[PATCH 1/3] gpio: intel_gpio: Pass pinctrl device to pcr_clrsetbits32()

[Wolfgang Wallner]

The function pcr_clrsetbits32() expects a device with a P2SB parent
device.

The currently passed device 'dev' is a gpio-controller with a device
'pinctrl' as parent. This does not match the expectations of
pcr_clrsetbits32(). But he 'pinctrl'-device has a P2SB as parent.

Pass the 'pinctrl' device instead of the 'dev' device to
pcr_clrsetbits32().

Signed-off-by: Wolfgang Wallner <wolfgang.wallner at br-automation.com>
---

 drivers/gpio/intel_gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/intel_gpio.c b/drivers/gpio/intel_gpio.c
index 4bf1c9ddc4..db63115628 100644
--- a/drivers/gpio/intel_gpio.c
+++ b/drivers/gpio/intel_gpio.c
@@ -39,7 +39,7 @@ static int intel_gpio_direction_output(struct udevice *dev, uint offset,
 	struct udevice *pinctrl = dev_get_parent(dev);
 	uint config_offset = intel_pinctrl_get_config_reg_addr(pinctrl, offset);
 
-	pcr_clrsetbits32(dev, config_offset,
+	pcr_clrsetbits32(pinctrl, config_offset,
 			 PAD_CFG0_MODE_MASK | PAD_CFG0_RX_STATE |
 				  PAD_CFG0_TX_DISABLE,
 			 PAD_CFG0_MODE_GPIO | PAD_CFG0_RX_DISABLE |
-- 
2.24.1