[PATCH 00/20] Add i.MXRT family support

[Giulio Benetti]

Hi Simon,

On 1/9/20 9:04 PM, Simon Glass wrote:
> Hi Giulio,
> 
> On Thu, 9 Jan 2020 at 06:53, Giulio Benetti
> <giulio.benetti at benettiengineering.com> wrote:
>>
>> Hi Simon,
>>
>> On 1/8/20 6:39 PM, Simon Glass wrote:
>>> Hi Giulio,
>>>
>>> On Tue, 7 Jan 2020 at 10:23, Giulio Benetti
>>> <giulio.benetti at benettiengineering.com> wrote:
>>>>
>>>> Hi Stefano, Simon, All,
>>>>
>>>> On 1/3/20 12:39 PM, Stefano Babic wrote:
>>>>> Hi Giulio,
>>>>>
>>>>> On 04/12/19 18:44, Giulio Benetti wrote:
>>>>>> This patchset add support for i.MXRT family starting from i.MXRT1050 SoC.
>>>>>> It provides:
>>>>>> - i.MXRT1050 SoC entry
>>>>>> - i.MXRT pinctrl driver
>>>>>> - i.MXRT serial driver tweaking
>>>>>> - i.MXRT sdram controller driver
>>>>>> - i.MXRT usdhc driver tweaking
>>>>>> - i.MXRT1050-evk initial support
>>>>>>
>>>>>> It uses all DM clocks all around and it loads correctly a basic Linux zImage.
>>>>>>
>>>>>
>>>>> Lukasz has already reviewed most patches, and a V2 is surely WIP. FYI: I
>>>>> archive this first series, and I'll wait for your next V2 - thanks !
>>>>
>>>> I really would like to, but I'm stuck on OF_PLATDATA issue for named
>>>> clocks in SPL, see:
>>>> https://lists.denx.de/pipermail/u-boot/2019-December/394944.html
>>>>
>>>> Is it enough for the moment to keep SPL *without* OF_PLATDATA and
>>>> implement it later?
>>>
>>> It seems fine to me, but the assert() idea should work too.
>>
>> With assert() idea you mean define a header(i.e. imx-clk-names-id.h) like:
>> ```
>> #define IMX_CLK_NAME_PER        0
>> #define IMX_CLK_NAME_IPG        1
>> ...
>> ```
>>
>> And then in non-OF_PLATDATA trying to:
>> ```
>> struct clk per_clk;
>> int ret;
>>
>> ret = clk_get_by_index(dev, IMX_CLK_NAME_PER, &clk);
>> ```
>>
>> And check if clock's name is "per"?
> 
> Well actually the assert would only happen in the non-of-platdata
> code, which would use clk_get_by_name() and then assert that clk.id is
> IMX_CLK_NAME_PER, for example. That would provide a check that the
> of-platdata code is getting the right clock.
> 
> You can't do anything in the of-platdata code since you don't have the names.
> 
> BTW I added noisy_assert() recently which is active even without DEBUG
> defined, so that might be useful.

I can do that, but before I prefer to send v2 patchset and only after 
applied I'd like to work for OF_PLATDATA. I'm also preparing support for 
i.MXRT1020 too, so I don't know what will get for first.

Best regards
-- 
Giulio Benetti
Benetti Engineering sas

> Regards,
> Simon
>