[PATCH v2 11/21] dts: mtmips: remove all unusable nodes and properties from mt7628s.dtsi

[Weijie Gao]

This patch removes all unused and unusable nodes and properties from
mt7628s.dtsi.

Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>
---
Changes since v1: splitted from another patch
---
 arch/mips/dts/mt7628a.dtsi | 68 --------------------------------------
 1 file changed, 68 deletions(-)

diff --git a/arch/mips/dts/mt7628a.dtsi b/arch/mips/dts/mt7628a.dtsi
index cdc643fe37..3d7b839e6d 100644
--- a/arch/mips/dts/mt7628a.dtsi
+++ b/arch/mips/dts/mt7628a.dtsi
@@ -7,24 +7,6 @@
 	#size-cells = <1>;
 	compatible = "ralink,mt7628a-soc";
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu at 0 {
-			compatible = "mti,mips24KEc";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	cpuintc: interrupt-controller {
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		compatible = "mti,cpu-interrupt-controller";
-	};
-
 	clk48m: clk48m at 0 {
 		compatible = "fixed-clock";
 
@@ -41,11 +23,6 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		sysc: system-controller at 0 {
-			compatible = "ralink,mt7620a-sysc", "syscon";
-			reg = <0x0 0x100>;
-		};
-
 		resetctl-reboot {
 			compatible = "resetctl-reboot";
 
@@ -223,32 +200,6 @@
 
 			resets = <&rstctrl MT7628_TIMER_RST>;
 			reset-names = "wdt";
-
-			interrupt-parent = <&intc>;
-			interrupts = <24>;
-		};
-
-		intc: interrupt-controller at 200 {
-			compatible = "ralink,rt2880-intc";
-			reg = <0x200 0x100>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			resets = <&rstctrl MT7628_INT_RST>;
-			reset-names = "intc";
-
-			interrupt-parent = <&cpuintc>;
-			interrupts = <2>;
-
-			ralink,intc-registers = <0x9c 0xa0
-						 0x6c 0xa4
-						 0x80 0x78>;
-		};
-
-		memory-controller at 300 {
-			compatible = "ralink,mt7620a-memc";
-			reg = <0x300 0x100>;
 		};
 
 		gpio at 600 {
@@ -261,9 +212,6 @@
 			resets = <&rstctrl MT7628_PIO_RST>;
 			reset-names = "pio";
 
-			interrupt-parent = <&intc>;
-			interrupts = <6>;
-
 			gpio0: bank at 0 {
 				reg = <0>;
 				compatible = "mtk,mt7621-gpio-bank";
@@ -311,9 +259,6 @@
 			resets = <&rstctrl MT7628_UART0_RST>;
 			reset-names = "uart0";
 
-			interrupt-parent = <&intc>;
-			interrupts = <20>;
-
 			reg-shift = <2>;
 		};
 
@@ -329,9 +274,6 @@
 			resets = <&rstctrl MT7628_UART1_RST>;
 			reset-names = "uart1";
 
-			interrupt-parent = <&intc>;
-			interrupts = <21>;
-
 			reg-shift = <2>;
 		};
 
@@ -347,9 +289,6 @@
 			resets = <&rstctrl MT7628_UART2_RST>;
 			reset-names = "uart2";
 
-			interrupt-parent = <&intc>;
-			interrupts = <22>;
-
 			reg-shift = <2>;
 		};
 	};
@@ -361,8 +300,6 @@
 
 		resets = <&rstctrl MT7628_EPHY_RST>;
 		reset-names = "ephy";
-
-		syscon = <&sysc>;
 	};
 
 	usb_phy: usb-phy at 10120000 {
@@ -371,8 +308,6 @@
 
 		#phy-cells = <0>;
 
-		ralink,sysctl = <&sysc>;
-
 		resets = <&rstctrl MT7628_UPHY_RST>;
 		reset-names = "phy";
 
@@ -386,9 +321,6 @@
 
 		phys = <&usb_phy>;
 		phy-names = "usb";
-
-		interrupt-parent = <&intc>;
-		interrupts = <18>;
 	};
 
 	mmc: mmc at 10130000 {
-- 
2.17.1