[PATCH] mtd: nand: Fix on-die ecc issues in arasan_nfc driver

[Michal Simek]

po 20. 1. 2020 v 9:48 odesílatel Michal Simek <michal.simek at xilinx.com> napsal:
>
> From: T Karthik Reddy <t.karthik.reddy at xilinx.com>
>
> Fixed wrong enumeration of nand_config structure. Added chip select
> function before reading the nand chip for maf/dev id's, without this
> unable to access id's from some of the micron chips. Also added a
> print statement to identify if a nand flash is using on-die ecc.
>
> Signed-off-by: T Karthik Reddy <t.karthik.reddy at xilinx.com>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
>  drivers/mtd/nand/raw/arasan_nfc.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/arasan_nfc.c b/drivers/mtd/nand/raw/arasan_nfc.c
> index d1b1a4263a2e..110c32b39616 100644
> --- a/drivers/mtd/nand/raw/arasan_nfc.c
> +++ b/drivers/mtd/nand/raw/arasan_nfc.c
> @@ -1120,12 +1120,15 @@ static void arasan_nand_cmd_function(struct mtd_info *mtd, unsigned int command,
>  static void arasan_check_ondie(struct mtd_info *mtd)
>  {
>         struct nand_chip *nand_chip = mtd_to_nand(mtd);
> -       struct nand_config *nand = nand_get_controller_data(nand_chip);
> +       struct nand_drv *info = nand_get_controller_data(nand_chip);
> +       struct nand_config *nand = &info->config;
>         u8 maf_id, dev_id;
>         u8 get_feature[4];
>         u8 set_feature[4] = {ENABLE_ONDIE_ECC, 0x00, 0x00, 0x00};
>         u32 i;
>
> +       nand_chip->select_chip(mtd, 0);
> +
>         /* Send the command for reading device ID */
>         nand_chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
>         nand_chip->cmdfunc(mtd, NAND_CMD_READID, 0, -1);
> @@ -1150,10 +1153,12 @@ static void arasan_check_ondie(struct mtd_info *mtd)
>                 for (i = 0; i < 4; i++)
>                         get_feature[i] = nand_chip->read_byte(mtd);
>
> -               if (get_feature[0] & ENABLE_ONDIE_ECC)
> +               if (get_feature[0] & ENABLE_ONDIE_ECC) {
>                         nand->on_die_ecc_enabled = true;
> -               else
> +                       printf("On-DIE ECC Enabled\n");
> +               } else {
>                         printf("%s: Unable to enable OnDie ECC\n", __func__);
> +               }
>
>                 /* Use the BBT pattern descriptors */
>                 nand_chip->bbt_td = &bbt_main_descr;
> --
> 2.25.0
>

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs