U-Boot: wandboard ethernet problem with newest mainline

[Heiko Schocher]

Hello Stefano, Fabio,

Am 08.01.2020 um 10:54 schrieb Stefano Babic:
> Hi Fabio, Heiko,
> 
> On 08/01/20 10:31, Fabio Estevam wrote:
>> Hi Heiko,
>>
>> On Wed, Jan 8, 2020 at 2:41 AM Heiko Schocher <hs at denx.de> wrote:
>>>
>>> Hi Fabio!
>>>
>>> happy new year! Hope you are fine?
>>>
>>> I just builded the newest mainline U-Boot code for the wandboard, and
>>> I get:
>>>
>>> U-Boot SPL 2020.01-tbot-00271-gd8a3f52 (Jan 08 2020 - 06:33:42 +0100)
>>> Trying to boot from MMC1
>>>
>>>
>>> U-Boot 2020.01-tbot-00271-gd8a3f52 (Jan 08 2020 - 06:33:42 +0100)
>>>
>>> CPU:   Freescale i.MX6DL rev1.3 at 792 MHz
>>> Reset cause: WDOG
>>> DRAM:  1 GiB
>>> PMIC:  pmic_get() ret -19
>>
>> I have already fixed this PMIC issue. Please try this series:
>> https://lists.denx.de/pipermail/u-boot/2019-December/393500.html
>>
>> I thought it would reach 2020.01, but apparently it did not.
>>
> 
> Indeed, I am sure I have already worked and merged the series, but I
> cannot find them, no idea why. I can just apply them now and push on
> -master :-(

With this patch I see the same issue:

U-Boot SPL 2020.01-tbot-00273-g877a689 (Jan 08 2020 - 11:05:27 +0100)
Trying to boot from MMC1


U-Boot 2020.01-tbot-00273-g877a689 (Jan 08 2020 - 11:05:27 +0100)

CPU:   Freescale i.MX6DL rev1.3 at 792 MHz
Reset cause: WDOG
DRAM:  1 GiB
PMIC:  pmic_get() ret -19
MMC:   FSL_SDHC: 2, FSL_SDHC: 1, FSL_SDHC: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
Model: Wandboard i.MX6 Dual Lite Board rev B1
Board: Wandboard rev B1
Net:   Could not get PHY for FEC0: addr 1
No ethernet found.

Hit any key to stop autoboot:  0
=>

I try to dig into it ...

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de