboot size is incorrect.
Uboot SPL use CONFIG_SYS_MONITOR_LEN to read uboot from NAND : 0x80000
With sama5d3_xplained_nandflash_defconfig : u-boot.bin size is ~800Ko 0xC0000

So I increased size to 1MB : 0x100000

Signed-off-by: Fabien Lehoussel <fabien.lehoussel at medianesysteme.com>
---
 include/configs/sama5d3_xplained.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 696933da73..42c14007c0 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -9,6 +9,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/sizes.h>
 #include "at91-sama5_common.h"
 
 /*
@@ -64,7 +65,8 @@
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
+/* size of u-boot.bin to load */
+#define CONFIG_SYS_MONITOR_LEN		(2 * SZ_512K)
 
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
-- 
2.20.1