[PATCH 0/4] sunxi: R40: Enable USB and Ethernet

[Andre Przywara]

This series enables the USB ports on boards with the Allwinner R40 SoC,
also updates the Bananapi M2 Berry board support.
Patch 1/4 updates the M2 Berry .dts file, so that we get the USB and
Ethernet nodes that we need to enable Ethernet in patch 2/4.
Patch 3/4 adds support for the USB PHY in the R40 SoC, so that the final
patch can enable USB for the two R40 boards that U-Boot supports.

Tested on the Bananapi M2 Berry. I don't have the M2 Ultra, but USB
should work there with this series too. Ethernet was already enabled.

Cheers,
Andre.

Andre Przywara (4):
  sunxi: dts: R40: Update Bananapi M2 Berry .dts
  sunxi: defconfig: Bananapi M2 Berry: enable Ethernet
  phy: sun4i-usb: Add Allwinner R40 support
  sunxi: defconfig: R40 boards: enable USB

 arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | 135 ++++++++++++++++++++++++---
 arch/arm/mach-sunxi/Kconfig                  |   1 +
 configs/Bananapi_M2_Ultra_defconfig          |   4 +
 configs/bananapi_m2_berry_defconfig          |   6 ++
 drivers/phy/allwinner/phy-sun4i-usb.c        |  12 +++
 5 files changed, 143 insertions(+), 15 deletions(-)

-- 
2.14.5