[PATCH 1/1] doc: fix references to driver-model

[Patrick DELAUNAY]

Hi Heinrich

> From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Heinrich Schuchardt
> Sent: mardi 25 février 2020 21:36
> 
> Fix some errors pointed out by 'make refcheckdocs'.
> 
> Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
> ---

I found also the same issue in 

-------------------------------- doc/README.SPL --------------------------------
index 4e3478a13a..929b9672b0 100644
@@ -81,7 +81,7 @@ fdtgrep is also used to remove:
   ('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl')
 
 All the nodes remaining in the SPL devicetree are bound
-(see driver-model/README.txt).
+(see driver-model/design.rst).
 
 Debugging
 ---------

>  doc/README.drivers.eth     | 2 +-
>  doc/README.fdt-control     | 2 +-
>  drivers/i2c/davinci_i2c.c  | 2 +-
>  drivers/i2c/kona_i2c.c     | 2 +-
>  drivers/i2c/sh_i2c.c       | 2 +-
>  drivers/i2c/soft_i2c.c     | 2 +-
>  tools/dtoc/dtb_platdata.py | 4 ++--
>  tools/dtoc/dtoc.py         | 2 +-
>  8 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/doc/README.drivers.eth b/doc/README.drivers.eth index
> 1a9a23b51b..acaf11fea3 100644
> --- a/doc/README.drivers.eth
> +++ b/doc/README.drivers.eth
> @@ -2,7 +2,7 @@
> 
>  This guide describes to the old way of doing things. No new Ethernet drivers
> should be implemented this way. All new drivers should be written against the -U-
> Boot core driver model. See doc/driver-model/README.txt
> +U-Boot core driver model. See doc/driver-model/index.rst.

index.rst or design.rst  as in the next file ?

doc/driver-model/README.txt is replaced by design.rst  in commit ed205e677b6f
('doc: driver-model: Convert README.txt to rest')

>  -----------------------
>   Ethernet Driver Guide
> diff --git a/doc/README.fdt-control b/doc/README.fdt-control index
> e53cf51875..424d13fc5b 100644
> --- a/doc/README.fdt-control
> +++ b/doc/README.fdt-control
> @@ -182,7 +182,7 @@ U-Boot can be divided into three phases: TPL, SPL and U-
> Boot proper.
> 
>  The full device tree is available to U-Boot proper, but normally only a subset  (or
> none at all) is available to TPL and SPL. See 'Pre-Relocation Support' and -'SPL
> Support' in doc/driver-model/README.txt for more details.
> +'SPL Support' in doc/driver-model/design.rst for more details.
> 
> 
>  Using several DTBs in the SPL (CONFIG_SPL_MULTI_DTB) diff --git
> a/drivers/i2c/davinci_i2c.c b/drivers/i2c/davinci_i2c.c index
> 2c77234c60..edc40f706c 100644
> --- a/drivers/i2c/davinci_i2c.c
> +++ b/drivers/i2c/davinci_i2c.c
> @@ -8,7 +8,7 @@
>   * --------------------------------------------------------
>   *
>   * NOTE: This driver should be converted to driver model before June 2017.
> - * Please see doc/driver-model/i2c-howto.txt for instructions.
> + * Please see doc/driver-model/i2c-howto.rst for instructions.
>   */
> 
>  #include <common.h>
> diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c index
> 0726b4c956..8e31481c0f 100644
> --- a/drivers/i2c/kona_i2c.c
> +++ b/drivers/i2c/kona_i2c.c
> @@ -3,7 +3,7 @@
>   * Copyright 2013 Broadcom Corporation.
>   *
>   * NOTE: This driver should be converted to driver model before June 2017.
> - * Please see doc/driver-model/i2c-howto.txt for instructions.
> + * Please see doc/driver-model/i2c-howto.rst for instructions.
>   */
> 
>  #include <common.h>
> diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c index b69d213593..834f1f2179
> 100644
> --- a/drivers/i2c/sh_i2c.c
> +++ b/drivers/i2c/sh_i2c.c
> @@ -4,7 +4,7 @@
>   * Copyright (C) 2011, 2013 Nobuhiro Iwamatsu
> <nobuhiro.iwamatsu.yj at renesas.com>
>   *
>   * NOTE: This driver should be converted to driver model before June 2017.
> - * Please see doc/driver-model/i2c-howto.txt for instructions.
> + * Please see doc/driver-model/i2c-howto.rst for instructions.
>   */
> 
>  #include <common.h>
> diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index
> 7f0303cc05..9ad1c281ff 100644
> --- a/drivers/i2c/soft_i2c.c
> +++ b/drivers/i2c/soft_i2c.c
> @@ -12,7 +12,7 @@
>   * Neil Russell.
>   *
>   * NOTE: This driver should be converted to driver model before June 2017.
> - * Please see doc/driver-model/i2c-howto.txt for instructions.
> + * Please see doc/driver-model/i2c-howto.rst for instructions.
>   */
> 
>  #include <common.h>
> diff --git a/tools/dtoc/dtb_platdata.py b/tools/dtoc/dtb_platdata.py index
> 037e82c8bb..90a9e1a626 100644
> --- a/tools/dtoc/dtb_platdata.py
> +++ b/tools/dtoc/dtb_platdata.py
> @@ -423,7 +423,7 @@ class DtbPlatdata(object):
> 
>          This writes out the body of a header file consisting of structure
>          definitions for node in self._valid_nodes. See the documentation in
> -        README.of-plat for more information.
> +        doc/driver-model/of-plat.rst for more information.
>          """
>          self.out_header()
>          self.out('#include <stdbool.h>\n') @@ -527,7 +527,7 @@ class
> DtbPlatdata(object):
>          U_BOOT_DEVICE() declarations for each valid node. Where a node has
>          multiple compatible strings, a #define is used to make them equivalent.
> 
> -        See the documentation in doc/driver-model/of-plat.txt for more
> +        See the documentation in doc/driver-model/of-plat.rst for more
>          information.
>          """
>          self.out_header()
> diff --git a/tools/dtoc/dtoc.py b/tools/dtoc/dtoc.py index b3596a5918..f31cba900e
> 100755
> --- a/tools/dtoc/dtoc.py
> +++ b/tools/dtoc/dtoc.py
> @@ -22,7 +22,7 @@ Dtoc produces two output files:
>  This tool is used in U-Boot to provide device tree data to SPL without  increasing
> the code size of SPL. This supports the CONFIG_SPL_OF_PLATDATA  options.
> For more information about the use of this options and tool please -see
> doc/driver-model/of-plat.txt
> +see doc/driver-model/of-plat.rst
>  """
> 
>  from __future__ import print_function
> --
> 2.25.0

Regards
Patrick