imx8qxp mek: Booting mainline kernel with mainline U-Boot

[Fabio Estevam]

Hi Peng,

Have you managed to boot a mainline kernel with mainline U-Boot on a
imx8qxp mek?

Here is what I get:

U-Boot SPL 2020.01-00369-ge80a8b0222-dirty (Jan 13 2020 - 12:30:21 -0300)
Normal Boot
WDT:   Not found!
Trying to boot from MMC2_2
Load image from MMC/SD 0x46800


U-Boot 2020.01-00369-ge80a8b0222-dirty (Jan 13 2020 - 12:30:21 -0300)

CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz at 32C

Model: Freescale i.MX8QXP MEK
Board: iMX8QXP MEK
Build: SCFW 550f3079, SECO-FW d7523fe8, ATF 70fa7bc
Boot:  SD1
DRAM:  3 GiB
Failed to enable ipg clk
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    serial at 5a060000
Out:   serial at 5a060000
Err:   serial at 5a060000
Net:   Failed to enable ipg clk

Warning: ethernet at 5b040000 (eth0) using random MAC address - e2:9c:db:94:fc:d5
eth0: ethernet at 5b040000
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
26221056 bytes read in 1134 ms (22.1 MiB/s)
Booting from mmc ...
13953 bytes read in 14 ms (972.7 KiB/s)
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Using Device Tree in place at 0000000083000000, end 0000000083006680

Starting kernel ...
[It hangs here]

Booting a NXP kernel also did not work.

Any ideas?

Regards,

Fabio Estevam