[PATCH v2] mx6ul_14x14_evk: Fix SPL boot hang

sbabic at denx.de sbabic at denx.de
Wed Jan 15 13:47:46 CET 2020


> Currently the following SPL hang is observed:
> U-Boot SPL 2020.01-rc5-00079-g797eee36a1 (Jan 06 2020 - 11:24:09 -0300)         
> Trying to boot from MMC1                                                        
> Card did not respond to voltage select!                                         
> spl: mmc init failed with error: -95                                            
> SPL: failed to boot from all boot devices                                       
> ### ERROR ### Please RESET the board ### 
> Fix it by moving the eSDHC2 initialization to SPL.
> While at it, since this board uses DM_MMC all the esdhc board
> code can be removed to make the code simpler.
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list