[PATCH v2 13/21] gpio: mxc_gpio: add support for i.MXRT1050

Giulio Benetti giulio.benetti at benettiengineering.com
Fri Jan 10 15:47:03 CET 2020


Add i.MXRT1050 support, there are 5 GPIO banks.

Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
---
V1->V2:
* introduced this patch
---
 drivers/gpio/mxc_gpio.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index 6592d141d3..c924e52f07 100644
--- a/drivers/gpio/mxc_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -41,14 +41,15 @@ static unsigned long gpio_ports[] = {
 #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
 		defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
 		defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || \
-		defined(CONFIG_ARCH_IMX8)
+		defined(CONFIG_ARCH_IMX8) || defined(CONFIG_IMXRT1050)
 	[3] = GPIO4_BASE_ADDR,
 #endif
 #if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
 		defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || \
-		defined(CONFIG_ARCH_IMX8)
+		defined(CONFIG_ARCH_IMX8) || defined(CONFIG_IMXRT1050)
 	[4] = GPIO5_BASE_ADDR,
-#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || defined(CONFIG_IMX8M))
+#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
+		defined(CONFIG_IMX8M) || defined(CONFIG_IMXRT1050))
 	[5] = GPIO6_BASE_ADDR,
 #endif
 #endif
-- 
2.20.1



More information about the U-Boot mailing list