[U-Boot] [PATCH] defconfigs: Add a config for AM43xx High Security EVM with QSPI Boot support

[Lokesh Vutla]

On 08/01/20 4:24 AM, Andrew F. Davis wrote:
> On AM43xx HS devices, QSPI boot is XIP and we use a single stage
> bootloader. Add a defconfig for this.
> 
> Signed-off-by: Andrew F. Davis <afd at ti.com>

Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>

Thanks and regards,
Lokesh

> ---
>  MAINTAINERS                          |  1 +
>  configs/am43xx_hs_evm_qspi_defconfig | 65 ++++++++++++++++++++++++++++
>  2 files changed, 66 insertions(+)
>  create mode 100644 configs/am43xx_hs_evm_qspi_defconfig
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 438fb225ab..1a9226d9b5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -838,6 +838,7 @@ F:	arch/arm/mach-k3/config_secure.mk
>  F:	configs/am335x_hs_evm_defconfig
>  F:	configs/am335x_hs_evm_uart_defconfig
>  F:	configs/am43xx_hs_evm_defconfig
> +F:	configs/am43xx_hs_evm_qspi_defconfig
>  F:	configs/am57xx_hs_evm_defconfig
>  F:	configs/am57xx_hs_evm_usb_defconfig
>  F:	configs/dra7xx_hs_evm_defconfig
> diff --git a/configs/am43xx_hs_evm_qspi_defconfig b/configs/am43xx_hs_evm_qspi_defconfig
> new file mode 100644
> index 0000000000..5960950142
> --- /dev/null
> +++ b/configs/am43xx_hs_evm_qspi_defconfig
> @@ -0,0 +1,65 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_CPU_INIT=y
> +# CONFIG_SYS_THUMB_BUILD is not set
> +CONFIG_ARCH_OMAP2PLUS=y
> +CONFIG_TI_SECURE_DEVICE=y
> +CONFIG_ISW_ENTRY_ADDR=0x300018e0
> +CONFIG_TI_COMMON_CMD_OPTIONS=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_ENV_SIZE=0x10000
> +CONFIG_DM_GPIO=y
> +CONFIG_AM43XX=y
> +CONFIG_TI_SECURE_EMIF_REGION_START=0xbdb00000
> +CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
> +CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_FIT_IMAGE_POST_PROCESS=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,SERIAL1,QSPI"
> +CONFIG_QSPI_BOOT=y
> +# CONFIG_USE_BOOTCOMMAND is not set
> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
> +# CONFIG_MISC_INIT_R is not set
> +CONFIG_VERSION_VARIABLE=y
> +CONFIG_BOARD_EARLY_INIT_F=y
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_NAND=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_MTDPARTS=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="am43x-epos-evm"
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> +CONFIG_DM=y
> +CONFIG_DFU_MMC=y
> +CONFIG_DFU_RAM=y
> +CONFIG_DFU_SF=y
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_OMAP_HS=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_MTD=y
> +CONFIG_MTD_RAW_NAND=y
> +CONFIG_SF_DEFAULT_SPEED=48000000
> +CONFIG_SPI_FLASH_MACRONIX=y
> +CONFIG_PHY_GIGE=y
> +CONFIG_MII=y
> +CONFIG_DRIVER_TI_CPSW=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_SPI=y
> +CONFIG_TI_QSPI=y
> +CONFIG_TIMER=y
> +CONFIG_OMAP_TIMER=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_OMAP=y
> +CONFIG_USB_DWC3_PHY_OMAP=y
> +CONFIG_OMAP_USB_PHY=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x0403
> +CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00
> +CONFIG_USB_GADGET_DOWNLOAD=y
>