[PATCH 3/3] ARM: uniphier: detect the base of micro support card at run-time
Masahiro Yamada
masahiroy at kernel.org
Thu Feb 27 18:44:21 CET 2020
On Fri, Feb 14, 2020 at 8:55 PM Masahiro Yamada
<yamada.masahiro at socionext.com> wrote:
>
> The base address 0x43f00000 is no longer true for the future SoC.
> Extract the base address from the device tree.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
> ---
Applied to u-boot-uniphier.
> arch/arm/mach-uniphier/micro-support-card.c | 43 +++++++++++++++------
> 1 file changed, 31 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/mach-uniphier/micro-support-card.c b/arch/arm/mach-uniphier/micro-support-card.c
> index 46879019fdaa..c71470a20429 100644
> --- a/arch/arm/mach-uniphier/micro-support-card.c
> +++ b/arch/arm/mach-uniphier/micro-support-card.c
> @@ -1,39 +1,58 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> * Copyright (C) 2012-2015 Panasonic Corporation
> - * Copyright (C) 2015-2016 Socionext Inc.
> + * Copyright (C) 2015-2020 Socionext Inc.
> * Author: Masahiro Yamada <yamada.masahiro at socionext.com>
> */
>
> #include <common.h>
> +#include <dm/of.h>
> +#include <fdt_support.h>
> #include <linux/ctype.h>
> #include <linux/io.h>
>
> #include "micro-support-card.h"
>
> -#define MICRO_SUPPORT_CARD_BASE 0x43f00000
> -#define SMC911X_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x00000)
> -#define LED_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x90000)
> -#define NS16550A_BASE ((MICRO_SUPPORT_CARD_BASE) + 0xb0000)
> -#define MICRO_SUPPORT_CARD_RESET ((MICRO_SUPPORT_CARD_BASE) + 0xd0034)
> -#define MICRO_SUPPORT_CARD_REVISION ((MICRO_SUPPORT_CARD_BASE) + 0xd00E0)
> +#define SMC911X_OFFSET 0x00000
> +#define LED_OFFSET 0x90000
> +#define NS16550A_OFFSET 0xb0000
> +#define MICRO_SUPPORT_CARD_RESET 0xd0034
> +#define MICRO_SUPPORT_CARD_REVISION 0xd00e0
>
> static bool support_card_found;
> +static void __iomem *support_card_base;
>
> static void support_card_detect(void)
> {
> DECLARE_GLOBAL_DATA_PTR;
> const void *fdt = gd->fdt_blob;
> int offset;
> + u64 addr, addr2;
>
> offset = fdt_node_offset_by_compatible(fdt, 0, "smsc,lan9118");
> if (offset < 0)
> return;
>
> + addr = fdt_get_base_address(fdt, offset);
> + if (addr == OF_BAD_ADDR)
> + return;
> + addr -= SMC911X_OFFSET;
> +
> offset = fdt_node_offset_by_compatible(fdt, 0, "ns16550a");
> if (offset < 0)
> return;
>
> + addr2 = fdt_get_base_address(fdt, offset);
> + if (addr2 == OF_BAD_ADDR)
> + return;
> + addr2 -= NS16550A_OFFSET;
> +
> + /* sanity check */
> + if (addr != addr2)
> + return;
> +
> + support_card_base = ioremap(addr, 0x100000);
> +
> support_card_found = true;
> }
>
> @@ -45,19 +64,19 @@ static void support_card_detect(void)
> */
> static void support_card_reset_deassert(void)
> {
> - writel(0x00010000, MICRO_SUPPORT_CARD_RESET);
> + writel(0x00010000, support_card_base + MICRO_SUPPORT_CARD_RESET);
> }
>
> static void support_card_reset(void)
> {
> - writel(0x00020003, MICRO_SUPPORT_CARD_RESET);
> + writel(0x00020003, support_card_base + MICRO_SUPPORT_CARD_RESET);
> }
>
> static int support_card_show_revision(void)
> {
> u32 revision;
>
> - revision = readl(MICRO_SUPPORT_CARD_REVISION);
> + revision = readl(support_card_base + MICRO_SUPPORT_CARD_REVISION);
> revision &= 0xff;
>
> /* revision 3.6.x card changed the revision format */
> @@ -94,7 +113,7 @@ int board_eth_init(bd_t *bis)
> if (!support_card_found)
> return 0;
>
> - return smc911x_initialize(0, SMC911X_BASE);
> + return smc911x_initialize(0, (unsigned long)support_card_base + SMC911X_OFFSET);
> }
> #endif
>
> @@ -264,5 +283,5 @@ void led_puts(const char *s)
> s++;
> }
>
> - writel(~val, LED_BASE);
> + writel(~val, support_card_base + LED_OFFSET);
> }
> --
> 2.17.1
>
--
Best Regards
Masahiro Yamada
More information about the U-Boot
mailing list