[PATCH 2/2] test: verbatim character entry with CTRL-V

Heinrich Schuchardt xypron.glpk at gmx.de
Sun Jan 12 17:33:39 CET 2020


Provide a unit test checking that CTRL-V can be used to add control
characters to the line buffer.

Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
---
 test/dm/Makefile      |   2 +-
 test/dm/usb_console.c | 150 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 151 insertions(+), 1 deletion(-)
 create mode 100644 test/dm/usb_console.c

diff --git a/test/dm/Makefile b/test/dm/Makefile
index dd1ceff86c..0261424168 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -51,7 +51,7 @@ obj-$(CONFIG_DM_SPI_FLASH) += sf.o
 obj-$(CONFIG_SMEM) += smem.o
 obj-$(CONFIG_DM_SPI) += spi.o
 obj-y += syscon.o
-obj-$(CONFIG_DM_USB) += usb.o
+obj-$(CONFIG_DM_USB) += usb.o usb_console.o
 obj-$(CONFIG_DM_PMIC) += pmic.o
 obj-$(CONFIG_DM_REGULATOR) += regulator.o
 obj-$(CONFIG_TIMER) += timer.o
diff --git a/test/dm/usb_console.c b/test/dm/usb_console.c
new file mode 100644
index 0000000000..c62a05291d
--- /dev/null
+++ b/test/dm/usb_console.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Heinrich Schuchardt <xypron.glpk at gmx.de>
+ *
+ * Tests for the command line interface using the USB keyboard as input.
+ */
+
+#include <common.h>
+#include <cli.h>
+#include <asm/state.h>
+#include <asm/test.h>
+#include <dm/test.h>
+#include <test/ut.h>
+#include <usb.h>
+
+#define SCAN_CODE_END_OF_BUFFER 0xff
+
+struct console_test_data {
+	const char modifiers;
+	const unsigned char scancode;
+};
+
+/**
+ * put_buffer() - copy key strokes to USB keyboard buffer
+ *
+ * @key_strokes:	key strokes
+ * Return:		0 = ok
+ */
+static int put_buffer(const struct console_test_data *key_strokes,
+		      struct unit_test_state *uts)
+{
+	struct udevice *dev;
+	const struct console_test_data *pos;
+
+	ut_assertok(uclass_get_device_by_name(UCLASS_USB_EMUL, "keyb at 3",
+					      &dev));
+	for (pos = key_strokes; pos->scancode != SCAN_CODE_END_OF_BUFFER;
+	     ++pos) {
+		char scancodes[USB_KBD_BOOT_REPORT_SIZE] = {0};
+
+		scancodes[0] = pos->modifiers;
+		scancodes[2] = pos->scancode;
+
+		ut_assertok(sandbox_usb_keyb_add_string(dev, scancodes));
+	}
+	ut_asserteq(1, tstc());
+
+	return 0;
+}
+
+/**
+ * usb_console_setup() - setup for usb keyboard test
+ *
+ * Return:	0 = ok
+ */
+static int usb_console_setup(struct unit_test_state *uts)
+{
+	state_set_skip_delays(true);
+	ut_assertok(usb_init());
+
+	/* Initially there should be no characters */
+	ut_asserteq(0, tstc());
+
+	return 0;
+}
+
+/**
+ * usb_console_teardown() - tear down after usb keyboard test
+ *
+ * Return:	0 = ok
+ */
+static int usb_console_teardown(struct unit_test_state *uts)
+{
+	ut_assertok(usb_stop());
+	return 0;
+}
+
+/**
+ * dm_test_usb_console_verbatim() - test verbatim entry in console
+ *
+ * This test copies the key strokes
+ *
+ *	setenv error '<CTRL-V><ESC>[33;1mError<CTRL-V><ESC>[0m'<ENTER>
+ *
+ * into the buffer of the USB keyboard emulation driver. It then checks if the
+ * string is read into a command line interface buffer as
+ *
+ *	"setenv error '\x1b[33;1mError\x1b[0m'"
+ *
+ * This confirms that <CTRL-V> can be used for verbatim input of control
+ * characters.
+ *
+ * @uts:	unit test state
+ * Return:	0 on success
+ */
+static int dm_test_usb_console_verbatim(struct unit_test_state *uts)
+{
+	char buffer[CONFIG_SYS_CBSIZE + 1]; /* console I/O buffer */
+	const struct console_test_data con_test_data[] = {
+		{0x00, 0x16}, /* s */
+		{0x00, 0x08}, /* e */
+		{0x00, 0x17}, /* t */
+		{0x00, 0x08}, /* e */
+		{0x00, 0x11}, /* n */
+		{0x00, 0x19}, /* v */
+		{0x00, 0x2c}, /*   */
+		{0x00, 0x08}, /* e */
+		{0x00, 0x15}, /* r */
+		{0x00, 0x00}, /*   */
+		{0x00, 0x15}, /* r */
+		{0x00, 0x12}, /* o */
+		{0x00, 0x15}, /* r */
+		{0x00, 0x2c}, /*   */
+		{0x00, 0x34}, /* ' */
+		{0x01, 0x19}, /* <CONTROL><V> */
+		{0x00, 0x29}, /* <ESC> */
+		{0x00, 0x2F}, /* [ */
+		{0x00, 0x20}, /* 3 */
+		{0x00, 0x00}, /*   */
+		{0x00, 0x20}, /* 3 */
+		{0x00, 0x33}, /* ; */
+		{0x00, 0x1E}, /* 1 */
+		{0x00, 0x10}, /* m */
+		{0x20, 0x08}, /* E */
+		{0x00, 0x15}, /* r */
+		{0x00, 0x00}, /*   */
+		{0x00, 0x15}, /* r */
+		{0x00, 0x12}, /* o */
+		{0x00, 0x15}, /* r */
+		{0x01, 0x19}, /* <CONTROL><V> */
+		{0x00, 0x29}, /* <ESC> */
+		{0x00, 0x2F}, /* [ */
+		{0x00, 0x27}, /* 0 */
+		{0x00, 0x10}, /* m */
+		{0x00, 0x34}, /* ' */
+		{0x00, 0x28}, /* <ENTER> */
+		/* End of list */
+		{0x00, SCAN_CODE_END_OF_BUFFER}
+	};
+
+	ut_assertok(usb_console_setup(uts));
+	ut_assertok(put_buffer(con_test_data, uts));
+	ut_asserteq(31, cli_readline_into_buffer("", buffer, 0));
+	ut_asserteq_str("setenv error '\x1b[33;1mError\x1b[0m'", buffer);
+	ut_asserteq(0, tstc());
+	ut_assertok(usb_console_teardown(uts));
+
+	return 0;
+}
+DM_TEST(dm_test_usb_console_verbatim, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
--
2.24.1



More information about the U-Boot mailing list