[PATCH] imx: imx8qxp_mek: update README

[Peng Fan]

> Subject: Re: [PATCH] imx: imx8qxp_mek: update README
> 
> Hi Peng,
> 
> On Wed, Jan 8, 2020 at 10:33 PM Peng Fan <peng.fan at nxp.com> wrote:
> 
> > The ipg clk patch needs to be reverted for now. Anyway the log as below:
> 
> Which commit are you referring to? Can you send a revert? Is this revert
> needed for booting this board?
> 
> > U-Boot SPL 2020.01-00025-gedb89b239c-dirty (Jan 08 2020 - 09:50:22
> > +0800) Normal Boot
> > WDT:   Not found!
> > Trying to boot from MMC2_2
> > Load image from MMC/SD 0x46800
> >
> >
> > U-Boot 2020.01-00025-gedb89b239c-dirty (Jan 08 2020 - 09:50:22 +0800)
> 
> I don't see edb89b239c in U-Boot mainline.
> 
> Could you please make sure you use the latest U-Boot mainline in your test?

U-Boot SPL 2020.01-00243-g21aede21b0 (Jan 09 2020 - 10:01:31 +0800)
Normal Boot
WDT:   Not found!
Trying to boot from MMC2_2
Load image from MMC/SD 0x46800


U-Boot 2020.01-00243-g21aede21b0 (Jan 09 2020 - 10:01:31 +0800)

CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz at 20C

Model: Freescale i.MX8QXP MEK
Board: iMX8QXP MEK
Build: SCFW 550f3079, SECO-FW d7523fe8, ATF f900faa
Boot:  SD1
DRAM:  3 GiB
Failed to enable ipg clk
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial at 5a060000
Out:   serial at 5a060000
Err:   serial at 5a060000
Net:   Failed to enable ipg clk

Warning: ethernet at 5b040000 using MAC address from ROM
eth0: ethernet at 5b040000
Hit any key to stop autoboot:  0

Rebased to tom's master branch.

Regards,
Peng.

> 
> Thanks