[RFC PATCH] imx: imx8mm-evk/imx8mn-evk: enable sysreset driver for SPL
Simon Glass
sjg at chromium.org
Thu Jan 16 01:10:56 CET 2020
On Thu, 16 Jan 2020 at 03:50, Claudius Heine <ch at denx.de> wrote:
>
> Hi,
>
> I have only tested compiling, but if the reset in the SPL on i.MX8MM and
> i.MX8MN still works with this patch applied, then we don't need board
> specific 'do_reset' function and special configurations flags for this
> case.
>
> I currently don't have access to the hardware to test this.
>
> regards,
> Claudius
>
> -- >8 --
> Subject: [RFC PATCH] imx: imx8mm-evk/imx8mn-evk: enable sysreset driver for
> SPL
>
> Instead of implementing a custom reset function for the SPL, it can
> directly use the sysreset DM driver.
>
> Signed-off-by: Claudius Heine <ch at denx.de>
> ---
> arch/arm/mach-imx/imx8m/soc.c | 19 -------------------
> board/freescale/imx8mm_evk/spl.c | 9 ---------
> board/freescale/imx8mn_evk/spl.c | 9 ---------
> configs/imx8mm_evk_defconfig | 1 +
> configs/imx8mn_ddr4_evk_defconfig | 1 +
> 5 files changed, 2 insertions(+), 37 deletions(-)
Reviewed-by: Simon Glass <sjg at chromium.org>
More information about the U-Boot
mailing list