[PATCH v3 5/5] board: ti: beagleboneai: enable in am57xx_evm_defconfig

[Caleb Robey]

Adding the configurations to the evm_defconfig file

Signed-off-by: Jason Kridner <jdk at ti.com>
Signed-off-by: Caleb Robey <c-robey at ti.com>
---
v2 Changes:
        - addition of CONFIG_PREBOOT for console configuration
        - removal of changes that hardcoded CONSOLEDEV value

 configs/am57xx_evm_defconfig  | 3 ++-
 include/environment/ti/boot.h | 2 ++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index ae183e9b56..24ab62e235 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@ -16,6 +16,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200 androidboot.console=ttyS2 androidboot.hardware=beagle_x15board"
+CONFIG_PREBOOT="if $board_name=am5729_beaglebonai; then setenv console ttyS0,115200; fi;"
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_MISC_INIT_R is not set
@@ -38,7 +39,7 @@ CONFIG_CMD_BCB=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="am572x-idk"
-CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am572x-idk am571x-idk am574x-idk"
+CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am5729-beagleboneai am572x-idk am571x-idk am574x-idk"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_ENV_OFFSET_REDUND=0x280000
diff --git a/include/environment/ti/boot.h b/include/environment/ti/boot.h
index 684a744f31..6313f3e328 100644
--- a/include/environment/ti/boot.h
+++ b/include/environment/ti/boot.h
@@ -185,6 +185,8 @@
 			"setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;" \
 		"if test $board_name = beagle_x15_revc; then " \
 			"setenv fdtfile am57xx-beagle-x15-revc.dtb; fi;" \
+		"if test $board_name = am5729_beagleboneai; then " \
+			"setenv fdtfile am5729-beagleboneai.dtb; fi;" \
 		"if test $board_name = am572x_idk; then " \
 			"setenv fdtfile am572x-idk.dtb; fi;" \
 		"if test $board_name = am574x_idk; then " \
-- 
2.17.1