[PATCH v6 0/6] rockchip: Add Binman support

[Jagan Teki]

On Thu, Jan 9, 2020 at 8:58 PM Wadim Egorov <w.egorov at phytec.de> wrote:
>
> Hi Jagan,
>
> On 09.01.20 14:59, Jagan Teki wrote:
> > On Wed, Jan 8, 2020 at 5:04 PM Wadim Egorov <w.egorov at phytec.de> wrote:
> >> Hi,
> >>
> >> On 07.01.20 10:59, Kever Yang wrote:
> >>> Add Wadim in cc,
> >>>
> >>> Hi Jagan,
> >>>
> >>> After this patch set apply, the phycore-rk3288 board's SPL size is
> >>> overflow:
> >>>
> >>>        arm:  +   phycore-rk3288
> >>> +Error: SPL image is too large (size 0x9000 than 0x8000)
> >>> +Error: Bad parameters for image type
> >>>
> >>> Maybe we need to enable the TPL for this board? @Wadim
> >> I would like it to keep the SPL for the phyCORE board. In this thread
> >> [1] I pointed out that you can drop the phycore_init() function that was
> >> sometimes blowing up the size of the phyCORE SPL image. So if there is
> >> no new other feature that increases the SPL size, we can just remove the
> >> code and the SPL should fit again. If you like I can take a look at this
> >> next week.
> > This won't help much, but one possibility is to use SPL_OF_PLATDATA
> > (I've verified). Can you help us to try as quickly as possible? or do
> > you want us to try?
>
> Or we can simply disable CONFIG_SPL_I2C_SUPPORT and
> CONFIG_SPL_POWER_SUPPORT in the phycore-rk3288_defconfig.

This seems fixed, sent the patches please test the same, thanks!