[PATCH] clk: sci-clk: add slack to clk-set-rate passed to firmware

[Lokesh Vutla]

Add slack to the clock frequency parameters passed to firmware within
clk_set_rate. min-freq is changed to 0 and max-rate is changed to
ULONG_MAX. This fixes certain issues with pll clock rounding when the
firmware is not able to set the frequency exactly to the target, the
current implementation fails if the available frequency is even 1Hz off
the target. With the change, the firmware still tries its best to set
the frequency as close as possible to the target.

Reported-by: Vishal Mahaveer <vishalm at ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
 drivers/clk/clk-ti-sci.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/clk/clk-ti-sci.c b/drivers/clk/clk-ti-sci.c
index 478349f22f..ed1facbbcd 100644
--- a/drivers/clk/clk-ti-sci.c
+++ b/drivers/clk/clk-ti-sci.c
@@ -106,8 +106,7 @@ static ulong ti_sci_clk_set_rate(struct clk *clk, ulong rate)
 	k3_avs_notify_freq(clk->id, clk->data, rate);
 #endif
 
-	/* Ask for exact frequency by using same value for min/target/max */
-	ret = cops->set_freq(sci, clk->id, clk->data, rate, rate, rate);
+	ret = cops->set_freq(sci, clk->id, clk->data, 0, rate, ULONG_MAX);
 	if (ret)
 		dev_err(clk->dev, "%s: set_freq failed (%d)\n", __func__, ret);
 
-- 
2.23.0