[PATCH 04/10] armv7R: K3: r5_mpu: Enable execute permission for MCU0 BTCM

Keerthy j-keerthy at ti.com
Fri Jan 10 11:23:27 CET 2020


Enable execute permission for mcu_r5fss0_core0 BTCM so that we can jump
to a firmware directly from SPL.

Signed-off-by: Keerthy <j-keerthy at ti.com>
---
 arch/arm/mach-k3/r5_mpu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-k3/r5_mpu.c b/arch/arm/mach-k3/r5_mpu.c
index ee076ed877..3d2ff6775a 100644
--- a/arch/arm/mach-k3/r5_mpu.c
+++ b/arch/arm/mach-k3/r5_mpu.c
@@ -26,7 +26,9 @@ struct mpu_region_config k3_mpu_regions[16] = {
 	/* U-Boot's code area marking it as WB and Write allocate */
 	{CONFIG_SYS_SDRAM_BASE, REGION_2, XN_DIS, PRIV_RW_USR_RW,
 	 O_I_WB_RD_WR_ALLOC, REGION_2GB},
-	{0x0, 3, 0x0, 0x0, 0x0, 0x0},
+	/* mcu_r5fss0_core0 BTCM area marking it as WB and Write allocate. */
+	{0x41010000, 3, XN_DIS, PRIV_RW_USR_RW, O_I_WB_RD_WR_ALLOC,
+	 REGION_8MB},
 	{0x0, 4, 0x0, 0x0, 0x0, 0x0},
 	{0x0, 5, 0x0, 0x0, 0x0, 0x0},
 	{0x0, 6, 0x0, 0x0, 0x0, 0x0},
-- 
2.17.1



More information about the U-Boot mailing list