[PATCH v2 14/21] mips: enable support for appending dtb to spl binary

[Weijie Gao]

If CONFIG_SPL_OF_CONTROL is enabled for SPL and CONFIG_OF_SEPARATE is also
enabled, the dtb will be appended to the u-boot-spl.bin.

When calling dm_init_and_scan() in SPL, fdtdec_setup() will try to locate
dtb at the end of u-boot-spl.bin, by referencing to _image_binary_end.

However _image_binary_end is currently missing in u-boot-spl.lds.
This patch adds _image_binary_end to u-boot-spl.lds to make sure linking
u-boot-spl will not fail.

Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>
---
Changes since v1: newly added
---
 arch/mips/cpu/u-boot-spl.lds | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/mips/cpu/u-boot-spl.lds b/arch/mips/cpu/u-boot-spl.lds
index d08d6222c4..e467491639 100644
--- a/arch/mips/cpu/u-boot-spl.lds
+++ b/arch/mips/cpu/u-boot-spl.lds
@@ -37,6 +37,8 @@ SECTIONS
 	. = ALIGN(4);
 	__image_copy_end = .;
 
+	_image_binary_end = .;
+
 	.bss (NOLOAD) : {
 		__bss_start = .;
 		*(.bss*)
-- 
2.17.1