[PATCH] arm64: zynqmp: Add support for zcu1285 revA board

Michal Simek michal.simek at xilinx.com
Thu Jan 9 10:33:59 CET 2020


zcu1285 is the same as zcu1275 but it is using Avnet FMC
http://www.ultrazed.org/product/network-fmc-module

Unfortunately not everything is connected now that's why this is only
describing system which Xilinx is using.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/dts/Makefile                |   1 +
 arch/arm/dts/zynqmp-zcu1285-revA.dts | 245 +++++++++++++++++++++++++++
 configs/xilinx_zynqmp_virt_defconfig |   2 +-
 3 files changed, 247 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/zynqmp-zcu1285-revA.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a82ba0da9abe..e30186de493b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -281,6 +281,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \
 	zynqmp-zcu111-revA.dtb			\
 	zynqmp-zcu1275-revA.dtb			\
 	zynqmp-zcu1275-revB.dtb			\
+	zynqmp-zcu1285-revA.dtb			\
 	zynqmp-zcu208-revA.dtb			\
 	zynqmp-zcu216-revA.dtb			\
 	zynqmp-zc1232-revA.dtb			\
diff --git a/arch/arm/dts/zynqmp-zcu1285-revA.dts b/arch/arm/dts/zynqmp-zcu1285-revA.dts
new file mode 100644
index 000000000000..9c1801313889
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zcu1285-revA.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP ZCU1285 RevA
+ *
+ * (C) Copyright 2018 - 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek at xilinx.com>
+ * Siva Durga Prasad Paladugu <sivadur at xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP ZCU1285 RevA";
+	compatible = "xlnx,zynqmp-zcu1285-revA", "xlnx,zynqmp-zcu1285",
+		     "xlnx,zynqmp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+		mmc0 = &sdhci1;
+		i2c = &i2c0; /* EMIO */
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ina226-u60 {
+		compatible = "iio-hwmon";
+		io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
+	};
+	ina226-u61 {
+		compatible = "iio-hwmon";
+		io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
+	};
+	ina226-u63 {
+		compatible = "iio-hwmon";
+		io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u64 {
+		compatible = "iio-hwmon";
+		io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	i2c-mux at 75 {
+		compatible = "nxp,pca9548"; /* u22 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+
+		i2c at 0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PMBUS */
+			max20751 at 74 { /* u23 */
+				compatible = "maxim,max20751";
+				reg = <0x74>;
+			};
+			max20751 at 70 { /* u89 */
+				compatible = "maxim,max20751";
+				reg = <0x70>;
+			};
+			max15301 at a { /* u28 */
+				compatible = "maxim,max15301";
+				reg = <0xa>;
+			};
+			max15303 at b { /* u48 */
+				compatible = "maxim,max15303";
+				reg = <0xb>;
+			};
+			max15303 at d { /* u27 */
+				compatible = "maxim,max15303";
+				reg = <0xd>;
+			};
+			max15303 at e { /* u11 */
+				compatible = "maxim,max15303";
+				reg = <0xe>;
+			};
+			max15303 at f { /* u96 */
+				compatible = "maxim,max15303";
+				reg = <0xf>;
+			};
+			max15303 at 11 { /* u47 */
+				compatible = "maxim,max15303";
+				reg = <0x11>;
+			};
+			max15303 at 12 { /* u24 */
+				compatible = "maxim,max15303";
+				reg = <0x12>;
+			};
+			max15301 at 13 { /* u29 */
+				compatible = "maxim,max15301";
+				reg = <0x13>;
+			};
+			max15303 at 14 { /* u51 */
+				compatible = "maxim,max15303";
+				reg = <0x14>;
+			};
+			max15303 at 15 { /* u30 */
+				compatible = "maxim,max15303";
+				reg = <0x15>;
+			};
+			max15303 at 16 { /* u102 */
+				compatible = "maxim,max15303";
+				reg = <0x16>;
+			};
+			max15301 at 17 { /* u50 */
+				compatible = "maxim,max15301";
+				reg = <0x17>;
+			};
+			max15301 at 18 { /* u31 */
+				compatible = "maxim,max15301";
+				reg = <0x18>;
+			};
+		};
+		i2c at 1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* CM_I2C */
+		};
+		i2c at 2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYS_EEPROM */
+			eeprom: eeprom at 54 { /* u101 */
+				compatible = "atmel,24c32"; /* 24LC32A */
+				reg = <0x54>;
+			};
+		};
+		i2c at 3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* FMC1 */
+		};
+		i2c at 4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* FMC2 */
+		};
+		i2c at 5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* ANALOG_PMBUS */
+			u60: ina226 at 40 { /* u60 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u60";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+			u61: ina226 at 41 { /* u61 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u61";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+			u63: ina226 at 42 { /* u63 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u63";
+				reg = <0x42>;
+				shunt-resistor = <1000>;
+			};
+			u65: ina226 at 43 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
+				reg = <0x43>;
+				shunt-resistor = <1000>;
+			};
+			u64: ina226 at 44 { /* u64 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u64";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+		};
+		i2c at 6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* ANALOG_CM_I2C */
+		};
+		i2c at 7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* FMC3 */
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash at 0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+	xlnx,mio_bank = <1>;
+};
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 7e0fcf15c4f5..2327eeee4acf 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -46,7 +46,7 @@ CONFIG_CMD_TIMER=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC"
-CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu208-revA zynqmp-zcu216-revA"
+CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM=y
-- 
2.24.0



More information about the U-Boot mailing list