[PATCH v2 04/19] i2c: designware_i2c: Rename 'max' speed to 'high' speed
pt
ptchentw at gmail.com
Mon Jan 6 11:24:39 CET 2020
Reviewed-by: Jun Chen <ptchentw at gmail.com>
Simon Glass <sjg at chromium.org> 於 2020年1月4日 週六 上午6:27寫道:
> Some SoCs support a higher speed than what is currently called 'max' in
> this driver. Rename it to 'high' speed, which is the official name of the
> 3.4MHz speed.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
> Changes in v2: None
>
> drivers/i2c/designware_i2c.c | 10 +++++-----
> drivers/i2c/designware_i2c.h | 8 ++++----
> 2 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c
> index 138fc72561..dd1cc0b823 100644
> --- a/drivers/i2c/designware_i2c.c
> +++ b/drivers/i2c/designware_i2c.c
> @@ -62,10 +62,10 @@ static unsigned int __dw_i2c_set_bus_speed(struct
> i2c_regs *i2c_base,
> unsigned int ena;
> int i2c_spd;
>
> - /* Allow max speed if there is no config, or the config allows it
> */
> - if (speed >= I2C_MAX_SPEED &&
> - (!scl_sda_cfg || scl_sda_cfg->has_max_speed))
> - i2c_spd = IC_SPEED_MODE_MAX;
> + /* Allow high speed if there is no config, or the config allows it
> */
> + if (speed >= I2C_HIGH_SPEED &&
> + (!scl_sda_cfg || scl_sda_cfg->has_high_speed))
> + i2c_spd = IC_SPEED_MODE_HIGH;
> else if (speed >= I2C_FAST_SPEED)
> i2c_spd = IC_SPEED_MODE_FAST;
> else
> @@ -80,7 +80,7 @@ static unsigned int __dw_i2c_set_bus_speed(struct
> i2c_regs *i2c_base,
> cntl = (readl(&i2c_base->ic_con) & (~IC_CON_SPD_MSK));
>
> switch (i2c_spd) {
> - case IC_SPEED_MODE_MAX:
> + case IC_SPEED_MODE_HIGH:
> cntl |= IC_CON_SPD_SS;
> if (scl_sda_cfg) {
> hcnt = scl_sda_cfg->fs_hcnt;
> diff --git a/drivers/i2c/designware_i2c.h b/drivers/i2c/designware_i2c.h
> index 39e62bcf51..fcb7dde83a 100644
> --- a/drivers/i2c/designware_i2c.h
> +++ b/drivers/i2c/designware_i2c.h
> @@ -137,16 +137,16 @@ struct i2c_regs {
> /* Speed Selection */
> #define IC_SPEED_MODE_STANDARD 1
> #define IC_SPEED_MODE_FAST 2
> -#define IC_SPEED_MODE_MAX 3
> +#define IC_SPEED_MODE_HIGH 3
>
> -#define I2C_MAX_SPEED 3400000
> +#define I2C_HIGH_SPEED 3400000
> #define I2C_FAST_SPEED 400000
> #define I2C_STANDARD_SPEED 100000
>
> /**
> * struct dw_scl_sda_cfg - I2C timing configuration
> *
> - * @has_max_speed: Support maximum speed (1Mbps)
> + * @has_high_speed: Support high speed (3.4Mbps)
> * @ss_hcnt: Standard speed high time in ns
> * @fs_hcnt: Fast speed high time in ns
> * @ss_lcnt: Standard speed low time in ns
> @@ -154,7 +154,7 @@ struct i2c_regs {
> * @sda_hold: SDA hold time
> */
> struct dw_scl_sda_cfg {
> - bool has_max_speed;
> + bool has_high_speed;
> u32 ss_hcnt;
> u32 fs_hcnt;
> u32 ss_lcnt;
> --
> 2.24.1.735.g03f4e72817-goog
>
>
More information about the U-Boot
mailing list