[PATCH v2 08/19] i2c: designware_i2c: Read device-tree properties
Simon Glass
sjg at chromium.org
Fri Jan 3 23:26:39 CET 2020
The i2c controller defines a few timing properties. Read these in and
store them for use by the driver.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
drivers/i2c/designware_i2c.c | 8 ++++++--
drivers/i2c/designware_i2c.h | 15 +++++++++++++++
drivers/i2c/designware_i2c_pci.c | 2 +-
3 files changed, 22 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c
index 0a1df8015f..34b6816545 100644
--- a/drivers/i2c/designware_i2c.c
+++ b/drivers/i2c/designware_i2c.c
@@ -535,11 +535,15 @@ static int designware_i2c_probe_chip(struct udevice *bus, uint chip_addr,
return ret;
}
-static int designware_i2c_ofdata_to_platdata(struct udevice *bus)
+int designware_i2c_ofdata_to_platdata(struct udevice *bus)
{
struct dw_i2c *priv = dev_get_priv(bus);
- priv->regs = (struct i2c_regs *)devfdt_get_addr_ptr(bus);
+ if (!priv->regs)
+ priv->regs = (struct i2c_regs *)devfdt_get_addr_ptr(bus);
+ dev_read_u32(bus, "i2c-scl-rising-time-ns", &priv->scl_rise_time_ns);
+ dev_read_u32(bus, "i2c-scl-falling-time-ns", &priv->scl_fall_time_ns);
+ dev_read_u32(bus, "i2c-sda-hold-time-ns", &priv->sda_hold_time_ns);
return 0;
}
diff --git a/drivers/i2c/designware_i2c.h b/drivers/i2c/designware_i2c.h
index 1f9940c2ba..55e440f0c0 100644
--- a/drivers/i2c/designware_i2c.h
+++ b/drivers/i2c/designware_i2c.h
@@ -166,10 +166,24 @@ struct dw_scl_sda_cfg {
u32 sda_hold;
};
+/**
+ * struct dw_i2c - private information for the bus
+ *
+ * @regs: Registers pointer
+ * @scl_sda_cfg: Deprecated information for x86 (should move to device tree)
+ * @resets: Resets for the I2C controller
+ * @scl_rise_time_ns: Configured SCL rise time in nanoseconds
+ * @scl_fall_time_ns: Configured SCL fall time in nanoseconds
+ * @sda_hold_time_ns: Configured SDA hold time in nanoseconds
+ * @clk: Clock input to the I2C controller
+ */
struct dw_i2c {
struct i2c_regs *regs;
struct dw_scl_sda_cfg *scl_sda_cfg;
struct reset_ctl_bulk resets;
+ u32 scl_rise_time_ns;
+ u32 scl_fall_time_ns;
+ u32 sda_hold_time_ns;
#if CONFIG_IS_ENABLED(CLK)
struct clk clk;
#endif
@@ -179,5 +193,6 @@ extern const struct dm_i2c_ops designware_i2c_ops;
int designware_i2c_probe(struct udevice *bus);
int designware_i2c_remove(struct udevice *dev);
+int designware_i2c_ofdata_to_platdata(struct udevice *bus);
#endif /* __DW_I2C_H_ */
diff --git a/drivers/i2c/designware_i2c_pci.c b/drivers/i2c/designware_i2c_pci.c
index 7f0625df66..2b974a07c3 100644
--- a/drivers/i2c/designware_i2c_pci.c
+++ b/drivers/i2c/designware_i2c_pci.c
@@ -63,7 +63,7 @@ static int designware_i2c_pci_ofdata_to_platdata(struct udevice *dev)
/* Use BayTrail specific timing values */
priv->scl_sda_cfg = &byt_config;
- return 0;
+ return designware_i2c_ofdata_to_platdata(dev);
}
static int designware_i2c_pci_probe(struct udevice *dev)
--
2.24.1.735.g03f4e72817-goog
More information about the U-Boot
mailing list