[PATCH] omap34xx: SPL: enable MMC raw boot with u-boot.img
Denis 'GNUtoo' Carikli
GNUtoo at cyberdimension.org
Tue Jan 7 17:56:35 CET 2020
On Sun, 10 Nov 2019 01:48:17 +0100
Denis 'GNUtoo' Carikli <GNUtoo at cyberdimension.org> wrote:
> The following commit enabled raw SPL booting:
> 22d90d560a omap3: Use raw SPL by default for mmc1
> but it was reverted by the following commit:
> 821c89d38c Revert "omap3: Use raw SPL by default for mmc1"
> because SPL is unable to distinguish between RAW images and
> garbage.
>
> However if CONFIG_SPL_RAW_IMAGE_SUPPORT is disabled, SPL does
> identify if there is a valid image with spl_parse_image_header.
>
> With this change, and CONFIG_SPL_RAW_IMAGE_SUPPORT disabled,
> raw MMC boot will be tried first, and if it fails, it FS will
> be tried.
>
> The two scenarios have been tested on a BeagleBoard XM Revision C1.
>
> Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo at cyberdimension.org>
> ---
> arch/arm/mach-omap2/boot-common.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/boot-common.c
> b/arch/arm/mach-omap2/boot-common.c index 734fa9d9e6..a48244e1c5
> 100644 --- a/arch/arm/mach-omap2/boot-common.c
> +++ b/arch/arm/mach-omap2/boot-common.c
> @@ -132,8 +132,10 @@ void save_omap_boot_params(void)
> (boot_device <= MMC_BOOT_DEVICES_END)) {
> switch (boot_device) {
> case BOOT_DEVICE_MMC1:
> +#ifdef CONFIG_SPL_RAW_IMAGE_SUPPORT
> boot_mode = MMCSD_MODE_FS;
> break;
> +#endif
> case BOOT_DEVICE_MMC2:
> boot_mode = MMCSD_MODE_RAW;
> break;
Ping.
Denis.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200107/85c77086/attachment.sig>
More information about the U-Boot
mailing list