i.MX8QXP MEK does not boot with latest U-Boot

[Fabio Estevam]

Hi Peng,

On Tue, Dec 17, 2019 at 12:46 PM Fabio Estevam <festevam at gmail.com> wrote:
>
> Hi Peng,
>
> I am trying to boot the latest U-Boot mainline on a imx8qxp mek board
> and this is what I get:
>
> U-Boot SPL 2020.01-rc5-00001-g3dd6a9300b-dirty (Dec 17 2019 - 12:33:57 -0300)
> Normal Boot
> WDT:   Not found!
> Trying to boot from MMC2_2
> Load image from MMC/SD 0x46800
>
> U-Boot 2020.01-rc5-00001-g3dd6a9300b-dirty (Dec 17 2019 - 12:33:57 -0300)
>
> CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz at 31C
>
> Model: Freescale i.MX8QXP MEK
> Board: iMX8QXP MEK
> Build: SCFW 550f3079, SECO-FW d7523fe8, ATF f92d379
> Boot:  SD1
> DRAM:  3 GiB
> Failed to enable ipg clk
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> Loading Environment from MMC... *** Warning - bad CRC, using default environment
>
> In:    serial at 5a060000
> Out:   serial at 5a060000
> Err:   serial at 5a060000
> Net:   Failed to enable ipg clk
>
> Error: ethernet at 5b040000 address not set.
>
> (It hangs here).
>
> I am using the SC and seco firmware from the 4.19.35 release.
>
> Here is the updated README that I am following:
> http://code.bulix.org/i8bhp8-1018627
>
> Any ideas as to how to fix this boot problem?

Did you have a chance to look at this boot regression?

Thanks