[PATCH v2 16/21] serial_lpuart: add support for i.MXRT

sbabic at denx.de sbabic at denx.de
Wed Jan 15 13:46:22 CET 2020


> Add i.MXRT compatible string and cpu type support to lpuart driver,
> to use little endian 32 bits configurations.
> Also according to RM, the Receive RX FIFO Enable (RXFE) field in LPUART
> FIFO register is bit 3, so this definition should change to 0x08 as done
> for i.MX8. It needs also to set baudrate the same way as i.MX8 does.
> Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list